Connexion Inscription gratuite
Postuler

Publié il y a 2 mois

Rebar Fabricator

@ Nucor Rebar Fabrication

Toutes ses offres Site Web

Brampton, Ontario

24 $/h
Postuler
SIGNAUX

En bref

Nucor Rebar Fabrication is hiring an entry-level Rebar Fabricator to bend, cut, bundle and load reinforcing steel bars to customer orders. The work runs on shop machinery such as shears, benders, the Fabmatic and overhead cranes, with evening shifts and possible overtime. The posting states a starting wage of $24/hr.

Salaire :

24 $ de l’heure

Responsabilités :

  • Cut reinforcing steel bars to specified lengths
  • Bend bars to specified shapes on bending and Fabmatic machines
  • Operate overhead crane to move and select material
  • Unload trailers and load orders for shipping
  • Maintain a clean and safe shop area

Résumé des exigences :

  • Basic math skills for bar measurements
  • High school diploma or equivalent
  • Shop experience operating shears, cranes and benders preferred
  • Ability to work evening shifts and overtime
  • Adherence to shop safety policies

Outils et compétences

shearing machinebending machineFabmaticoverhead cranepower sawspray gun
Source et dates

Site carrière / système de candidatures · dayforce-feed

Date publiée par l’employeur
2026-09-02
Première détection par notre source
2026-10-13
Mise à jour du dossier source
2026-10-15

Ces dates décrivent le dossier source, pas une vérification en direct du recrutement. Consultez l’offre originale.

Détails du poste

NiveauDébutant
DomaineFabrication et production
Horairesoir, heures supplémentaires
Déplacementsavion : aucun · route : aucun
Milieu de travailUsine, Entrepôt
PositionAssis et debout
Exigences physiquesphysique élevé · ordinateur aucun
FormationSecondaire (DES) (exigé)

Résumé et détails rédigés par l’IA à partir de l’offre; l’offre de l’employeur fait foi.

Postuler

Nucor Rebar Fabrication

Profil d’entreprise sauvegardé

Renseignements historiques provenant d’un profil The Jobs API sauvegardé (champs LinkedIn/Crunchbase). Ils ne sont pas vérifiés en temps réel; les chiffres peuvent avoir changé. Les valeurs manquantes restent inconnues.

BE PART OF SOMETHING BIGGER AT NUCOR REBAR FABRICATION

Description complète de l’entreprise

Nucor Rebar Fabrication is a leader in detailing, fabrication and installation of reinforcing steel; but that's not all we do. We can also assist with construction know-how. During the design phase of a project, we work with our customers to find cost effective alternatives. We can recommend changes that result in time or materials savings and lead to overall cost reduction.​ When you work with us, it's not just rebar you're getting, it's construction expertise accumulated over our many years of experience. We know our teammates are the reason we're able to offer exceptional customer service. We value providing our teammates access to compensation, benefits and time off to make their priorities a possibility. Join our team today!

Abonnés LinkedIn
19 676
Personnes associées sur LinkedIn
1 069
Bureaux déclarés
  • 318 Arvin Ave, Stoney Creek, Ontario L8E 2M2, CA
  • 55 Sumner St, Milford, Massachusetts 01757, US
Autres noms enregistrés
  • Nucor Rebar Fabrication
  • Nucor
Spécialités
  • Rebar
  • Rebar Fabrication
  • and Rebar Detailing
Le profil indique une agence de recrutement
Non
Toutes ses offres Site Web

Nucor Rebar Fabrication is a leader in detailing, fabrication and installation of reinforcing steel; but that's not all we do. We can also assist with construction know-how. During the design phase of a project, we work with our customers to find cost effective alternatives. We can recommend changes that result in time or materials savings and lead to overall cost reduction.​ When you work with us, it's not just…

ChampValeur
SecteurConstruction
Taille1,001-5,000 employees
Siège socialStoney Creek, Ontario
Type d’organisationPublic Company
SpécialitésRebarRebar Fabricationand Rebar Detailing
Offres sur Jobsy27
LinkedInVoir la page
Description

Nucor Rebar Fabrication is North America’s leading fabricator, installer and distributor of concrete reinforcing steel and related products. Nucor Rebar Fabrication provides local service from rebar fabrication shops across North America. Each location is equipped with state-of-the-art fabrication equipment, however, it is OUR TEAM that makes the difference; driving our success with their knowledge, experience and know-how to get your job done. At Nucor Rebar Fabrication we respect, believe and invest in our people, who in turn deliver the highest level in service to our customers.



PURPOSE

Bend, cut, bundle, and load reinforcing steel bars in accordance with customer's orders.

