Publié il y a 5 jours
Hardware Design Engineer (Analog/PCB)
@ G2V Optics
Edmonton, Alberta
En bref
G2V Optics is hiring a full-time Hardware Design Engineer (Analog/PCB) in Edmonton to own the analog electronics in its core LED light-source products, from SPICE simulation through schematic and manufacturable PCB layout. The work includes designing a new LED control board and layout, prototyping and testing, and working with contract manufacturers on DFM issues. The posting requires a bachelor's degree in engineering or physical science, 3 years of product development experience, and APEGA registration (EIT or P.Eng) or active progress toward it; up to 10% international travel is required.
Responsabilités :
- Design analog circuits and validate them with SPICE simulation
- Capture schematics and lay out manufacturable PCBs
- Prepare release packages and resolve DFM issues with contract manufacturers
- Bring up, debug and test prototypes on the bench
- Own estimates, technical risks and requirements in the gate process
Résumé des exigences :
- Bachelor's degree in engineering or physical science
- 3 years in product development from concept to volume production
- APEGA registration (EIT or P.Eng) or actively working toward it
- Strong analog circuit fundamentals and IPC standards knowledge
- Proficiency with SPICE tools and PCB design (KiCad preferred)
Outils et compétences
Avantages mentionnés
Source et dates
Site carrière / système de candidatures · bamboohr
- Date publiée par l’employeur
- 2026-11-11
- Première détection par notre source
- 2026-11-12
- Mise à jour du dossier source
- 2026-11-16
Ces dates décrivent le dossier source, pas une vérification en direct du recrutement. Consultez l’offre originale.
Détails du poste
| Niveau | Intermédiaire |
| Domaine | Génie |
| Expérience | 3 an(s) et plus |
| Heures par semaine | 40 (estimé) |
| Déplacements | avion : minimes · route : aucun |
| Milieu de travail | Bureau, Laboratoire |
| Position | Surtout assis |
| Exigences physiques | physique faible · ordinateur élevé |
| Langues | English |
| Permis et certifications | APEGA EIT, APEGA P.Eng |
| Formation | Baccalauréat (exigé) |
| Domaines d’études | Engineering, Physical Science |
| Avantages mentionnés | Congés payés généreux, Horaire flexible, Mieux-être |
Résumé et détails rédigés par l’IA à partir de l’offre; l’offre de l’employeur fait foi.
G2V Optics
Profil d’entreprise sauvegardé
Renseignements historiques provenant d’un profil The Jobs API sauvegardé (champs LinkedIn/Crunchbase). Ils ne sont pas vérifiés en temps réel; les chiffres peuvent avoir changé. Les valeurs manquantes restent inconnues.
Engineer the Sun.
Description complète de l’entreprise
G2V Optics is a global leader in smart, precision lighting and is committed to creating enabling technologies to power the world of tomorrow. G2V currently provides technology solutions to world-leading researchers, Fortune 500 technology firms, and aerospace companies in over 40 countries. G2V sells several solar simulation product lines globally and enables our customers to develop solutions for a more sustainable built world. Our customers use G2V's photons to drive the most critical developments in solar renewable energy, reliable advanced materials, and space exploration of this decade and beyond. Across the value chain of each of these sectors, highly reliable lighting is needed to develop, manufacture, process, and test the devices and outputs in each case. Our software-controlled Engineered Sunlight™ technology acts as a foundation to replicate geography-, season-, and altitude-specific natural lighting environments, as well as create light that matches the spectrum, uniformity, and stability requirements of scientific standards. We're proud to say that one of our key projects includes providing solar simulation light arrays to NASA's Goddard Space Flight Center for testing the OSAM-1 spacecraft.
- Abonnés LinkedIn
- 2 131
- Personnes associées sur LinkedIn
- 28
- Bureaux déclarés
- 9703 45 Ave, Edmonton, Alberta T6E 5V8, CA
- Catégories d’activité
- Electronics
- GreenTech
- Lighting
- Manufacturing
- Renewable Energy
- Sustainability
- Autres noms enregistrés
- G2V Optics
- G2V Optics Inc.
