Postuler

Publié il y a 10 jours

Electrical Engineer - Power System Studies

@ GE Vernova

Alberta · British Columbia · Manitoba · New Brunswick · Newfoundland and Labrador +1

Temps plein2+ ans d’expérience
Postuler
SIGNAUX

En bref

GE Vernova is hiring a Power System Engineer to perform power system studies for high-voltage and extra-high-voltage substations, supporting senior engineers on load flow, short circuit, transient, harmonic, and arc flash studies. The role is full-time and remote in Canada, with up to 10% travel, and pay between $75,900 and $126,500 CAD plus a discretionary annual bonus.

Responsabilités :

  • Perform power system studies for EHV and HV substations
  • Run load flow, short circuit, transient and harmonic studies
  • Conduct arc flash studies and cable selection
  • Support senior engineers and project documentation

Résumé des exigences :

  • Bachelor's degree in electrical engineering with power systems coursework
  • 2 to 3 years of network or transient study experience
  • Proficiency in PSCAD, PSS/E, ETAP or DIgSILENT PowerFactory
  • Ability to travel up to 10%, including internationally

Outils et compétences

Avantages mentionnés

Assurance maladieSoins dentairesSoins de la vueAssurance vieAssurance invaliditéRégime de retraiteProgramme d’aideCongés payésCongé parentalAide aux études
Source et dates

Site carrière / système de candidatures · paradox

Date publiée par l’employeur
2026-10-30
Première détection par notre source
2026-10-16
Mise à jour du dossier source
2026-10-30

Ces dates décrivent le dossier source, pas une vérification en direct du recrutement. Consultez l’offre originale.

Détails du poste

NiveauDébutant
DomaineGénie
Expérience2 an(s) et plus
Heures par semaine40 (estimé)
Déplacementsavion : minimes · route : aucun
Milieu de travailDomicile, Chez les clients
PositionSurtout assis
Exigences physiquesphysique faible · ordinateur élevé
LanguesEnglish
Candidatures encouragéesAutochtones
FormationBaccalauréat (exigé), Maîtrise (préféré)
Domaines d’étudeselectrical engineering, power systems, power electronics
Avantages mentionnésCongés payés généreux, Congé parental généreux, Régime de retraite, Aide aux études, Prime de rendement, Mieux-être

Résumé et détails rédigés par l’IA à partir de l’offre; l’offre de l’employeur fait foi.

GE Vernova

Profil d’entreprise sauvegardé

Renseignements historiques provenant d’un profil The Jobs API sauvegardé (champs LinkedIn/Crunchbase). Ils ne sont pas vérifiés en temps réel; les chiffres peuvent avoir changé. Les valeurs manquantes restent inconnues.

Description complète de l’entreprise

GE Vernova is a purpose-built energy technology company on a mission to electrify to thrive and decarbonize the world. It is made up of three businesses -- Power, Wind, and Electrification -- with focus on accelerating the path to more reliable, affordable, and sustainable energy, while helping our customers power economies and deliver the electricity that is vital to health, safety, security, and improved quality of life. The world needs more energy, smarter energy. With energy demand expected to grow by more than 50% in the next 20 years, we are continuously innovating to meet the moment…like we have for the past 130 years. The Energy of Change and relentless optimism are what drive us – it’s about never giving up and seeing what’s possible so that we deliver the energy technologies the world needs right now and for generations to come. GE Vernova’s attitude and edge is embedded in its name. We retain our treasured legacy, “GE,” as an enduring and hard-earned badge of quality and ingenuity. “Ver” / “verde” signal Earth’s verdant and lush ecosystems. “Nova,” from the Latin “novus,” nods to a new, innovative era of lower carbon energy that GE Vernova will help deliver. Together, we have the energy to change the world.

Abonnés LinkedIn
3 360 832
Personnes associées sur LinkedIn
60 425
Bureaux déclarés
  • 58 Charles St, Boston, Massachusetts 02141, US
Catégories d’activité
  • Energy Management
  • Sustainability
  • Energy
  • Energy Efficiency
Autres noms enregistrés
  • GE Vernova
Le profil indique une agence de recrutement
Non
Investissement total déclaré
2 607 680 000

La devise et la date d’observation ne sont pas fournies; ce n’est ni une valorisation actuelle ni une ronde de financement.

