Postuler

Publié hier

Automation Specialist (Direct Hire)

@ Express Employment Professionals

Cambridge, Ontario

Temps pleinContrat
Postuler
SIGNAUX

En bref

Express Employment Professionals is hiring an Automation Specialist on a direct-hire basis for its client, an engineering firm. The role covers mechanical and electrical design, PLC/HMI programming, robotics and motion-control commissioning, and project coordination. Travel is occasional and may be extensive, and customer support may be needed after hours and on weekends.

Responsabilités :

  • Design and program PLC, PAC and HMI systems
  • Program robotic systems and motion-control drives
  • Commission and test automation systems on site
  • Manage small projects and coordinate with account managers
  • Complete purchasing requisitions per company policy

Résumé des exigences :

  • Post-secondary diploma in engineering, automation or robotics
  • Automation experience with electrical drawing review
  • Strong PLC, HMI and SCADA coding skills
  • Strong troubleshooting and organizational skills
  • Ability to coach subordinate team members

Outils et compétences

Source et dates

Site carrière / système de candidatures · careerpage

Date publiée par l’employeur
2026-11-15
Première détection par notre source
2026-11-16
Mise à jour du dossier source
2026-11-16

Ces dates décrivent le dossier source, pas une vérification en direct du recrutement. Consultez l’offre originale.

Détails du poste

NiveauSenior
DomaineGénie
Gestion d’équipeOui
Heures par semaine40 (estimé)
Horairejour, soir, fins de semaine
Déplacementsavion : modérés · route : modérés
Milieu de travailUsine, Chez les clients, Bureau
PositionAssis et debout
Exigences physiquesphysique modéré · ordinateur élevé
LanguesEnglish
FormationCollégial (DEC) (exigé)
Domaines d’étudesEngineering, Automation, Robotics

Résumé et détails rédigés par l’IA à partir de l’offre; l’offre de l’employeur fait foi.

Express Employment Professionals

Profil d’entreprise sauvegardé

Renseignements historiques provenant d’un profil The Jobs API sauvegardé (champs LinkedIn/Crunchbase). Ils ne sont pas vérifiés en temps réel; les chiffres peuvent avoir changé. Les valeurs manquantes restent inconnues.

To help as many people as possible find good jobs by helping as many clients as possible find good people.

Description complète de l’entreprise

Founded in 1983 and corporately headquartered in Oklahoma City, Express Employment International supports the Express Employment Professionals franchise and related brands. The Express franchise brand is an industry-leading, international staffing company with franchise locations across the U.S., Canada, South Africa, Australia and New Zealand. Express International boasts a team of more than 500 professionals in Oklahoma City, and a network of sales and support teams internationally. Express Employment Professionals, our flagship franchise, has more than 870 franchise locations and began franchising in 1985 to deliver staffing support and human resource services through a network of franchise office owners. Express helps people find good jobs and companies find good people, and offers a full range of employment solutions, including evaluation hire, temporary staffing, professional search, and human resources for businesses around the globe. Focusing on a wide range of positions, Express' long-term goal is to put a million people to work annually.

Abonnés LinkedIn
189 455
Personnes associées sur LinkedIn
14 384
Bureaux déclarés
  • 9701 Boardwalk Boulevard, Oklahoma City, OK 73162, US
Autres noms enregistrés
  • Express Employment International Headquarters
  • Express Employment International
Spécialités
  • professional
  • administrative
  • commercial
  • employment
  • jobs
  • staffing
  • personnel
  • career
  • hiring
  • workforce
  • placement
  • temporary
  • human resources
  • skilled trades
  • direct hire
  • light industrial
  • and office services
Le profil indique une agence de recrutement
Oui

Founded in 1983 and corporately headquartered in Oklahoma City, Express Employment International supports the Express Employment Professionals franchise and related brands. The Express franchise brand is an industry-leading, international staffing company with franchise locations across the U.S., Canada, South Africa, Australia and New Zealand. Express International boasts a team of more than 500 professionals in…

ChampValeur
SecteurStaffing and Recruiting
Taille10,001+ employees
Siège socialOklahoma City, OK
Type d’organisationPrivately Held
Fondée en1983
Spécialitésprofessionaladministrativecommercialemploymentjobsstaffingpersonnelcareerhiringworkforce
Offres sur Jobsy373
LinkedInVoir la page
Description

Overview – Our Client is committed to delivering top-tier engineering solutions to our clients across various industries. With a dedicated team of experts and a wealth of experience, we provide a comprehensive range of services tailored to meet the unique needs of each project. From mechanical and electrical engineering to project management and technical support, we strive for excellence in every aspect of our work.

