Postuler

Publié hier

Maintenance Technician I - UniFirst Canada

@ UniFirst Corporation

London, Ontario

Temps plein1+ ans d’expérience
Postuler
SIGNAUX

En bref

UniFirst Canada is hiring a Maintenance Tech I to repair, maintain, install and troubleshoot industrial equipment, including large washers, dryers, pneumatic and steam systems, conveyors and boilers. The role is full-time, Monday to Friday, with on-the-job training and hourly pay plus benefits. Experience and a 5th Class Power Engineer certificate are required.

Responsabilités :

  • Repair, maintain and troubleshoot industrial equipment and systems
  • Perform boiler safety checks and chemical testing
  • Perform Lockout/Tagout and confined space procedures
  • Record meter readings and maintenance results in computer systems
  • Respond to emergency and non-emergency repair calls

Résumé des exigences :

  • 5th Class Power Engineer minimum
  • Minimum 6 months industrial equipment repair experience
  • Lockout/Tagout experience required
  • Ability to read blueprints and schematics
  • Valid non-commercial driver's licence and safe driving record

Outils et compétences

Source et dates

Site carrière / système de candidatures · taleo

Date publiée par l’employeur
2026-11-15
Première détection par notre source
2026-11-16
Mise à jour du dossier source
2026-11-16

Ces dates décrivent le dossier source, pas une vérification en direct du recrutement. Consultez l’offre originale.

Détails du poste

NiveauDébutant
DomaineEntretien et réparation
Expérience1 an(s) et plus
Heures par semaine40
Horairejour, heures supplémentaires
Déplacementsavion : aucun · route : aucun
Milieu de travailUsine, Entrepôt
PositionAssis et debout
Exigences physiquesphysique élevé · soulever 80 lb · ordinateur faible
LanguesEnglish
Permis et certifications5th Class Power Engineer
Permis de conduireexigé
FormationSecondaire (DES) (exigé), Collégial (DEC) (préféré)
Avantages mentionnésCongés payés généreux, Régime de retraite, Aide aux études, Prime de rendement, Rabais employé, Mieux-être, Formation payée

Résumé et détails rédigés par l’IA à partir de l’offre; l’offre de l’employeur fait foi.

UniFirst Corporation

Profil d’entreprise sauvegardé

Renseignements historiques provenant d’un profil The Jobs API sauvegardé (champs LinkedIn/Crunchbase). Ils ne sont pas vérifiés en temps réel; les chiffres peuvent avoir changé. Les valeurs manquantes restent inconnues.

Uniforms - Services - Solutions

Description complète de l’entreprise

Headquartered in Wilmington, Mass., UniFirst Corporation (NYSE: UNF) is a North American leader in the supply and servicing of uniform and workwear programs, facility service products, as well as first aid and safety supplies and services. Together with its subsidiaries, the Company also manages specialized garment programs for the cleanroom and nuclear industries. In addition to partnering with leading brands, UniFirst manufactures its own branded workwear, protective clothing, and floorcare products at its five company-owned ISO-9001-certified manufacturing facilities. With more than 270 service locations, over 300,000 customer locations, and 16,000-plus employee Team Partners, the Company outfits more than 2 million workers every day. For additional information, contact UniFirst at 888.296.2740 or visit UniFirst.com. UniFirst’s mission is “To serve the people who do the hard work. Helping them succeed and deliver for what gives their lives meaning.” Our continuous customer focus enables us to grow, to provide an equitable return on investment, and to create development opportunities for our Team Partners.

Abonnés LinkedIn
67 343
Personnes associées sur LinkedIn
7 390
Bureaux déclarés
  • 68 Jonspin Road, Wilmington, MA 01887, US
Catégories d’activité
  • Training
  • Facilities Support Services
  • Textiles
  • First Aid
  • Retail
  • Rental
  • B2B
  • Laundry and Dry-cleaning
Autres noms enregistrés
  • UniFirst
  • UniFirst Corporation
Spécialités
  • Uniforms
  • Uniform Rent
  • Lease
  • Buy Programs
  • Facility Services
  • Healthcare Apparel & Facility Services
  • Corporate Casual Attire
  • Standard Workwear
  • Protective Clothing
  • Industry Specific Programs
  • and Workwear
Le profil indique une agence de recrutement
Non
Investissement total déclaré
0

La devise et la date d’observation ne sont pas fournies; ce n’est ni une valorisation actuelle ni une ronde de financement.