GE Vernova is a purpose-built energy technology company on a mission to electrify to thrive and decarbonize the world. It is made up of three businesses -- Power, Wind, and Electrification -- with focus on accelerating the path to more reliable, affordable, and sustainable energy, while helping our customers power economies and deliver the electricity that is vital to health, safety, security, and improved quality…

ChampValeur
SecteurElectric Power Generation
Taille10,001+ employees
Siège socialBoston, Massachusetts
Type d’organisationPublic Company
Offres sur Jobsy116
LinkedInVoir la page
Description

Job Description Summary

As a Power System Engineer, your main responsibility is to perform power system studies for high-voltage (HV) substations while ensuring reliability, efficiency, and compliance with industry standards and regulations. Cross-functional collaboration with other engineers and support for project documentation and continuous improvement initiatives are also key aspects of this role.

Job Description

Essential Responsibilities:

The Power System Engineer will play a key role in supporting projects execution for EHV/HV Substations. This individual will be responsible for power system studies and calculations using power system software.

  • Perform in depth system studies listed below; and support the Senior Power system Engineers for the studies below:
    • Main Circuit Parameters
    • Load Flow, Reactive Power Capability and Compensation, Power Factor Study
    • Short Circuit Study /Combined Short Circuit Ratio (CSCR) Study
    • Transient Switching and Insulation Coordination Study (including Transient Overvoltage and Recovery Voltage Analysis)Harmonic Performance/Stability Study
    • Transient Ride Through and Dynamic Performance Studies (DPS) and other Design Studies using the Offline Simulation Tools
    • Overall System Performance Assessment Study
    • Low Voltage Ride Through (LVRT) and High Voltage Ride Through (HVRT) Study
    • Arc Flash Study
    • Cable Selection and Sizing
  • Integration of dedicated studies for systems utilizing combined AC power sources; AC power sources include conventional generations, AC-BESS, turbines, and renewables.
  • Expertise in frequency and time-domain simulation tools, like PSCAD, PSS/E, ETAP, DigSilent PowerFactory, to perform system studies as detailed above or under desired characteristics section.
  • Excellent technical communication skills.

Required Qualifications:

  • Bachelor’s degree in electrical engineering including power systems and power electronics subjects with proven professional experience and technical expertise in the field of power system engineering and preferably in AC substations and power plant System Studies.
  • Minimum 2-3 years’ experience of network or transient studies for conventional electric-energy generation / FACTS / renewable energy / inverter-based power systems in offshore wind, industrial, utility substations and grid interconnects.

Eligibility Requirements:

  • Ability and willingness to travel up to 10%, including internationally, and comply with GE Vernova travel guidelines

Desired Characteristics:

  • Professional engineering license and willing to review and seal your work and the work of others under your supervision.
  • Master’s degree in electrical engineering including power systems and power electronics subjects with proven professional experience and technical expertise in the field of power system engineering.
  • Knowledge of the North American Electric Reliability Corporation (NERC) and Federal Energy Regulatory Commission (FERC) compliance requirements and/or ISOs' interconnection or transmission planning guidelines.
  • Working knowledge on medium high voltage substation North American standards & guidelines (IEEE & ANSI standards and codes such as the NEC and the NESC.), local grid codes and related equipment (safety, application, sizing, and integration). Moreover, ability to engineer design packages when no clear customer specification is provided.
  • Working knowledge of applicable design calculations for primary & secondary equipment such as battery sizing & DC system component selection, power transformer and circuit breaker selection, circuit protection, control and power cable selection and rating, bus, fittings, insulator, and arrector selection, ground grid design, and lightning protection.

For Canada:

GE will only employ those who are legally authorized to work in Canada for this opening.

This position requires access to and/or use of information subject to U.S. Export Control Laws, which mandate all citizenships (including dual citizenships) be from the U.S. Department of Energy’s List of Generally Authorized Countries (10 CFR Part 810 Appendix A, which includes Canada and can be found here: https://www.ecfr.gov/current/title-10/chapter-III/part-810/appendix-Appendix%20A%20to%20Part%20810) unless a specific authorization from the U.S. Department of Energy is obtained or unless you are a U.S. citizen, U.S. national, U.S. permanent resident, or protected individual under the U.S. Immigration and Naturalization Act (8 U.S.C. 1324b(a)(3)). More information can be found here: https://www.energy.gov/nnsa/10-cfr-part-810.

You must have legal authorization to work in Canada and any offer of employment is conditioned upon the successful completion of a background investigation. The drug screen requirement in the background check process is not required if the role is based in Canada.


For candidates applying to a Canadian-based position, the pay range for this position is between $75,900 and $126,500 CAD. The specific pay offered may be influenced by a variety of factors, including the candidate’s experience, education, and skill set.


Bonus eligibility: Discretionary annual bonus


This posting is for an existing vacancy.