About the Role - The role of a Senior Automation Specialist is crucial in ensuring the smooth execution of projects within an engineering context. Being responsible for the Engineering Lead underscores their significance in the technical hierarchy, highlighting their expertise and accountability for project-related technicalities. This dual capacity of working independently and collaboratively underscores their adaptability to project needs, showcasing their versatility and flexibility in addressing varied project requirements.

Key Duties and Responsibilities –

Operations

· Participate in the mechanical and electrical design, programming and commissioning of projects.

· Develop structures and systems within the execution side of the business to promote efficiencies and to strive for constant improvement.

· Manage and monitor small-sized projects and coordinate with the Account Managers to maintain an efficient level of staffing.

· Monitor the project management of costs, deliverables, scope change, schedule, and completion timelines are also within the domain of responsibility for projects sold.

· Complete Purchasing Requisitions on the required forms with sufficient detail to cover all requisite requirements, when completing paperwork group materials separately to assist in identifying purchase requirements all in accordance with company policies and procedures.

· Learn and apply the requirements of each of the various industries in which we work including, but not limited to, the Good Manufacturing Practices, the Generally Accepted Automation Practices, the Safety and Environmental Practices, the hardware, the software requirements, and the terminologies.

· Travel both locally and internationally to support customers as required. Although not always regular, the potential for travel does exist and at times can be extensive.

· Support customers during regular hours, after hours and on weekends as required.

Technical

· Participate in the mechanical engineering and design of projects including following in house design protocols, completion of robotic cell layouts, including reach studies, part handling concepts and design, machined component design and material specification, hydraulic and pneumatic design and component specification, fastener and fitting specification, bill of materials and any other design documentation required.

· Participate in the electrical engineering and design of projects including completion of power calculations, circuit sizing, fusing requirements, component evaluation and selection, panel layouts, bill of materials, automation architectures, communication network layouts, cable schedules and any other design documentation required.

· Participate in the programming of Programmable Logic Controllers (PLC’s), Programmable Automation Controllers (PAC’s), Human Machine Interfaces (HMI’s) as well as proprietary automation controllers. Programming these systems includes meeting with customers to establish their specific requirements, reviewing the controls and hardware design for the system, preparing logic (either from scratch or based on customer templates) in the office, testing and/or simulating the logic prior to going to site and finally debugging and commissioning the software at the customers’ location.

· Participate in the programming of Robotic Systems including pick and place units and multi-axis robots including preparation of software, setup and calibration and testing of equipment on site.

· Participate in the programming, setup, testing and commissioning of drives and motors including servo systems, variable frequency drives, across the line starters, soft starts and any other form of motion control specified for a project. This includes research into the functionality of each system, learning and practicing safe startup procedures for each device and successfully implementing each device as part of an overall automation solution.

· Participate in the commissioning and testing of systems on site. This includes utilizing test and calibration equipment to determine the status of various components, debugging circuits and providing direction to others on the corrective action required or applying corrective action yourself (where permitted and safe to do so.) g. Provide technical support to customers who have questions about automation systems with which we have previous experience or have competent knowledge of. Technical support may be handled over the phone, via email or in person on site as the project requires.

Skills and Qualifications –

· Requires a post-secondary diploma or an equivalent level of literacy relating to the fields of Engineering, Automation and/or Robotics.

· Working knowledge of computerized reporting systems and word process/spreadsheet software will be mandatory.

· Ability to organize the various functions for which the position is responsible – must be a detailed individual.

· Ability to resist stress created by unequal workloads and maintain a persistent and pleasant disposition with customers, management, field and office employees.

· Requires strong mechanical and electrical aptitudes and experience in the automation industry, specifically with regard to electrical drawing review, standard coding practices for PLC and HMI’s / SCADA systems typically found in industrial control systems.

