Publié il y a 7 mois
Mechanical Engineer I
@ Merrick & Company
Kanata, Ontario
En bref
Merrick & Company is hiring a Mechanical Engineer I in its Kanata, ON office to support mechanical design on multi-disciplinary projects. The role covers detailed design, calculations, drawings and commissioning for life science and nuclear facilities, requires at least two years of related experience, and follows a hybrid office, remote and onsite arrangement.
Responsabilités :
- Detailed mechanical, plumbing and controls design of complex facilities
- Detailed engineering calculations and 3D construction drawings
- Site inspection, testing and commissioning of equipment
- Specifications and technical reports
- Apply codes and standards for nuclear and biocontainment facilities
Résumé des exigences :
- Minimum two years of related mechanical building design experience
- Proficiency in REVIT and AutoCAD
- Strong report writing and communication skills
- Canadian citizen or permanent resident with Reliability clearance
- Valid passport and ability to travel
Outils et compétences
Avantages mentionnés
Source et dates
Type de source non vérifié · jibe
- Date publiée par l’employeur
- 2026-04-16
- Première détection par notre source
- 2026-10-14
- Mise à jour du dossier source
- 2026-10-26
Ces dates décrivent le dossier source, pas une vérification en direct du recrutement. Consultez l’offre originale.
Détails du poste
| Niveau | Débutant |
| Domaine | Génie |
| Expérience | 2 an(s) et plus |
| Déplacements | avion : modérés · route : minimes |
| Milieu de travail | Bureau, Chez les clients, Chantier |
| Position | Assis et debout |
| Exigences physiques | physique faible · ordinateur élevé |
| Langues | English |
| Candidatures encouragées | Personnes handicapées |
| Cote de sécurité | Cote de fiabilité |
| Avantages mentionnés | Congés payés généreux, Prime de rendement, Formation payée |
Résumé et détails rédigés par l’IA à partir de l’offre; l’offre de l’employeur fait foi.
Merrick & Company
Profil d’entreprise sauvegardé
Renseignements historiques provenant d’un profil The Jobs API sauvegardé (champs LinkedIn/Crunchbase). Ils ne sont pas vérifiés en temps réel; les chiffres peuvent avoir changé. Les valeurs manquantes restent inconnues.
Solving. Growing. Living.
Description complète de l’entreprise
At Merrick, employee ownership drives us as we work alongside our clients to develop the right solutions to better our world. We’re motivated by a need to do the right thing and be the best we can be—and we make decisions based on that, not the bottom line. As employee owners, we’re empowered to find the solutions that have a positive impact on our communities, our company, and our world. We’re an employee-owned, multi-discipline professional engineering, architecture, surveying, geospatial, and science and technology solutions firm. We serve domestic and international clients in the aerospace; infrastructure; nuclear; energy, manufacturing, and bioprocessing; and life sciences markets.
- Abonnés LinkedIn
- 20 251
- Personnes associées sur LinkedIn
- 1 137
- Bureaux déclarés
- 8051 E Maplewood Ave, Suite 300, Greenwood Village, Colorado 80111, US
- 3453 Pierce Drive, Suite 120, Chamblee, GA 30341, US
- 1093 Commerce Park Dr., #200, Oak Ridge, TN 37830, US
- 2155 Louisiana Blvd. N.E., Suite 9500, Albuquerque, NM 87110, US
- 401 E Sonterra Blvd., Suite 250, San Antonio, TX 78258, US
- 1755 Telstar Drive, Suite 500, Colorado Springs, Colorado 80920, US
- 2480 W. 26th Ave., Unit B225, Denver, CO 80211, US
- 5250 Hahns Peak Dr., Suite 210, Loveland, Colorado 80538, US
- 600 Sixth Street, Suite103, Los Alamos, NM 87544, US
- 301 S McDowell St, Suite 300, Charlotte, North Carolina 28204, US
- 142 Coach Light Way, Aiken, South Carolina 29803, US
- 736 Market St., Suite 1510, Chattanooga, TN 37402, US
- 580 Prom. Terry Fox Drive, Suite 400, Kanata, Ontario K2L-4B9, CA
- 3201 C Street, Suite 105, Anchorage, AK 99503, US
- 8247 Devereux Dr, Suite 103, Melbourne, Florida 32940, US
- 110 S. Hartford Avenue, Suite 150, Tulsa, OK 74120, US
- 100 New Bridge Street, London, England EC4V 6JJ, GB
- 4845 University Square, Suite 9, Huntsville, AL 35816, US
- 1161 W. River St., Suite 130, Boise, ID 83702, US
- 504 W Main St., Lewiston, ID 83501, US
- 616 Third St., Suite 114, McCall, ID 83638, US
- 11870 Merchants Walk, Suite 202, Newport News, Virginia 23606, US
- 9011 Arboretum Pkwy, Suite 310, Richmond, Virginia 23236, US
- 6011 University Blvd, Suite 200, Ellicott City, Maryland 21043, US
- 409 E Coeur D Alene Ave, Suite C, Coeur d'Alene, Idaho 83814, US
- Catégories d’activité
- Information Technology
- Autres noms enregistrés
- Merrick & Company
- Spécialités
- Energy
- Infrastructure
- Life Sciences
- Geospatial Solutions
- National Security
- Department of Defense
- Nuclear
- Aerospace
- Water
- Whitewater
- Transportation
- Land Development
- Oil and Gas
- Power
- Industrial Biotechnology
- Process and Industrial
- Biosafety and Biosecurity
- Engineering
- Architecture
- Design Build
- Commissioning
- Surveying
- Consulting
- Government
- University
- and Private Industry
- Le profil indique une agence de recrutement
- Non
- Investissement total déclaré
- 0
La devise et la date d’observation ne sont pas fournies; ce n’est ni une valorisation actuelle ni une ronde de financement.
