Postuler

Publié hier

Quality Inspector

@ Multimatic Advanced Manufacturing Technologies

Markham, Ontario

Temps plein
Postuler
SIGNAUX

En bref

Multimatic Advanced Manufacturing Technologies is hiring a full-time Quality Inspector to confirm that purchased, produced and shipped materials match engineering intent. The role covers dimensional inspection, FARO ARM measurements, weld macro analysis and customer documentation. The posted pay range is $18.00 to $24.00 per hour.

Responsabilités :

  • Inspect incoming and outgoing components against engineering requirements
  • Maintain inspection records and customer documentation
  • Perform FARO ARM measurements and weld macro analysis
  • Monitor sub-supplier ISIR procedures
  • Participate in continuous improvement activities

Résumé des exigences :

  • Proven blueprint reading and G.D.&T skills
  • College education or equivalent with manufacturing background
  • Precision measuring tool experience
  • Proficiency in Microsoft Word, Excel and PowerPoint
  • Strong time management and ability to prioritize tasks

Outils et compétences

Source et dates

Site carrière / système de candidatures · workday

Date publiée par l’employeur
2026-11-15
Première détection par notre source
2026-11-16
Mise à jour du dossier source
2026-11-16

Ces dates décrivent le dossier source, pas une vérification en direct du recrutement. Consultez l’offre originale.

Détails du poste

NiveauDébutant
DomaineAssurance qualité
Heures par semaine40 (estimé)
Déplacementsavion : aucun · route : aucun
Milieu de travailUsine, Laboratoire
PositionAssis et debout
Exigences physiquesphysique modéré · ordinateur modéré
LanguesEnglish
FormationCollégial (DEC) (exigé)
Domaines d’étudesManufacturing, Industrial technology

Résumé et détails rédigés par l’IA à partir de l’offre; l’offre de l’employeur fait foi.

Multimatic Advanced Manufacturing Technologies

ChampValeur
Offres sur Jobsy8
Description

Scope of Position:

Assure that MAMT delivers only the highest possible quality product. Confirm that all materials purchased, produced, and shipped by MAMT are as per the engineering intent. This includes dimensional integrity of all components and assemblies, certification of all materials and compliance to all applicable functional requirements.

Key Responsibilities

Ø Establish and follow procedures to ensure that both purchased materials and components comply with all applicable engineering requirements (dimensional, functional, etc.). This includes:

· Outsourced fabricated components and assemblies.

· Inspection of all incoming prototype parts including all necessary documentation. This requires an ISIR procedure for MAMT sub-suppliers that must be established and monitored.

Ø Establish and follow procedures to ensure that in-process and inventoried materials are available to meet customer requirements. This includes:

· Maintain records of all in-process and inventoried materials as to quantity, engineering level and quality inspection.

· Work with Prototype PM’s/Quality Leads to assure timely delivery of purchased goods to meet build schedules.

· Maintain total control of all raw materials (previously certified) and release to prototype shop through appropriate system.

Ø Establish and follow procedures to assure that completed work is comprehensively inspected and results reported in the appropriate manner prior to shipment to customer. This includes:

Obtain all customer required documentation and procedures and maintain an up-to-date library of this information.

Ø Develop an MAMT inspection documentation standard to be utilized when not provided by the customer.

· Inspect all outgoing components and assemblies and report data in appropriate form and prepare all required customer documentation to be delivered with outgoing goods.

Ø Obtain and maintain any required inspection equipment required to perform the above tasks. Maintain a clean, organized inspection area. Aid the MAMT prototype staff in the inspection of components under development assuring those acceptable methods and practices are utilized throughout the organization.

Ø Advise management of a potential problems or concerns and any opportunities for improvement.

Ø Perform FARO ARM Measurements.

Ø Perform Weld macro analysis to compare weld parameters against customer standards and provide feedback accordingly. This includes cutting, polishing and other samples preparation (as required)

Ø Perform other duties as determined by the Quality Leads, Quality Manager, Prototype Manager, Assistant General Manager or General Manager.

Ø Participate in MAMT’s continuous improvement activities.

Ø Follow all QS9000 procedures

Ø Follow all company safety rules, policies and procedures.

Basic Requirements:

Ø Must have proven proficiency in blueprint reading and interpretation including G.D.&T as well as technical specification.

Ø College education or equivalent with manufacturing/industrial background.

Ø Ability to use a variety of precision tools, including micrometres and callipers.