· Ability to work with a multitude of different vendors’ hardware to execute required duties and responsibilities.

· Strong troubleshooting skills, quick and decisive learning curve regarding drawings and systems previously completed by others.

· Ability to manage time effectively and work closely coordinating with other departments and individuals.

· Ability to coach subordinate team members and provide feedback and direction on their development and training.

· Although the majority of our Client’s workload will be domestic (within 4 hours of travel from head office), some traveling from time to time may be required.

Emplois semblables

  • Automation Specialist F/M

    Etobicoke, ON
    Temps plein

    Alstef Group

    5+ ansAlstef Group needs a university degree or college diploma in industrial automation, with 5 to 7 years of experience in baggage or parcel handling preferred. Candidates need hands-on Siemens and Allen-Bradley PLC skills, Profinet and Profibus knowledge, advanced English, and a valid passport for travel.

    PLC, HMI, SCADA, Siemens Simatic, TIA Portal, WinCC

  • Automation Specialist

    Windsor, ON

    Sonepar

    Candidates need an electrical engineering technology diploma or equivalent experience, and five years of automation or technical sales experience is an asset. Sonepar also wants strong technical knowledge of industrial automation, commercial skill in closing deals, and clear communication with engineers and business leaders.

    Rockwell Automation products, CRM

  • Automation Specialist

    Ontario
    Sur placeTemps plein

    Maple Leaf Foods Inc.

    Candidates need a diploma in industrial automation, electro-mechanical engineering technology or industrial electrical work. Allen-Bradley certification is an asset, and flexible availability for evenings and weekends is required.

    PLC, HMI, SCADA, VFD, AutoCAD

  • Automation Specialist

    Windsor, ON
    Temps plein

    DataRealm

    3+ ansCandidates need a bachelor's degree in manufacturing, electrical or computer engineering (or equivalent) and 3+ years of automation or controls experience. They should know PLC and HMI programming for Siemens and Rockwell, vision systems such as Cognex and Keyence, and CAD software, and communicate clearly with customers.

    PLC, HMI, SCADA, Siemens, Rockwell, Cognex

  • Automation Specialist

    Vaughan, ON

    Amprod LLC

    5+ ansCandidates need at least five years in automation or controls engineering, strong PLC and HMI programming skills and experience with Allen Bradley, Omron or Siemens platforms. They also need a relevant engineering degree and the willingness to travel to customer locations.

    PLC, HMI, AutoCAD, Microsoft Office

  • Automation Specialist

    Vaughan, ON

    Koch Enterprises Family of Companies

    5+ ansCandidates need a bachelor's degree in an engineering field and at least 5 years of automation or controls experience. Strong PLC and HMI programming skills on Allen Bradley, Omron or Siemens platforms are required, along with the ability to travel to customer sites.

    PLC, HMI, AutoCAD, Microsoft Office, Allen Bradley, Omron

  • Automation Specialist

    Toronto, ON

    Leap Recruitment Partners

    5+ ansCandidates need a three-year diploma in Electro-Mechanical Technology and at least 5 years of maintenance or automation experience. They also need PLC, pneumatic, hydraulic and low-voltage electrical skills, the ability to read blueprints, forklift operation, and lock-out knowledge.

    PLC, forklift, blueprints

  • Senior Automation Specialist

    Cambridge, ON
    80k–95k $/an

    STRIVE Recruitment: STRIVE is a specialist recruitment firm offering proactive recruitment solutions in the areas of Accounting & Finance, Corporate Administration,…

    5+ ansCandidates need 5+ years of hands-on industrial automation experience, strong Siemens PLC programming and industrial robot integration experience. They also need commissioning, troubleshooting and mentoring experience, and must be willing to travel to customer sites.

    Siemens PLC, HMI, industrial robots, VFD, servo drives, soft starters

Lieux et modes de travail

Lieux

Tout le CanadaTélétravail · Hybride · Sur place · Sur le terrain

Astuce : ajoutez le télétravail pour élargir la recherche.

Exclure des lieux

Mode de travail

Offres de cette entreprise dans les résultats

Voici les offres de cette entreprise chargées dans votre recherche. Elle peut avoir d’autres postes ouverts.