At Merrick, employee ownership drives us as we work alongside our clients to develop the right solutions to better our world. We’re motivated by a need to do the right thing and be the best we can be—and we make decisions based on that, not the bottom line. As employee owners, we’re empowered to find the solutions that have a positive impact on our communities, our company, and our world. We’re an employee-owned…
| Champ | Valeur |
|---|---|
| Secteur | Design Services |
| Taille | 1,001-5,000 employees |
| Siège social | Greenwood Village, Colorado |
| Type d’organisation | Privately Held |
| Fondée en | 1955 |
| Spécialités | EnergyInfrastructureLife SciencesGeospatial SolutionsNational SecurityDepartment of DefenseNuclearAerospaceWaterWhitewater |
| Offres sur Jobsy | 8 |
| Voir la page |
Merrick and Company is seeking Mechanical Engineer with a minimum of two (2) years related experience to support the mechanical design of projects as part of a multi-disciplinary team. This person will be located in our Kanata, ON office. Client projects for this position require Canadian Citizenship.
Merrick is an internationally known multi-office and multi-discipline firm consisting of a diverse, dedicated, and talented staff which has achieved design excellence throughout its 60+ years of existence. With offices worldwide, Merrick and Company has been ranked as one of the top 100 design firms by Engineering News Record. Merrick provides personalized services to various clients throughout the world.
WHAT YOU'LL DO
Candidates that have a desire for personal and professional growth, a well-defined understanding of design and construction document processes, and adaptability for short term and long-term projects in an environment that requires a blend of creativity and high technical skills. Successful candidates must be self-starting, motivated, innovative, articulate, self-disciplined, and confident in a demanding, exciting, and fast-paced environment. This position requires a competent mechanical engineer / designer who as a member of the mechanical design team will be responsible for all phases of mechanical design production for a variety of Life Sciences, Nuclear, and National Security projects ranging from programming through construction administration. Opportunities also exist for the participation in facility commissioning projects.
Job Description
- Participating as part of the mechanical design team and the multi-disciplinary project team, execute the detailed mechanical, plumbing/process and controls design of complex mechanical facilities including life science and nuclear facilities, inclusive of:
- Detailed engineering calculations
- Production of detailed 3D models and construction drawings
- Specifications
- Reports as required
- Perform site inspection, testing, and commissioning of equipment and facilities as required, which may include travel within Canada and abroad
- Utilize excellent verbal and written communication skills to interact effectively with clients and other employees
- Develop and maintain expert level knowledge of applicable codes and standards for the design and construction of nuclear and biocontainment facilities in Canada and internationally as required
- Develop and maintain expert level skills in required software packages including REVIT
- Execute all work in accordance with Merrick and project specific Quality Assurance procedures
- Exercise excellent independent judgement and initiative to complete design tasks
- Work independently and in a team environment based upon Merrick’s hybrid arrangement comprised of office, remote, and onsite work.
REQUIRED QUALIFICATIONS
- We are looking for a mechanical engineer / designer with experience in mechanical building design for government, academic, and private clients. Demonstrated experience in as many of the following areas as possible is an asset: HVAC, plumbing/process, fire protection and controls design
- A minimum of two (2) years related experience.
- Experience in aspects of mechanical building design including planning, calculations, equipment selection, schematic design, production of construction documents (drawings and specifications), and construction administration is a strong asset
- Laboratory design and construction knowledge is an advantage.
- Experience in energy modeling and life cycle cost analysis for sustainability design is an asset
- Candidate shall be proficient in the use of REVIT and AutoCAD.
- Candidate shall be proficient in report writing including basis of design reports, specifications, field reports, etc.