Headquartered in Wilmington, Mass., UniFirst Corporation (NYSE: UNF) is a North American leader in the supply and servicing of uniform and workwear programs, facility service products, as well as first aid and safety supplies and services. Together with its subsidiaries, the Company also manages specialized garment programs for the cleanroom and nuclear industries. In addition to partnering with leading brands…

ChampValeur
SecteurTextile Manufacturing
Taille10,001+ employees
Siège socialWilmington, MA
Type d’organisationPublic Company
Fondée en1936
SpécialitésUniformsUniform RentLeaseBuy ProgramsFacility ServicesHealthcare Apparel & Facility ServicesCorporate Casual AttireStandard WorkwearProtective ClothingIndustry Specific Programs
Offres sur Jobsy73
LinkedInVoir la page
Description

Our Team is Kind of a Big Deal!

UniFirst Canada is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst team. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components, both indoor and outdoor facility and equipment, including but not limited to: large capacity washers, dryers, pneumatic and steam systems, convey system and boilers. At UniFirst we have a standard Monday - Friday work week. We have an immediate opening and provide on the job training.

What’s in it for you?

Training:
Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement.

Career Growth:
You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.

Culture:
Our family culture is what makes UniFirst Canada an organization that stands out from the rest.

Diversity:
At UniFirst Canada, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful.

Pay & Benefits:
On the job training & great hourly pay + RRSP, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses.

What you’ll be doing:

· Utilize hand/power tools such as hammers, hoists, saws, drills, and wrenches, precision measurement tools, and electronic testing devices.

· Ensure safe operation of machinery, mechanical electrical, pneumatic, and hydraulic systems and components.

· Follow blueprints, schematics, operation manuals, manufacturer’s instructions, and engineering specifications.

· Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments.

· Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required

· Perform daily and weekly safety checks on boilers and make necessary repairs as required.

· Perform Lockout/Tagout and Confined Space procedures where appropriate.

· Record and analyze meter readings of utilities in long and take corrective actions when necessary.

· Perform daily and weekly location/system safety checks and follow up to address concerns.

· Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures.

· Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual.

· Utilize a Computerized Maintenance Management System for all repair and preventive maintenance activities.

· Respond to emergency alarms and assist with other maintenance personnel with emergency and non-emergency repairs.

· Perform other duties as assigned by location management.

What we’re looking for:

  • High school and/or GED is required.
  • Two-year technical degree in an appropriate background is preferred.
  • Must be at least 18 years of age.
  • Minimum of 5th Class Power Engineer
  • Must pass UniFirst’s maintenance knowledge assessment to be eligible for employment.
  • Valid non-commercial driver’s license and a safe driving record are required.
  • Knowledgeable in maintenance equipment.
  • A minimum of 6 months’ work experience repairing industrial processing equipment in a production environment is required. Applicable military experience will be considered.
  • Ability to read blueprints and schematics is required.
  • Ability to read and understand maintenance literature printed in English is required.
  • Basic computer and Microsoft Office skills are required.
  • Lockout / Tagout experience is required.
  • Prior welding experience including MIG, TIG, ARC, cutting, and brazing is preferred.
  • Experience with formalized safety programs is preferred.
  • Prior experience using a Computerized Maintenance Management System (CMMS) is preferred.
  • HVAC experience and boiler knowledge preferred.
  • Ability to lift up to 80 lbs.
  • Ability to work overtime as needed is required.

Disclaimer Statement: This job description is not intended, nor should it be construed to be an exhaustive list of all responsibilities, duties, skills, or working conditions associated with a job. It is intended to be only a general description of principal requirements common to positions of this type.

