Postuler

Publié il y a 4 jours

Machine Operator

@ Forum Energy Technologies

Calgary, Alberta

Temps plein
Postuler
SIGNAUX

En bref

Forum Energy Technologies is hiring a Machine Operator for its manufacturing facility to run wireline cable manufacturing equipment as a team member. The work includes quality inspections, documentation, preventive maintenance and Lean and 5S improvement, on a full-time basis.

Responsabilités :

  • Operate wireline cable manufacturing equipment efficiently
  • Complete quality inspection and set-up checklists
  • Report equipment issues and quality non-conformances
  • Complete assigned preventive maintenance tasks
  • Participate in safety, quality and efficiency improvements

Résumé des exigences :

  • Prior manufacturing or similar experience preferred
  • Forklift or reach truck certification
  • Ability to lift 45 lbs unassisted
  • High attention to detail
  • Analytical and problem-solving skills
  • High school diploma or equivalent

Outils et compétences

Source et dates

Site carrière / système de candidatures · ultipro

Date publiée par l’employeur
2026-11-02
Première détection par notre source
2026-11-02
Mise à jour du dossier source
2026-11-02

Ces dates décrivent le dossier source, pas une vérification en direct du recrutement. Consultez l’offre originale.

Détails du poste

NiveauDébutant
DomaineFabrication et production
Heures par semaine40 (estimé)
Déplacementsavion : aucun · route : aucun
Milieu de travailUsine
PositionSurtout debout
Exigences physiquesphysique élevé · soulever 45 lb · ordinateur faible
Permis et certificationsForklift Certification, Reach Truck Certification
FormationSecondaire (DES) (exigé)

Résumé et détails rédigés par l’IA à partir de l’offre; l’offre de l’employeur fait foi.

Forum Energy Technologies

Profil d’entreprise sauvegardé

Renseignements historiques provenant d’un profil The Jobs API sauvegardé (champs LinkedIn/Crunchbase). Ils ne sont pas vérifiés en temps réel; les chiffres peuvent avoir changé. Les valeurs manquantes restent inconnues.

Smart Solutions. Powerful Products.

Description complète de l’entreprise

FET (Forum Energy Technologies, Inc.) is a global company, serving the crude oil, natural gas, and renewable energy industries. FET is headquartered in Houston, TX with quality manufacturing, efficient distribution, and service facilities conveniently located to support the major energy-producing regions of the world. Forum’s products and services range from the underwater reservoir to the refinery, from the sea floor to the above ground transportation line. We pride ourselves on giving you a comprehensive offering of solutions to maximize your operations and improve your bottom line. Our customers are our partners and we work with them to solve their ever-changing challenges.

Abonnés LinkedIn
48 626
Personnes associées sur LinkedIn
1 284
Bureaux déclarés
  • 10344 Sam Houston Park Dr, suite 300, Houston, Texas 77064, US
Catégories d’activité
  • Machinery Manufacturing
  • Renewable Energy
  • Oil and Gas
  • Industrial
  • Energy
  • Professional Networking
  • Telecommunications
  • Manufacturing
Autres noms enregistrés
  • Forum Energy Technologies
Spécialités
  • Subsea Technologies
  • Drilling Equipment
  • Production Equipment
  • Valve Solutions
  • Oilfield Equipment
  • Artificial Lift Equipment
  • Manufacturing
  • Oilfield
  • Well Stimulation Equipment
  • Well Intervention Equipment
  • Plug and Perf Equipment
  • Well Construction
  • and Well Completion Equipment
Le profil indique une agence de recrutement
Non
Investissement total déclaré
100 000 000

La devise et la date d’observation ne sont pas fournies; ce n’est ni une valorisation actuelle ni une ronde de financement.

FET (Forum Energy Technologies, Inc.) is a global company, serving the crude oil, natural gas, and renewable energy industries. FET is headquartered in Houston, TX with quality manufacturing, efficient distribution, and service facilities conveniently located to support the major energy-producing regions of the world. Forum’s products and services range from the underwater reservoir to the refinery, from the sea…

ChampValeur
SecteurOil and Gas
Taille1,001-5,000 employees
Siège socialHouston, Texas
Type d’organisationPublic Company
Fondée en2005
SpécialitésSubsea TechnologiesDrilling EquipmentProduction EquipmentValve SolutionsOilfield EquipmentArtificial Lift EquipmentManufacturingOilfieldWell Stimulation EquipmentWell Intervention Equipment
Offres sur Jobsy15
LinkedInVoir la page
Description

Summary

The Machine Operator is a team member in the day-to-day operations of the company’s manufacturing facilities. Their work must adhere to all quality, safety, and efficiency policies. The Machine Operators report to the Director of Operations, however for day-to-day guidance relative to plant operations, Machine Operators report to their Team Leader.