Ø Willingness to contribute to a collaborative team and work environment to help maintain a high-quality standard.

Ø Able to manage time effectively, priority tasks and achieve set targets.

Ø Ability to tune out outside distractions during work hours

Ø Proficient in Microsoft Word, Excel, PowerPoint.

This job posting is for an existing vacancy. The total cash compensation range for this position is expected to be:

$18.00 - $24.00

To learn more about Multimatic, check out our youtube channel - https://www.youtube.com/watch?v=psOjJIh3t90

If you are interested in this position, apply by sending us your cover letter and resume.

We thank all interested candidates in advance; however, only individuals selected for interviews will be contacted.

As part of our commitment to ensuring our employment practices are fair, accessible, and inclusive of persons with disabilities, recruitment-related accommodations for disabilities, are available upon request throughout the recruitment and assessment process for applicants with disabilities.

Emplois semblables

  • Quality Inspector

    Concord, ON

    BV GLAZING

    1+ ansCandidates need at least one year of experience, ideally in IGU inspection or installation. They must be detail-oriented, comfortable with computers and MS Office, and able to read assembly drawings.

    Vernier, calipers, tape measure, low-E detector, digital protractor, MS Office

  • Quality Inspector

    Mississauga, ON

    Garland Commercial Ranges Ltd

    1+ ansCandidates need 1-2 years of manufacturing experience, preferably in sheet metal fabrication and assembly, plus knowledge of inspection, metrology, sampling plans and quality fundamentals. They must read assembly drawings, use MS Office and QAD, and pass a Quality Control Test.

    QAD, Excel, PowerPoint, Microsoft Word, Measuring equipment, Machines and tools

  • Quality Inspector - Level 1

    Guelph, ON
    Temps plein

    Linamar - New

    Candidates need a high school diploma or equivalent and the ability to read blueprints, GD&T and procedure manuals. They must use measuring equipment such as micrometers, verniers, height and bore gauges and understand SPC charts. Machining or casting experience, TS-16949 familiarity and CMM operation are assets.

    CMM, bore scope, micrometer, vernier, height gauge, bore gauge

  • Quality Inspector

    Woodstock, ON
    Temps plein

    Q2 Management: Q2 Management™ is a ISO-certified quality assurance solutions provider to the manufacturing industry.

    Candidates need attention to detail, a strong desire for quality work, and the ability to stand for 8-12 hours. Safety shoes and safety glasses are required.

    InspeQ Tech

  • Senior Quality Inspector (Semiconductor & Photonics)

    Kanata, ON
    Temps plein

    Inpho

    5+ ansCandidates need a diploma or degree in electronics, materials science or a related technical field, or equivalent experience, plus at least 5 years in the semiconductor industry. Hands-on microscopic inspection, defect identification, ESD and cleanroom practice, and documentation skills are required.

    Optical microscope, AOI system, Digital imaging system, Precision measurement equipment, Epicor

  • Quality Inspector

    Windsor, ON

    Select Finishing

    2+ ansCandidates need a high school diploma and 2 to 3 years of manufacturing, production or general labour experience. Advanced knowledge of finishing and paint processes, strong documentation skills and mentoring experience are needed.

    Inspection, Quality control, Statistical quality control, Regulatory compliance, Workflow, Documentation

  • Quality Inspector

    Windsor, ON

    Select Finishing Ltd

    2+ ansSelect Finishing needs candidates with a high school diploma and 2 to 3 years in manufacturing, production or general labour. Strong knowledge of finishing and paint processes, precise rework skills and good record-keeping are required, and mentoring experience is preferred.

    Inspection, Quality control, Statistical quality control, Regulatory compliance, Workflow, Documentation

  • Quality Inspector

    Lively, ON
    60k–80k $/anSur placeTemps plein

    Soluroc

    3+ ansSoluroc needs candidates with 3+ years of quality inspection experience in metal fabrication, piping or pressure equipment. They must read drawings and weld symbols, use measuring tools and write clear English reports, and handle shop-floor conditions and lifts up to 25 kg.

    calipers, micrometers, thickness gauges, holiday testers, Excel

Lieux et modes de travail

Lieux

Tout le CanadaTélétravail · Hybride · Sur place · Sur le terrain

Astuce : ajoutez le télétravail pour élargir la recherche.

Exclure des lieux

Mode de travail

Offres de cette entreprise dans les résultats

Voici les offres de cette entreprise chargées dans votre recherche. Elle peut avoir d’autres postes ouverts.