About UniFirst

The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 2 billion-dollar organization.

UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team.

UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

Emplois semblables

  • Maintenance Technician

    Vaughan, ON
    Temps plein

    The Forest Group

    Candidates need experience maintaining light and heavy vehicles, knowledge of automotive electronics, and skill with diagnostic tools. They must hold an Ontario Vehicle Operator's Permit Class G, have Grade 12 or equivalent, and strongly preferably an Ontario Motor Vehicle License 310T.

    Scanners, Digital meters, Tire balancers, Brake lathes, AC filling and testing equipment, Hand tools

  • Maintenance Technician - Millwright

    Mississauga, ON
    38–45 $/hSur place

    Ontario Impex of Canada

    5+ ansCandidates need a Red Seal millwright (433A) certification or a recognized community college program, five years of hands-on experience, and electrical experience as an asset. Strong troubleshooting, communication and multi-tasking skills are required.

    Welding equipment, Plasma cutter, Packaging equipment, Metal detector, Weighing equipment, Label printer

  • Maintenance Technician

    Amherstburg, ON
    25–32 $/hTemps plein

    Belwood Poultry LTD

    3+ ansCandidates need millwright or maintenance experience, with three years preferred, plus Grade 12 or equivalent. A technical diploma or ticket is preferred, a valid Ontario class G driver's licence is required, and willingness to obtain a Waste Water OIT Certificate is needed. Welding experience is an asset.

    blueprints, drawings, welding equipment, ladders

  • Maintenance Technician

    Bolton, ON
    Temps plein

    Husky Technologies

    5+ ansCandidates need 5 to 10 years of experience maintaining CNC equipment in manufacturing, hands-on experience with controls such as Fanuc, Siemens or Okuma, and a high school diploma. A technical certification or related engineering technology diploma is preferred.

    Fanuc, Siemens, Okuma, laser alignment system, dial indicator, PLC

  • Maintenance Technician I

    Greater Sudbury, ON
    Temps plein

    City of Greater Sudbury

    1+ ansCandidates need Grade XII, one to two and a half years of related experience, and working knowledge of janitorial, minor repair and grounds maintenance methods. They also need health and safety knowledge, a valid driver's licence, the ability to work with minimal supervision, and a vulnerable sector check.

    hand tools, vehicle

    Maintenance Technician II (Funded Position)

    Greater Sudbury, ON
    Stage

    City of Greater Sudbury

    5+ ansCandidates need a completed secondary school (grade XII) education and five to seven years of related maintenance experience. They must show a broad range of repair skills, tool proficiency, a valid driver's licence with an acceptable driving record, and the ability to work independently and communicate well with tenants and staff.

    repair van, shop vac

  • Maintenance Technician

    Ingersoll, ON
    Temps plein

    Coilplus, Inc.

    3+ ansCandidates need Red Seal Industrial Electrician and/or Industrial Mechanic certification, 3-5 years of industrial maintenance experience in manufacturing, and strong troubleshooting skills. Experience with PLC-controlled equipment and metals processing is an asset.

    PLC, maintenance software, diagnostic instruments, testing equipment, hand tools, power tools

  • MAINTENANCE TECHNICIAN L2

    Kingsville, ON
    25–28 $/hTemps plein

    Mucci Farms Inc

    3+ ansMucci Farms needs candidates with at least 3 years of related maintenance experience, high school completion, and prior experience with preventive maintenance software and varied machinery. A safety-first mindset, clear English communication and the ability to work independently are required. A technical diploma or apprenticeship and Spanish are assets.

    Preventive maintenance software, Hand tools, Power tools, Forklift, Scissor lift, Skyjack

Lieux et modes de travail

Lieux

Tout le CanadaTélétravail · Hybride · Sur place · Sur le terrain

Astuce : ajoutez le télétravail pour élargir la recherche.

Exclure des lieux

Mode de travail

Offres de cette entreprise dans les résultats

Voici les offres de cette entreprise chargées dans votre recherche. Elle peut avoir d’autres postes ouverts.