Postuler

Publié il y a 18 jours

Maintenance Millwright

@ Amrize

Dundas, Ontario

Postuler
SIGNAUX

En bref

Amrize is hiring a Maintenance Millwright for aggregate plant work involving installation, maintenance, repair and troubleshooting of stationary industrial machinery. The role requires a Red Seal or Industrial Mechanic Millwright certification and offers health and dental benefits, a pension plan, and an EFAP under the CBA.

Responsabilités :

  • Install, align and repair stationary industrial machinery
  • Read blueprints and schematics to set work procedures
  • Install and maintain hydraulic, pneumatic and PLC systems
  • Operate cranes, hoists and machine tools
  • Inspect, troubleshoot and perform routine maintenance

Résumé des exigences :

  • Red Seal or Industrial Mechanic Millwright certification
  • Ability to lift up to 50 lbs and climb stairs
  • Ability to work in tight and dusty areas
  • Clean shaven for respirator fit tests

Outils et compétences

Avantages mentionnés

Assurance maladieSoins dentairesRégime de retraiteProgramme d’aide
Source et dates

Site carrière / système de candidatures · successfactors

Date publiée par l’employeur
2026-10-20
Première détection par notre source
2026-10-09
Mise à jour du dossier source
2026-11-06

Ces dates décrivent le dossier source, pas une vérification en direct du recrutement. Consultez l’offre originale.

Détails du poste

DomaineEntretien et réparation
Déplacementsavion : aucun · route : aucun
Milieu de travailUsine, Extérieur
PositionAssis et debout
Exigences physiquesphysique élevé · soulever 50 lb · ordinateur faible
Permis et certificationsIndustrial Mechanic Millwright certification, Red Seal
Avantages mentionnésRégime de retraite, Rabais employé

Résumé et détails rédigés par l’IA à partir de l’offre; l’offre de l’employeur fait foi.

Amrize

Profil d’entreprise sauvegardé

Renseignements historiques provenant d’un profil The Jobs API sauvegardé (champs LinkedIn/Crunchbase). Ils ne sont pas vérifiés en temps réel; les chiffres peuvent avoir changé. Les valeurs manquantes restent inconnues.

Description complète de l’entreprise

Amrize (NYSE: AMRZ) is building North America, as the partner of choice for professional builders with advanced branded solutions from foundation to rooftop. With over 1,000 sites and a highly efficient distribution network, we deliver for our customers in every U.S. state and Canadian province. Our 19,000 teammates uniquely serve every construction market from infrastructure, commercial and residential to new build, repair and refurbishment. Amrize achieved $11.8 billion in revenue in 2025 and is listed on the New York Stock Exchange and the SIX Swiss Exchange. We are ready to build your ambition.

Abonnés LinkedIn
113 445
Personnes associées sur LinkedIn
3 400
Bureaux déclarés
  • 8700 W Bryn Mawr Ave, Chicago, Illinois 60631, US
Catégories d’activité
  • Business Development
  • Infrastructure
  • Consulting
Autres noms enregistrés
  • Amrize
Le profil indique une agence de recrutement
Non
Investissement total déclaré
3 400 000 000

La devise et la date d’observation ne sont pas fournies; ce n’est ni une valorisation actuelle ni une ronde de financement.

Amrize (NYSE: AMRZ) is building North America, as the partner of choice for professional builders with advanced branded solutions from foundation to rooftop. With over 1,000 sites and a highly efficient distribution network, we deliver for our customers in every U.S. state and Canadian province. Our 19,000 teammates uniquely serve every construction market from infrastructure, commercial and residential to new…

ChampValeur
SecteurConstruction
Taille10,001+ employees
Siège socialChicago, Illinois
Type d’organisationPublic Company
Offres sur Jobsy169
LinkedInVoir la page
Description

Join Amrize as a Maintenance Millwright and help construct what's next. If you're ready to put your skills to work on projects that matter — and build a career with a company that’s building North America — we want to hear from you!

ABOUT THE ROLE

Aggregate plant millwrighting involves the installation, maintenance, repair and troubleshooting of stationary industrial machinery.

WHAT YOU’LL ACCOMPLISH

  • Promotes a positive safety culture through leadership by example; performs all work activities following all relevant safety policies/procedures ensuring alignment with the company’s vision and critical success factors.
  • Read blueprints, diagrams and schematic drawings to determine work procedures.
  • Install, align, dismantle and move stationary industrial machinery and mechanical equipment, such as pumps, fans, tanks, conveyors, furnaces and generators according to layout plans using hand and power tools.
  • Install, troubleshoot and maintain power transmission, vacuum, hydraulic and pneumatic systems, and programmable logic controls.
  • Assemble machinery and equipment prior to installation using hand and power tools and welding equipment.
  • Operate hoisting and lifting devices such as cranes, jacks and tractors to position machinery and parts during the installation, set-up and repair of machinery.
  • Operate machine tools such as drills and grinders to fabricate parts required during overhaul, maintenance or set-up of machinery.
  • Inspect and examine machinery and equipment to detect and investigate irregularities and malfunctions.
  • Adjust machinery and repair or replace defective parts; clean, lubricate and perform other routine maintenance work.
  • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviours.

