Connexion Inscription gratuite
Postuler

Publié il y a 11 jours

Manual Lathe Machinist

@ MAS Precision Parts

Toutes ses offres

Woodbridge, Ontario

Temps plein3+ ans d’expérience
Postuler
SIGNAUX

En bref

MAS Precision Parts is hiring a full-time manual lathe machinist in Woodbridge, Ontario, to plan, set up and machine one-off repair parts, tooling components and prototypes on manual engine lathes. The role requires 3+ years of manual lathe experience, the ability to read drawings and sketches, and precision measurement with micrometers and gauges.

Responsabilités :

  • Set up and operate manual engine lathes
  • Plan machining sequence, workholding and tooling from drawings or sketches
  • Turn, face, bore, groove and thread to drawing tolerances
  • Inspect parts against drawings with measuring tools
  • Support CNC and fabrication jobs with secondary operations

Résumé des exigences :

  • 3+ years setting up and operating manual lathes
  • Ability to read technical drawings and blueprints
  • Precision measurement with micrometers, calipers, indicators and gauges
  • Knowledge of cutting tools and machining steel, stainless steel and aluminum
  • Strong mechanical aptitude

Outils et compétences

Manual engine latheMicrometersCalipersGauges3- and 4-jaw chucksCollets
Source et dates

Type de source non vérifié · jsonld

Date publiée par l’employeur
2026-10-30
Première détection par notre source
2026-11-10
Mise à jour du dossier source
2026-11-10

Ces dates décrivent le dossier source, pas une vérification en direct du recrutement. Consultez l’offre originale.

Détails du poste

NiveauIntermédiaire
DomaineFabrication et production
Expérience3 an(s) et plus
Heures par semaine40 (estimé)
Déplacementsavion : aucun · route : aucun
Milieu de travailUsine
PositionSurtout debout
Exigences physiquesphysique modéré · ordinateur faible

Résumé et détails rédigés par l’IA à partir de l’offre; l’offre de l’employeur fait foi.

Postuler

MAS Precision Parts

Toutes ses offres
ChampValeur
Offres sur Jobsy4
Description

We are looking for a manual lathe machinist. Much of our manual turning is one-off: shafts, bushings, sleeves, and pins for repairs, tooling and fixture components, prototypes, and modifications to existing parts, often from a sketch or a worn sample rather than a full drawing.

You will plan each job, set it up, and see it through to a good part, working alongside our CNC machinists and design team.

What you will do

Manual turning

  • Set up and operate manual engine lathes.
  • Plan the machining sequence, workholding, and tooling from drawings, sketches, or sample parts.
  • Hold work in 3- and 4-jaw chucks, collets, and between centres, and indicate it true.
  • Turn, face, bore, groove, and cut internal and external threads to drawing tolerances.
  • Machine repair parts, modifications, and tooling and fixture components.

Quality

  • Measure and inspect work with micrometers, calipers, indicators, and gauges.
  • Check diameters, concentricity, threads, and surface finish against the drawing before parts move on.

Shop support

  • Support CNC and fabrication jobs with secondary operations such as drilling, tapping, and deburring.
  • Perform routine machine maintenance and keep the work area clean and organized.

What you bring

  • 3+ years of experience setting up and operating manual lathes.
  • Ability to read and interpret technical drawings and blueprints.
  • Precision measurement skills using micrometers, calipers, indicators, and gauges.
  • Knowledge of cutting tools, materials, and machining techniques for steel, stainless steel, and aluminum.
  • Strong mechanical aptitude and the ability to work out a job from a sketch or sample part.

Nice to have

  • Surface grinding experience.
  • Tool and die, mould, or job-shop background.
  • Some CNC operating experience, or interest in learning CNC.
  • Russian or Ukrainian language skills.