Strong consideration will be given to Indigenous persons. The term Indigenous refers to individuals who identify as being descended from the original inhabitants (the first peoples) of what is now known as Canada. In this context, Indigenous people are First Nations, Métis and/or Inuit

Additional Information

GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable).

Relocation Assistance Provided: No

#LI-Remote - This is a remote positionApplication Deadline: November 13, 2026For candidates applying to a U.S. based position, the pay range for this position is between $80,000.00 and $120,000.00. The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. The specific pay offered may be influenced by a variety of factors, including the candidate’s experience, education, and skill set.Bonus eligibility: discretionary annual bonus.This posting is expected to remain open for at least seven days after it was posted on October 30, 2026.Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance, 12 paid holidays, and permissive time off.GE Vernova Inc. or its affiliates (collectively or individually, “GE Vernova”) sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.

Emplois semblables

  • Electrical Engineer - Building

    Edmonton, AB

    BPA

    Candidates need experience designing building electrical systems and working in Revit, AutoCAD or other BIM software. They must solve complex problems with little direction and communicate well with clients and project teams.

    Revit, AutoCAD, BIM collaboration software

  • Senior Electrical Engineer

    Calgary, AB +1
    Sur placeTemps plein

    Worley: Worley is a global professional services company of energy, chemicals and resources experts headquartered in Australia.

    10+ ansCandidates need 10+ years of power system analysis experience, mostly on industrial facility projects, and a BS in Electrical Engineering. Strong software skills in power system tools and registration with APEGA as a P.Eng. (or the ability to get it at hire) are required.

    ETAP, SKM, PSCAD, EMTP-RV, CDEGS, ASPEN

    Senior Electrical Engineer

    Calgary, AB +1
    Temps plein

    Worley: Worley is a global professional services company of energy, chemicals and resources experts headquartered in Australia.

    10+ ansCandidates need 10+ years of power system analysis experience, mostly on industrial facility projects, and a BS in Electrical Engineering. Strong software skills in power system tools and registration with APEGA as a P.Eng. (or the ability to get it at hire) are required.

    ETAP, SKM, PSCAD, EMTP-RV, CDEGS, ASPEN

  • Intermediate Electrical Engineer

    Edmonton, AB

    SUNBELT SOLOMON SERVICES, LLC

    5+ ansCandidates need at least 5 years of experience, a bachelor's degree in electrical engineering, and 3 years with ETAP, SKM, EasyPower, EMTP or CDEGS. They must work independently on power system design and studies, lead teams, and travel within Alberta.

    ETAP, SKM, EasyPower, EMTP, CDEGS, EnerVista Launchpad

    Senior Electrical Engineer

    Edmonton, AB

    SUNBELT SOLOMON SERVICES, LLC

    10+ ansCandidates need a Professional Engineering or Professional Technologist degree and APEGA registration in Alberta, or the ability to register immediately. They also need at least 10 years of power system design and studies experience, the ability to work independently, a valid driver's licence and willingness to travel within North America.

    ETAP, SKM, EasyPower, EMTP

  • Senior Electrical Engineer

    Edmonton, AB +1

    BBA

    Candidates need senior experience in high voltage electrical engineering, especially substation design, and knowledge of the wind, solar and energy storage industry. Strong client relationship and proposal skills are also expected.

    Electrical engineering, Think creatively

  • Senior Electrical Engineer (Science & Technology)

    Calgary, AB
    100k–140k $/anTélétravailTemps plein

    HH Angus New

    10+ ansCandidates need a Bachelor's degree in Electrical Engineering or equivalent, 10+ years of consulting experience delivering complex projects, and a P.Eng with PEO. HH Angus also values experience with mission critical facilities, proficiency in AutoCAD and Revit, and strong attention to detail.

    AutoCAD, Revit

  • Electrical Engineer

    Calgary, AB
    80k–110k $/anHybrideTemps plein

    AECOM: AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025.

    4+ ansCandidates need a bachelor's degree in electrical engineering, four years of relevant experience and a P.Eng. in good standing. AECOM prefers experience with power systems, renewable energy, and tools like AutoCAD, Revit, ETAP or SKM.

    AutoCAD, Revit, ETAP, SKM

Lieux et modes de travail

Lieux

Tout le CanadaTélétravail · Hybride · Sur place · Sur le terrain

Astuce : ajoutez le télétravail pour élargir la recherche.

Exclure des lieux

Mode de travail

Offres de cette entreprise dans les résultats

Voici les offres de cette entreprise chargées dans votre recherche. Elle peut avoir d’autres postes ouverts.