Transportation Maint Tech I, II, III- Hondo

Performs highly complex transportation operations or maintenance support work such as: contract maintenance and/or material and process inspection; roadway maintenance and repair; operates light and heavy equipment; preventative and minor maintenance on equipment; traffic control; helping the public during emergency situations; and training other employees. Work requires contact with private entities. Employees at this level perform work independently on assignments; however, all unusual issues are referred to the supervisor.

Essential Duties:

Transportation Maintenance Tech I

• Assists with traffic control; places and gathers cones, warning signs and barricades; flags traffic.
• Performs preventive maintenance inspections (PMI), routine servicing and minor repairs on equipment and completes various required reports including time-keeping, equipment forms, inventory, accident forms, and PMI.
• Sands or cleans bridges and roads, posts warning signs, helps the public and performs other work as directed during emergency situations such as floods, tornadoes, hurricanes, snowstorms, accidents, and hazardous material spills.
• Operates heavy equipment such as a front-end loader one and a half cubic yards or more, tractor-trailer haul truck, large dragline, shovel, paint striper, and dump truck
• Performs other job responsibilities as assigned.
  
  

Transportation Maintenance Tech II

In addition to the duties listed above

• Assists in inspecting traffic control devices and their placement at construction project sites for compliance with specifications for devices; safety laws, rules, regulations and the Texas Manual on Uniform Traffic Control Devices.
• Maintains highways and rights-of-way; performs roadway repairs; erects and repairs guard rails, highway markers and signs; hauls materials and equipment to job sites.
• Identifies, repairs, and installs signs, delineators, mailbox supports and posts; performs welding; and uses/moves equipment/tools, materials and products.
• Move/picks up litter and roadway debris.
  
  

Transportation Maintenance Tech III

In addition to the duties listed above

• Inspects traffic control devices and their placement at construction project sites for compliance with specifications for devices, safety laws, rules, regulations and the Texas Manual on Uniform Traffic Control Devices.
• May serve as a work crew project lead ensuring work performed meets project specifications.
• Trains other employees.
• Provides support to local law enforcement officials at accident sites; and provides assistance to stranded motorists.
• Operates complex heavy equipment such as a motor grader, large excavator, heavy bulldozer, crane, herbicide truck, heavy asphalt paving machine, self-propelled asphalt distributor, and profiling/milling machine.
  
  

Minimum Qualifications:

Education:

None Required

Experience:

• Transportation Maintenance Tech I: None Required
• Transportation Maintenance Tech II: 1 year of experience in transportation engineering support, roadway maintenance, construction inspection, heavy equipment operation, or related work experience.
• Transportation Maintenance Tech III: 2 years of experience in transportation engineering support, roadway maintenance, construction inspection, heavy equipment operation, or related work experience.
  
  

(Experience can be satisfied by full time or prorated part time equivalent) Related technical training or education from an accredited institution may be substituted for experience on a year per year basis. Substitutions for Minimum Qualifications

Licenses and Certifications:

Valid driver’s license at the time of application. This position requires driving a state vehicle.

• TMT I/II: Must have a Commercial Class "A" Driver's License with an "N" Endorsement or have obtained a CDL "A” License with an "N" endorsement, within 120 calendar days from date of employment.
• TMT III: Must have a Commercial Class "A" Driver's License with an "N" Endorsement at time of application.
  
  

Preferred Qualifications:

Commercial Driver's License

Competencies:

• Methods, procedures, equipment, and materials used in intermodal transportation engineering construction and maintenance work
• Applicable industry safety standards, guidelines, and specification codes
• Using basic mathematical fundamentals
• Using computers, applicable programs, applications, and systems
• Using applicable hand and power tools, equipment, and mechanical devices of the trade
• Operating light and heavy highway equipment
• Maintaining a safe and effective working relationship with others
• Communicate effectively
• Follow verbal and written instructions
• Materials used in highway/bridge construction and maintenance
• The Texas Manual on Uniform Traffic Control Devices
• Basic vehicle mechanics, maintenance and repair procedures
• Applicable surveying procedures, standards, and instruments
• Performing calculations to include material and labor estimates, expenses, technical survey data and engineering calculations
• Prioritizing and organizing work assignments
• Physical Requirements and Working Conditions:
• Subject to inside and outside environmental conditions
• Subject to extreme cold and heat; below 32 and above 100 degrees for more than one hour
• Subject to noise
• Subject to vibration
• Subject to hazards-moving vehicles/mechanical parts, high places/heat, or chemicals
• Required to wear protective gear-respirator, hard hat, or other device
• Medium work: Lift up to 50 lbs at a time and frequently lift or carry objects up to 25 lbs
• Balancing-walking, standing, crouching on various surfaces without falling
• Kneeling-bending legs at knee to come to a rest on knee(s)
• Reaching-extending hand(s) and arm(s) in any direction
• Standing-prolonged periods of time
• Walking-moving on foot to accomplish tasks: long distance/from one work site to another
• Pushing-using upper extremities to press against object with force to move in a direction
• Pulling-using upper extremities to exert force moving objects in a sustained motion
• Lifting-raising objects from lower to higher position/horizontally to a different position
• Talking-expressing or exchanging ideas by spoken words
• Close Visual Acuity-work includes data/figures; view a computer screen; extensive reading
• Visual Acuity-operate machines, such as drill presses, power saws, and mills
• Visual Acuity-operate motor vehicles and heavy equipment
  
  

Conditions of Employment:

Please read the Standard Conditions of Employment (TxDOT) for all positions.

This job has been identified as physically demanding and will require a pre-employment physical.

This is a Safety Impact position and you will be required to pass a pre-employment drug test and will be subject to random drug testing.

Please note that the Department of Transportation's Drug and Alcohol Testing Regulation – 49 CFR Part 40, at 40.151(e) – does not authorize “medical marijuana” under a state law to be a valid medical explanation for a positive drug test result for an employee in this position.

Position Information

The Hondo Maintenance Office is located in Medina county just west of San Antonio. Our Maintenance personnel are responsible for maintaining over 800 lane miles, including the major corridors on US 90 and IH 35. We use practices such as base repair, maintainer level up, pothole repair, sign/delineation maintenance, and other operations to keep state roadways safe for the traveling public. If you are interested in joining our dedicated team, you are encouraged to apply.

Annual Salary Ranges

Transportation Maintenance Technician I (A16) - $40,918 - $61,130

Transportation Maintenance Technician II (A17) - $42,976 - $64,469

Transportation Maintenance Technician III (A18) - $45,521 - $71,055

This position is for one (1) Transportation Maintenance Tech I, II or III. The Texas Department of Transportation reserves the sole right in determining the level of position based on the applicant's work experience, education, skill level and all other appropriate factors, and based on business needs.

Benefits And Perks

At TxDOT, we value work-life balance and are committed to providing our employees with a comprehensive range of benefits and programs, including:

• Retirement Plans
• Alternative and/or Flexible Work Schedules
• Paid Leave and Holidays
• Health Premiums paid at 100% for Full-Time Employees
• On-the-Job Training
• Tuition Assistance Program
• Holistic Wellness Program with Leave Incentives
• Career Development and Advancement Opportunities
• Family-Friendly Policies and Programs
  
  

In 2024, TxDOT was recognized as a Best Place for Working Parents, and many of our offices statewide are also designated as Texas Mother-Friendly Worksites. These recognitions reflect our dedication to supporting families and promoting a healthy work-life balance.

For a complete list of our total compensation package please visit our Total Compensation Package website

To view benefits available to all State of Texas employees visit Benefits at a Glance | ERS (texas.gov)

Job

Maint/Skilled Craft/Ferry Ops

Schedule

Full-time

Employee Status

Regular

Job Level

Non-Management

Job Posting

Oct 29, 2026, 3:17:01 PM

State Job Title/s

Transportation Mntnce Spec I/II/III

Military Occupational Specialty (MOS)

TxDOT is committed to hiring veterans. To assist in determining whether your military experience may pertain to the minimum requirements for this position, Military Occupational Specialty (MOS) codes from each branch of the U.S. Armed Forces have been assigned to each state classification code/title where applicable. The MOS codes are grouped by occupational category.

Click on the appropriate occupational category to view the MOS codes .

Applicant Information

The Texas Department of Transportation is an Equal Opportunity Employer.

If requested, reasonable accommodations will be made for persons with disabilities for any part of the employment process in accordance with the Americans with Disabilities Action of 1990.

Additional Applicant Information