Job Duties/Responsibilities

  • Effectively and efficiently operate wireline cable manufacturing equipment
  • Execute quality inspection, and set-up checklists
  • Complete documentation thoroughly and accurately
  • Report and document product quality non-conformances immediately.
  • Complete assigned preventive maintenance tasks (lubricating, cleaning, etc.)
  • Cross-train in all areas of operation
  • Identify and report equipment issues (look, listen, feel) to prevent equipment breakdown or failure
  • Participate in improvement initiatives related to safety, quality, and efficiency in area of responsibility
  • Diligent reporting of safety, quality, maintenance, or other issues to ensure important improvement ideas are communicated
  • Develop a Lean Manufacturing mindset, focused on removing waste in operations to deliver quality products at lower cost
  • Maintain high standards of housekeeping are sustained
  • Ensure all tools, materials & equipment are stored in designated area
  • Other duties as assigned.

Skills/Knowledge

  • Prior experience in a manufacturing or similar environment
  • Understand the principles of 5S and Lean Manufacturing preferred
  • Able to change task or direction while maintaining organization
  • Good organizational skills
  • Forklift/Reach Truck Certification
  • Ability and willingness to lift 45 lbs unassisted
  • High attention to detail
  • Analytical thinker and problem-solving capabilities
  • Ability to work in a team environment

Education

  • High School Diploma or equivalent.

Experience

  • 1+ year of manufacturing experience preferred.

About FET

FET (Forum Energy Technologies, Inc.) is a global company, serving the crude oil, natural gas, and renewable energy industries. FET is headquartered in Houston, TX with quality manufacturing, efficient distribution, and service facilities conveniently located to support the major energy-producing regions of the world. Forum’s products and services range from the underwater reservoir to the refinery, from the sea floor to the above ground transportation line. We pride ourselves on giving you a comprehensive offering of solutions to maximize your operations and improve your bottom line. Our customers are our partners and we work with them to solve their ever-changing challenges.

FET is an Equal Opportunity Employer. FET does not discriminate on the basis of race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected under federal, state, or local law. All employment decisions and practices at FET are subject to the foregoing non-discrimination provisions and are based solely on merit, competence, performance, and business needs at the time.

As part of our hiring process, we may use technology, including AI-enabled tools, to help review and assess applications based on job-related criteria. All hiring decisions are made by our recruitment team and hiring managers.

Emplois semblables

  • Machine operator

    Edmonton, AB
    25 $/hContrat

    Randstad Canada

    Candidates need hands-on experience setting up or running CNC machinery in a shop, a strong eye for quality control, and practical skill with calipers, micrometers and gauges. They must be ready to work onsite in Nisku, AB.

    CNC machinery, Micrometers, Calipers, Precision gauges

    Machine Operator – Manufacturing

    Alberta
    24–26,50 $/hContrat

    Randstad Canada

    Candidates need hands-on experience with heavy lifting and manual labor over long shifts, and prior factory or industrial shop work running equipment. They must have a reliable vehicle, since the site has no public transit, and be ready to sign an Overtime Averaging Agreement before day one.

    Forklift, Mandrel

    Machine operator

    Edmonton, AB
    25 $/hContrat

    Randstad Canada

    Candidates need practical experience setting up or operating CNC machines in an active manufacturing shop. They must be comfortable using micrometers, calipers and gauges to verify tight tolerances, and be reliable, safety-minded and punctual.

    CNC machines, Micrometers, Calipers, Gauges

  • Machine Operator I (Various locations)

    Nisku, AB
    Temps plein

    Silent-Aire Limited Partnership

    Candidates need a high school diploma or equivalent, good English for communicating with the team, and a commitment to safe practices. Manual dexterity and comfort with long periods of standing are needed, and an apprenticeship or extra education is an asset.

    brake, shear, saw, punch, overhead crane, forklift

  • Machine Operator

    Edmonton, AB

    Crossroads C&I Distributors Inc.

    Candidates need basic math skills, prior warehouse experience, and the ability to stand for up to 8 hours and lift up to 23 kg. Forklift certification is preferred but not required.

    band saw, saws, tape measure, forklift, pallet jack

    Machine Operator

    Edmonton, AB

    Crossroads C&I Distributors Inc.

    Candidates need basic math skills and the ability to follow written, oral and diagram instructions. Experience with press machines and warehouse work is an asset, and forklift certification is preferred but not required.

    fabrication equipment, press machine, tape measure, forklift, pallet jack

  • Machine Operator

    Calgary, AB
    Temps plein

    Refresco Brand

    3+ ansCandidates need 3 to 5 years of food or beverage manufacturing experience and a high school diploma. Strong communication, mechanical aptitude and the ability to work safely under production pressure are needed, with beverage equipment experience preferred.

    depalletizer, filler, labeler, carton packer, case packer, palletizer

  • Machine Operator (Day Shift)

    Crossfield, AB
    26,50 $/hSur placeTemps plein

    Carlisle: Carlisle Construction Materials (CCM) is a diversified manufacturer and supplier of premium building products for the commercial and residential…

    Candidates need a high school diploma or GED (preferred), to be at least 18, and a strong work ethic with attention to detail. Prior manufacturing experience is preferred, along with basic math, computer and measuring skills.

    calculator, measuring devices, hand tools, computer

Lieux et modes de travail

Lieux

Tout le CanadaTélétravail · Hybride · Sur place · Sur le terrain

Astuce : ajoutez le télétravail pour élargir la recherche.

Exclure des lieux

Mode de travail

Offres de cette entreprise dans les résultats

Voici les offres de cette entreprise chargées dans votre recherche. Elle peut avoir d’autres postes ouverts.