About MAS Precision Parts

MAS Precision Parts has machined custom, tight-tolerance parts in Woodbridge, Ontario since 1989. We are a small job shop serving automotive, aerospace, food processing, and construction customers, with work that runs from one-off prototypes and repairs through tooling and short production runs. The floor covers CNC milling and turning, manual machining, Wire EDM, and surface and jig grinding, so the work is varied and you see parts through from drawing to delivery.

Emplois semblables

  • Manual Lathe machinist - Etobicoke ON

    Burlington, ON
    Temps plein

    GEA Canada Inc.

    3+ ansGEA Canada needs candidates with 3 to 5 years of manual machining experience, especially on lathes, plus training in metrology. Strong measurement skills, the ability to read technical drawings, and attention to detail are essential.

    Manual lathe, Manual milling machine, Drill press, Horizontal grinding machine, Micrometers, Bore gauges

    Manual Lathe Machinist - Etobicoke ON

    Burlington, ON
    Temps plein

    GEA Canada Inc.

    3+ ansCandidates need 3 to 5 years of hands-on manual machining experience, strong lathe skills and training in metrology. GEA Canada Inc. also expects the ability to read technical drawings and work carefully to micrometer-level tolerances.

    manual lathe, manual milling machine, drill press, horizontal grinding machine, micrometer, bore gauge

  • Senior General Accountant (Mandarin Speaking)

    Woodbridge, ON
    Temps plein

    Sailun Tire Americas

    4+ ansSailun Tire Americas needs candidates with an accounting or finance degree, a CPA, CGA or CA designation or near completion, and 4+ years of similar experience. Strong knowledge of ASPE and IFRS, advanced Excel, and strong written and verbal communication are required.

    SAP, Microsoft Dynamics Navision, Power BI, Microsoft Excel

    Junior General Accountant

    Woodbridge, ON
    Temps plein

    Sailun Tire Americas

    2+ ansCandidates need an undergraduate degree in accounting or finance and a CPA, CGA or CA designation or near completion, plus 2 or more years of progressive accounting experience. Advanced Excel and ERP experience (SAP, Microsoft Dynamics/Navision, Power BI) is expected.

    Microsoft Excel, SAP, Microsoft Dynamics (Navision), Power BI

  • Plant Manager

    Woodbridge, ON
    Temps plein

    MST Rebar Inc.

    5+ ansCandidates need 5 to 7 years of progressive manufacturing or industrial operations experience, including multi-department or facility management and leading production teams. Post-secondary education in engineering or operations is preferred, along with strong leadership, Lean and cost-management skills.

    Microsoft Excel, ERP systems

  • Badminton Coach - Part-Time

    Woodbridge, ON
    Temps partiel

    Battledore Badminton

    Candidates need at least 6 months of badminton coaching experience and national or provincial competition experience. They must be fluent in English, pass a police vulnerable sector check, and work well with juniors and parents.

  • Account Executive

    Woodbridge, ON
    Temps plein

    All-Risks Insurance Brokers Limited

    Candidates need knowledge of property, casualty, life and health insurance and strong client-service and organizational skills. Ontario insurance licensing (such as RIBO) or eligibility to obtain it is required, and brokerage experience is an asset.

    CRM tools, Microsoft Office, insurance brokerage management system

  • Customer Service Representative

    Woodbridge, ON
    Temps plein

    Lorpon Labels Inc.

    3+ ansCandidates need three or more years of customer service, account coordination or order management experience, and labels, printing or packaging experience is strongly preferred. They must be detail-oriented, strong in written and verbal communication, comfortable with ERP systems, Outlook, Excel and Word, and able to handle multiple orders at once.

    ERP system, Microsoft Outlook, Microsoft Excel, Microsoft Word

Lieux et modes de travail

Lieux

Tout le CanadaTélétravail · Hybride · Sur place · Sur le terrain

Astuce : ajoutez le télétravail pour élargir la recherche.

Exclure des lieux

Mode de travail

Offres de cette entreprise dans les résultats

Voici les offres de cette entreprise chargées dans votre recherche. Elle peut avoir d’autres postes ouverts.