Postuler

Première détection par notre source: il y a 14 jours

Manufacturing Operator (Afternoons)

@ Summit Interconnect Intermediate, Inc.

Markham, Ontario

3+ ans d’expérience
Postuler
SIGNAUX

En bref

Summit Interconnect Intermediate, Inc. is hiring manufacturing operators for the afternoon shift (4:00pm to 12:30am) to run printed circuit board production equipment. The work involves loading machines, monitoring process conditions, inspecting parts, and recording production data. Training is provided and manufacturing experience is preferred but not required.

Responsabilités :

  • Load, unload and move materials between manufacturing steps
  • Set up and operate PCB manufacturing machines
  • Measure and inspect parts against requirements
  • Record production and inspection data accurately
  • Keep equipment and work areas clean using 5S

Résumé des exigences :

  • High school diploma or equivalent preferred
  • 3 to 5 years manufacturing experience preferred
  • PCB manufacturing experience a plus
  • Ability to follow written and verbal instructions
  • Attention to detail and commitment to quality

Outils et compétences

Source et dates

Type de source non vérifié · saashr

Date publiée par l’employeur
Non fourni
Première détection par notre source
2026-10-27
Mise à jour du dossier source
2026-10-27

Ces dates décrivent le dossier source, pas une vérification en direct du recrutement. Consultez l’offre originale.

Détails du poste

NiveauDébutant
DomaineFabrication et production
Horairesoir
Déplacementsavion : aucun · route : aucun
Milieu de travailUsine
PositionAssis et debout
Exigences physiquesphysique modéré · soulever 30 lb · ordinateur faible
LanguesEnglish
FormationSecondaire (DES) (préféré)

Résumé et détails rédigés par l’IA à partir de l’offre; l’offre de l’employeur fait foi.

Summit Interconnect Intermediate, Inc.

ChampValeur
Offres sur Jobsy4
Description

About the Role:

This is a hands-on manufacturing job for the Afternoon Shift (4:00pm-12:30am): operators follow work instructions, operate equipment safely, check product quality, record production information, and keep their work area clean and organized.

Manufacturing experience is preferred but not required. Training is provided for the equipment and processes used in each work area, and operators may be cross-trained to work in more than one area. Candidates coming from other hands-on industries, such as automotive, electronics, warehouse, or general assembly, are encouraged to apply.

Responsibilities:

  • Load and unload materials from manufacturing equipment.
  • Set up and operate machines used to make printed circuit boards.
  • Follow work instructions, process requirements, and production schedules.
  • Monitor equipment and process conditions during production.
  • Measure and inspect parts to make sure they meet requirements.
  • Accurately record production, inspection, and process information.
  • Handle chemicals and materials using required safety equipment.
  • Move product between manufacturing steps.
  • Keep equipment and work areas clean and organized using 5S standards.
  • Stop the process and ask for help when equipment, materials, or product do not look correct.
  • Work with other operators, technicians, engineers, and supervisors.
  • Follow all safety, quality, and environmental rules.

Experience & Skills:

  • High school diploma or equivalent preferred.
  • 3 to 5 years manufacturing experience is preferred but not required.
  • Previous PCB manufacturing experience is a plus.
  • Ability to follow written and verbal instructions.
  • Basic computer, math, and measurement skills.
  • Strong attention to detail and a commitment to quality.
  • Ability to work safely around manufacturing equipment and chemicals.
  • Ability to work as part of a team.
  • Willingness to learn new equipment and be cross-trained in different processes.

Physical Requirements:

  • Must be able to sit and/or stand for long period of time.
  • Must be able to lift up to 30 lbs. on a regular basis.

Emplois semblables

  • Manufacturing Operator L1

    Mississauga, ON
    Temps plein

    Bora Pharmaceuticals Services Inc

    Candidates need a high school diploma and 0-1 year of production experience, with working knowledge of production equipment. They need SAP or similar systems, strong problem-solving and communication skills, and the ability to lift up to 50 lbs and work rotating shifts.

    SAP, IMS, IP21, eBRS, CDISY, Freeweigh

    Manufacturing Operator L1

    Mississauga, ON
    Temps plein

    Bora Pharmaceuticals Services Inc

    Candidates need 0-1 year of production experience, working knowledge of production equipment, and experience with SAP, IMS or similar systems. High school diploma required; ability to lift up to 50 lbs and work rotating shifts.

    SAP, IMS, IP21, eBRS, CDISY, Freeweigh

  • Manufacturing Operator

    Markham, ON

    Summit Interconnect Intermediate, Inc.

    Candidates need a high school diploma or equivalent preferred and 3 to 5 years of manufacturing experience preferred but not required. They should follow written and verbal instructions, have basic computer, math and measurement skills, and show attention to detail and a commitment to quality.

    PCB manufacturing equipment

  • Manufacturing Operator - Second Shift

    Peterborough, ON
    Temps plein

    Woodward Canada Inc.

    Candidates need Grade 12 or equivalent and good communication skills. Electronics manufacturing experience and IPC-A-610 or J-STD-001 knowledge are assets, and they must be able to lift 60 lbs.

    SMT pick and place, AOI, Reflow oven, Selective solder, Board wash, ERP software

    Manufacturing Operator

    Peterborough, ON
    Temps plein

    Woodward Canada Inc.

    Woodward Canada Inc. needs candidates with Grade 12 or equivalent, skill reading engineering drawings and parts lists, attention to detail, and computer skills in MS Office and ERP software. Electronics manufacturing experience, IPC-A-610 and J-STD-001 knowledge, and precision equipment experience are assets, and the role requires lifting 60 lbs.

    SMT pick and place, AOI, reflow oven, selective solder, board wash, hand tools

  • Manufacturing Operator

    Burlington, ON
    23,64 $/hContrat

    JFE Shoji Power Canada Inc.: JFE Shoji Power Canada is an electrical steel products manufacturer located in Burlington, Ontario.

    Candidates need a high school diploma or equivalent, mechanical aptitude, and basic troubleshooting skills. Experience with precision measuring tools, attention to detail, and basic computer and math skills are also needed. Forklift or overhead crane certifications are an asset.

    calipers, micrometers, gauges, forklift, overhead crane

  • Manufacturing Operator

    Belleville, ON

    Kennametal, Inc.

    Candidates need to be physically fit, with a high school diploma or extensive manufacturing experience. They must be available for all shift rotations and enrol in the Canadian Controlled Goods Program.

    Manufacturing Operator

    Belleville, ON

    Kennametal, Inc.

    Candidates need a high school diploma or extensive manufacturing experience, physical fitness, and availability for all shifts including Saturdays. Enrolment in the Canadian Controlled Goods Program is required.

Lieux et modes de travail

Lieux

Tout le CanadaTélétravail · Hybride · Sur place · Sur le terrain

Astuce : ajoutez le télétravail pour élargir la recherche.

Exclure des lieux

Mode de travail

Offres de cette entreprise dans les résultats

Voici les offres de cette entreprise chargées dans votre recherche. Elle peut avoir d’autres postes ouverts.