DUTIES AND RESPONSIBILITIES

  1. Demonstrate conduct consistent with Nucor Rebar Fabrication’s vision and values.
  2. This is an entry level position. Incumbent may operate any one of the following machines:
    1. Operate a shearing machine to cut reinforcing steel bars to specific lengths.
    2. Operate a bending machine to bend reinforcing steel bars to specified shape.
    3. Operate overhead crane to move, assemble and select material to be fabricated or shipped.
    4. Operate Fabmatic machine that cuts and bends reinforcing steel bars to specified shapes.
  1. Unload trailers and store material in storage bins.
  2. Assemble and load orders onto trailers for shipping.
  3. Operate power saw for cutting reinforcing steel bars to specified lengths.
  4. Operate a spray gun in the application of epoxy touch up or reinforcing steel bars.
  5. Maintain the shop or designated area in a clean and safe manner.
  6. Assist other employees in any of the above tasks.

MINIMUM QUALIFICATIONS AND EDUCATION REQUIREMENTS

  • Must have basic math skills to be able to calculate bar measurements
  • High School Diploma or equivalent
  • Previous experience working in a shop environment and operating equipment such as shears, overhead cranes, benders, and similar machinery is preferred

SPECIAL DEMANDS

  • Overtime hours may be required
  • Must be able to work evening shift
  • Must be familiar with, and adhere to shop safety policies and procedures

PHYSICAL DEMANDS

  • Some heavy lifting may be necessary
  • Working conditions can be noisy, dusty, hot, cold

Staring Wage: $24/hr

Use of AI in Our Hiring Process: Our recruitment team may use AI-assisted tools to help identify and review candidate applications based on job-related requirements and qualifications. All hiring decisions are made by humans.

Existing Vacancy: This job posting is for an existing vacancy



Nucor Rebar Fabrication is an Equal Opportunity Employer. Nucor Rebar Fabrication is committed to providing accommodations for applicants with disabilities; please contact us if you require accommodation during the recruitment process.

Emplois semblables

  • Rebar Fabricator

    Bedford, NS
    22,56–27,58 $/hTemps plein

    OSCO

    Candidates need experience in a rebar shop using shear machines, bending machines and overhead cranes, plus strong math skills and the ability to read a tape measure. They must have their own transportation, communicate in English at an intermediate level, and handle heavy lifting up to 50 lbs.

    shear machine, bender machine, overhead crane, tape measure, wire, truck

    Rebar Fabricator

    Saint John, NB
    Temps plein

    OSCO

    1+ ansCandidates need 1 to 3 years of steel fabrication experience and the ability to read blueprints and measuring tapes. Overhead crane or rigging experience is an asset, and high school completion is required.

    Band saw, CNC punch, CNC drill, Shear, CNC bending machine, Overhead crane

  • Rebar Fabricator

    Bedford, NS
    22,56–27,58 $/hTemps plein

    Enterprise Wide

    Allstar Rebar needs candidates with prior rebar shop experience using shear machines, bending machines and overhead cranes. Candidates must have their own transportation, intermediate English, strong math and measurement skills, and the ability to lift up to 50 lbs and stand for long periods.

    shear machine, bender machine, overhead crane, tape measure, wire

    Rebar Fabricator

    Saint John, NB
    Temps plein

    Enterprise Wide

    1+ ansCandidates need 1 to 3 years of steel fabrication experience, the ability to read blueprints and measuring tapes, and a high school diploma. Overhead crane or rigging experience is an asset.

    band saw, CNC punch, shear, CNC drill, CNC bending machine, overhead crane

  • Rebar Fabricator

    Fort Saskatchewan, AB

    Nucor Rebar Fabrication

    Candidates need basic math skills to calculate bar measurements and a high school diploma or equivalent. Welding experience is not required, but a willingness to learn is essential, along with a commitment to shop safety.

    Cage forming machine, MIG welder, Overhead crane

    Rebar Fabricator

    Fort Saskatchewan, AB

    Nucor Rebar Fabrication

    Candidates need basic math skills to calculate bar measurements and a high school diploma or equivalent. Welding experience is not required, but a willingness to learn is essential, along with a commitment to shop safety.

    Cage forming machine, MIG welder, Overhead crane

    Rebar Fabricator

    Brampton, ON
    24 $/h

    Nucor Rebar Fabrication

    Candidates need basic math skills for bar measurements and a high school diploma or equivalent. Shop experience operating shears, cranes, benders or similar machinery is preferred, along with the ability to work evening shifts and follow shop safety rules.

    shearing machine, bending machine, Fabmatic, overhead crane, power saw, spray gun

Lieux et modes de travail

Lieux

Tout le CanadaTélétravail · Hybride · Sur place · Sur le terrain

Astuce : ajoutez le télétravail pour élargir la recherche.

Exclure des lieux

Mode de travail

Offres de cette entreprise dans les résultats

Voici les offres de cette entreprise chargées dans votre recherche. Elle peut avoir d’autres postes ouverts.