WHAT WE’RE LOOKING FOR

  • All applicants must have their Industrial Mechanic Millwright certification from the college of trades or their interprovincial red seal certification.
  • Candidate must be a Licensed Red Seal Millwright
  • Physical ability to perform tasks requiring bending, kneeling, climbing multiple flights of stairs, lifting up to 50lbs, and working in tight areas and dusty environments.

Additional Requirements:

  • Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests.

WHAT WE OFFER

  • A comprehensive Health & Dental benefits plan for you and your dependents as outlined in the CBA.
  • A Pension Plan designed to support you through various stages of your career and life, as outlined in the CBA.
  • Healthy Living support through an EFAP, offering confidential assistance for work, health, or life challenges.
  • Service recognition awards to celebrate your contributions.
  • Perks & discounts on a variety of products and services.
  • An inclusive and welcoming environment where everyone can be themselves.
  • A collaborative work culture in a supportive and team-oriented work environment.
  • Company-provided personal protective equipment ensuring your safety and comfort on the job.

This posting is for an existing vacancy at Amrize Canada Inc.

Emplois semblables

  • Maintenance Millwright

    Milton, ON
    30–45 $/h

    Chudleigh's Bakery

    5+ ansCandidates need a Millwright Ticket 433A or Apprenticeship Level 4, 5+ years in manufacturing (food industry preferred), and experience with hydraulic and pneumatic systems. They also need strong problem-solving skills, basic computer skills, and flexibility for weekends and overtime.

    CMMS, Excel, Outlook, Welding equipment, Machining equipment, Hand tools

  • Maintenance Millwright - Continental Rotating

    Kitchener, ON
    Temps plein

    OpTalent

    Candidates need a licensed millwright or electrician credential and the ability to work continental shifts across days, nights and weekends. Experience with high-speed packaging or continuous production lines, and knowledge of pneumatic, hydraulic and electrical controls, are assets.

    welding equipment, machining equipment, pneumatic systems, hydraulic systems

  • Maintenance Millwright (4pm to 12am)

    Concord, ON
    43,50 $/h

    Wonderbrands

    5+ ansCandidates need a valid Red Seal Millwright licence, 5+ years of industrial mechanical experience (food industry preferred), and solid hydraulic, pneumatic and machine shop skills. Good problem solving, teamwork and comfort with computers are also required.

    Lathe, Welding equipment, Hand tools, Power tools, Computer

  • Maintenance Millwright , Elora

    Elora, ON
    43 $/h

    TalentWorld: TalentWorld is a full-service recruitment and staffing agency that specializes in outsourcing, without losing the human element.

    3+ ansCandidates need a valid 433A Industrial Mechanic (Millwright) licence with apprenticeship and 3 to 5 years of industrial millwright experience. Strong mechanical troubleshooting, welding and fabrication skills, and the ability to work independently on night shifts are required.

    welding equipment, lift truck batteries and chargers, plant machinery

  • Maintenance Millwright (433A)

    Cambridge, ON
    43,30 $/hTemps plein

    Stampede Culinary Partners

    1+ ansCandidates need a Grade 12 education, an Industrial Millwright Certificate of Qualification (433A) or equivalent, and at least one year of maintenance or millwright experience. Strong troubleshooting and the ability to lift up to 50 lbs are required.

    MS Excel, MS Word, MS PowerPoint, forklift

  • Maintenance Millwright

    Listowel, ON
    40–44 $/hTemps plein

    EFS-plastics Inc.

    2+ ansEFS-plastics needs candidates with millwright experience in a manufacturing setting, ideally a Red Seal 433A licence. They must work independently, read drawings and schematics, and be safe with lifting equipment and team communication.

    CCMS, forklift, aerial lift, telehandler, hoisting devices

  • Maintenance Millwright

    Beaverton, ON

    Flex-N-Gate

    1+ ansCandidates need a high school diploma, a Red Seal millwright licence or 8 years of practical experience, and 1 to 3 years in industrial maintenance. They must read drawings and manuals, know hydraulics and pneumatics, and work independently under pressure.

    stamping press, assembly machines, hydraulic systems, pneumatic systems

  • Senior maintenance millwright

    Burlington, ON
    40–45 $/hTemps plein

    Saint-Gobain

    10+ ansCandidates need a valid Ontario Industrial Mechanic Millwright (433A) certification and 10+ years of industrial maintenance experience preferred. Strong knowledge of hydraulics, pneumatics, power transmission and blueprints, plus strong English communication, is needed.

    Fiix, forklift, hand tools, power tools, welding equipment, PLC

Lieux et modes de travail

Lieux

Tout le CanadaTélétravail · Hybride · Sur place · Sur le terrain

Astuce : ajoutez le télétravail pour élargir la recherche.

Exclure des lieux

Mode de travail

Offres de cette entreprise dans les résultats

Voici les offres de cette entreprise chargées dans votre recherche. Elle peut avoir d’autres postes ouverts.