- Le profil indique une agence de recrutement
- Non
- Investissement total déclaré
- 2 411 298
La devise et la date d’observation ne sont pas fournies; ce n’est ni une valorisation actuelle ni une ronde de financement.
G2V Optics is a global leader in smart, precision lighting and is committed to creating enabling technologies to power the world of tomorrow. G2V currently provides technology solutions to world-leading researchers, Fortune 500 technology firms, and aerospace companies in over 40 countries. G2V sells several solar simulation product lines globally and enables our customers to develop solutions for a more…
| Champ | Valeur |
|---|---|
| Secteur | Appliances, Electrical, and Electronics Manufacturing |
| Taille | 11-50 employees |
| Siège social | Edmonton, Alberta |
| Type d’organisation | Privately Held |
| Fondée en | 2015 |
| Offres sur Jobsy | 1 |
| Voir la page |
Job Description – Hardware Design Engineer (Analog/PCB
Nov 2026
Level II Engineer
About G2V Optics
G2V Optics is a global leader in advanced lighting technologies. Founded in 2015 based on technology invented at the U of A, the company now provides solutions to world-leading organizations (e.g. NASA, Meta, Tesla, NREL). They use our light to power the most critical developments in solar renewable energy, advanced materials, and space exploration.
We are an agile team that functions on a startup-style culture based on quick learning, honesty and personal development, flexibility, and balance. If you want to be part of a team that’s making a global impact from right here in Edmonton, join us.
Summary
The Analog Electronics Engineer reports to the Product Development Manager and owns the analog electronics in G2V’s core products, from SPICE simulation to schematic to manufacturable PCB. You’ll design the electronics that drive our light sources, working where electronics meets optics, thermal, and mechanical design.
In your first few months, you’ll design and iterate on the control board for a new LED product and lay out a new LED board, from schematic through bring-up and test. Over time, you’ll grow into ownership of analog design across our product line, including architecture on new designs and updates to legacy products.
The work is grounded in analog fundamentals: simulating before you build, backing designs with sound circuit calculations, and producing manufacturable layouts that survive the optical, thermal, mechanical, and power realities of the product. You’ll work closely with our electronics lead, optics team, and firmware team, and with contract manufacturers to resolve DFM issues.
This role works within G2V’s Core Engineering function, which focuses on engineering the core components that build our products. This work emphasizes components that will be integrated into externally shipped customer products. Core Engineering encompasses a wide variety of engineering disciplines at G2V including electronics, firmware, thermal, software, and optics.
Stewardship of G2V Core Values
Every member of the G2V team is expected to embody these core values as the lived standard of how we work, communicate, and make decisions every day.
- Do the Right Thing — This is who we are when no one is watching. We do right by people and the planet. We make hard calls, tell uncomfortable truths, own mistakes, and hold each other accountable. Letting something slide is its own kind of dishonesty. G2V exists to build a better future. We leave things better than we found them.
- Sharpen the Team — This is the environment we build. We add energy instead of draining it. We assume good intent. We make it safe to be honest, take risks, and admit mistakes. We offer and receive tough feedback because the team matters more than our egos. Our confidence doesn’t depend on being right. We listen to understand, not to rebut. We get mad at problems, not people. We hold the door open for others to grow. We invest in the team we want to be a part of.
- Make it Happen — This is our engine. We don’t wait to be told what matters. We keep going when others might stop. We treat “I don’t know” as a starting point, not a destination. We act before we're certain. We learn from small, quick bets. We take ownership of outcomes. We value impact more than effort.
- Close the Loop — Everything else leads here. Integrity, team, drive — together they build something that matters. We close the loop. We seek feedback from each other and our customers. We learn equally from our successes, our failures, and our surprises. We don't solve the same problem twice. Our learning compounds, improving us as individuals, as a team, and as a company.