- Candidate shall have good verbal and writing skills and be able to interact effectively with clients and other employees and must have strong oral presentation skills.
- Candidate must be able to demonstrate effective problem-solving skills applying mechanical design principals
- Candidate must be able to travel and must possess a current passport. It is anticipated that this may include some international travel.
- Work at jobsites will be required inclusive of active construction and or commissioning efforts. Will require access to/from elevated areas, functional and operational equipment and donning of appropriate PPE
- Client requirements for this position require Canadian citizenship or permanent resident status qualified with minimum Reliability clearance level.
- Air travel and business trips will be required within Canada, continental USA and possible overseas work as well.
TOTAL REWARDS & EMPLOYEE PROGRAMS
- Comprehensive Compensation & Benefits – Merrick & Company offers a competitive compensation and benefits package including health insurance, dental and vision coverage, and paid time off (PTO).
- Robust Referral Program – Earn incentives for referring top talent to join our team.
- Performance Reviews – Annual reviews to recognize contributions and support career growth.
- Professional Development – Access to ongoing training and development opportunities to build your skills and advance your career.
- Employee Recognition – Formal programs to celebrate achievements and outstanding performance.
- Peer Mentor Program – Get support and guidance through structured mentorship opportunities.
- And More – Additional programs and benefits designed to support your success and well-being.
ADDITIONAL INFORMATION
- Apply online only. No e-mail, hard copy or third-party resumes accepted.
- At Merrick, every resume is carefully reviewed by our team of experienced human recruiters—never by AI. We are committed to a fully human-centered hiring process, ensuring each candidate receives thoughtful, personalized attention at every stage.
- Merrick is an Equal Opportunity Employer, including disability/vets.
#LI-Hybrid #LI-JN1
Candidates that have a desire for personal and professional growth, a well-defined understanding of design and construction document processes, and adaptability for short term and long-term projects in an environment that requires a blend of creativity and high technical skills. Successful candidates must be self-starting, motivated, innovative, articulate, self-disciplined, and confident in a demanding, exciting, and fast-paced environment. This position requires a competent mechanical engineer / designer who as a member of the mechanical design team will be responsible for all phases of mechanical design production for a variety of Life Sciences, Nuclear, and National Security projects ranging from programming through construction administration. Opportunities also exist for the participation in facility commissioning projects.
Job Description
- Participating as part of the mechanical design team and the multi-disciplinary project team, execute the detailed mechanical, plumbing/process and controls design of complex mechanical facilities including life science and nuclear facilities, inclusive of:
- Detailed engineering calculations
- Production of detailed 3D models and construction drawings
- Specifications
- Reports as required
- Perform site inspection, testing, and commissioning of equipment and facilities as required, which may include travel within Canada and abroad
- Utilize excellent verbal and written communication skills to interact effectively with clients and other employees
- Develop and maintain expert level knowledge of applicable codes and standards for the design and construction of nuclear and biocontainment facilities in Canada and internationally as required
- Develop and maintain expert level skills in required software packages including REVIT
- Execute all work in accordance with Merrick and project specific Quality Assurance procedures
- Exercise excellent independent judgement and initiative to complete design tasks
- Work independently and in a team environment based upon Merrick’s hybrid arrangement comprised of office, remote, and onsite work.
- We are looking for a mechanical engineer / designer with experience in mechanical building design for government, academic, and private clients. Demonstrated experience in as many of the following areas as possible is an asset: HVAC, plumbing/process, fire protection and controls design
- A minimum of two (2) years related experience.
- Experience in aspects of mechanical building design including planning, calculations, equipment selection, schematic design, production of construction documents (drawings and specifications), and construction administration is a strong asset
- Laboratory design and construction knowledge is an advantage.
- Experience in energy modeling and life cycle cost analysis for sustainability design is an asset
- Candidate shall be proficient in the use of REVIT and AutoCAD.
- Candidate shall be proficient in report writing including basis of design reports, specifications, field reports, etc.
- Candidate shall have good verbal and writing skills and be able to interact effectively with clients and other employees and must have strong oral presentation skills.
- Candidate must be able to demonstrate effective problem-solving skills applying mechanical design principals
- Candidate must be able to travel and must possess a current passport. It is anticipated that this may include some international travel.
- Work at jobsites will be required inclusive of active construction and or commissioning efforts. Will require access to/from elevated areas, functional and operational equipment and donning of appropriate PPE
- Client requirements for this position require Canadian citizenship or permanent resident status qualified with minimum Reliability clearance level.
- Air travel and business trips will be required within Canada, continental USA and possible overseas work as well.
Journal
Visible seulement par vous. Conservé sur cet appareil, et dans votre compte une fois connecté.