Primary Responsibilities
- Analog Design & Simulation: Translate requirements into analog circuit designs, validating them with SPICE simulation and sound circuit calculations before building. Define architecture and interfaces on new designs, and update design files on legacy products.
- Schematic & PCB Layout: Capture schematics and lay out manufacturable PCBs, producing complete design files (BOM, schematics, layout) at each iteration.
- Manufacturing & Vendors: Prepare release packages for contract manufacturers and resolve DFM issues. Apply the same disciplined handoff to internal teams.
- Prototyping & Testing: Bring up and debug prototypes on the bench. Write test plans with pass/fail criteria tied to requirements, and run design reviews to catch issues early.
- Planning & Gate Process: Own your estimates, technical risks, and requirements documentation within G2V’s gate process. Bring the project manager alternate paths in cost, time, and risk.
- Continuous Learning: Build new skills and tools, including AI-assisted engineering. Use git-based version control, and mentor less experienced team members.
Target Skills & Qualifications
The successful candidate will have:
- A Bachelor’s degree in Engineering, Physical Science, or an equivalent combination of education and experience
- 3 years of experience in a product development environment taking electronics designs from concept to volume production
- APEGA registration (EIT or P.Eng), or eligible and actively working toward registration
- Analog circuit fundamentals: strong applied skills in circuit calculations, practical “rule of thumb” judgement, and relevant industry standards
- Simulation-driven design: proficiency with SPICE tools (LTspice, PSpice, TINA-TI) for design validation
- EDA/PCB design: schematic capture and PCB layout experience (KiCad preferred; Altium or others acceptable)
- Design for Manufacturing (DFM): working knowledge of PCB fabrication and assembly constraints, with experience resolving DFM issues with contract manufacturers
- IPC standards: working knowledge of IPC design and workmanship standards (e.g. IPC-2221)
- Rapid prototyping and bench skills: fast iteration from simulation to prototype to test, using bench equipment for bring-up and debugging
- Python scripting for hardware test automation and calibration
- Version control: git workflows, pull requests, and releases
- Clear written and verbal communication for design reviews, test documentation, and working with project managers, vendors, and customers
Assets (Nice to Have)
- Embedded C on ARM microcontrollers: able to read, modify, and debug firmware for mixed-signal peripherals (I2C, SPI, ADCs, PWM)
- Deep experience in a specific analog field, such as power electronics, LED drivers, sensors, or mixed-signal design
- EMI/EMC mitigation and thermal management experience
- Exposure to regulatory certification (UL, CE)
- Component supply-chain awareness and second-sourcing
- Experience managing vendors or outsourced engineering work
- Cross-disciplinary literacy beyond electronics, such as optics or mechanical design
Mandatory Employment Requirements
- International travel to customer sites as required, up to 10% of the role.
Why G2V?
- Opportunity to join an innovative and energetic team of professionals who are passionate about green energy and sustainability
- Competitive compensation package, including medical and dental benefits, Health and Lifestyle Spendings Account and Paid Time Off.
- G2V observes all holidays and “optional” holidays (i.e.: Family Day, August Long Weekend, National Day for Truth and Reconciliation).
- Flexible working hours when possible, including time off for medical and dental appointments
- Planned social and wellness team building events
G2V is an equal opportunity employer and is committed to providing an inclusive and diverse workplace that values and respects every individual. Our hiring decisions are made without discrimination on the basis of mental disability, physical disability, gender, gender identity, gender expression, sexual orientation, race, color, ancestry, place of origin, religious beliefs, age, marital status, family status, or source of income. We strive to create an environment that encourages the contributions of all qualified applicants. All candidates will be considered fairly and equally, and we welcome applications from individuals of every background.
G2V Optics Inc. thanks all candidates for their interest and regrets that due to application volumes only those individuals selected for interview will be contacted.
Journal
Visible seulement par vous. Conservé sur cet appareil, et dans votre compte une fois connecté.