Publié il y a 24 jours
Process Engineer (pre-FEED/FEED)
@ PSL
Airdrie, Alberta
En bref
PSL is hiring a Process Engineer (pre-FEED/FEED) on a full-time basis, with contract or employee arrangements both under consideration. The role covers heavy oil projects for domestic and international clients, from FEED studies to turnkey EPFC projects, with travel for startup and commissioning and mentoring of junior engineers. A P.Eng. registered with APEGA (or eligible) and 5+ years of heavy oil processing experience are required.
Responsabilités :
- Lead heavy oil process projects from FEED to turnkey EPFC
- Mentor and check work of junior engineers
- Coordinate with multidisciplinary engineering and design teams
- Oversee fabrication and assembly in Airdrie facility
- Support startup and commissioning, including travel
Résumé des exigences :
- Bachelor's in chemical engineering from an accredited university
- P.Eng. registered or eligible with APEGA
- 5+ years heavy oil processing, including SAGD and water treating
- Experience with HYSYS and other process simulation software
- Strong communication skills
- EPC or fabricator experience is an asset
Outils et compétences
Source et dates
Site carrière / système de candidatures · ultipro
- Date publiée par l’employeur
- 2026-10-14
- Première détection par notre source
- 2026-10-14
- Mise à jour du dossier source
- 2026-10-14
Ces dates décrivent le dossier source, pas une vérification en direct du recrutement. Consultez l’offre originale.
Détails du poste
| Niveau | Senior |
| Domaine | Génie |
| Expérience | 5 an(s) et plus |
| Heures par semaine | 40 (estimé) |
| Déplacements | avion : modérés |
| Milieu de travail | Bureau, Usine, Chez les clients |
| Position | Assis et debout |
| Exigences physiques | physique faible · ordinateur élevé |
| Langues | English |
| Permis et certifications | Professional Engineer (P.Eng.) registered with APEGA |
| Formation | Baccalauréat (exigé) |
| Domaines d’études | Chemical engineering |
Résumé et détails rédigés par l’IA à partir de l’offre; l’offre de l’employeur fait foi.
| Champ | Valeur |
|---|---|
| Siège social | Paris |
| Offres sur Jobsy | 73 |
This position is open for consideration of contract or an employee position
• Work on a variety of heavy oil projects for domestic and international clients. The scope of the projects will vary
from FEED studies, modular packages and full turnkey EPFC projects.
• Acquire in-depth technical expertise in heavy oil processing
• Lead and mentor junior engineers, including delegation, checking, and authentication of professional work products.
• Become a critical decision maker while working with a multidisciplinary team of engineering and design leads
• Develop and build relationships with clients
• Gain practical experience by overseeing the fabrication and assembly of your projects in the Propak, Airdrie
facilities.
• Travel domestically and internationally for startup and commissioning support
• Receive mentorship from senior process engineers, supervisors, and managers to support your technical
development and role as a lead process engineer
Qualifications:
• Bachelor’s degree in chemical engineering from an accredited university
• Professional Engineer registered and in good standing with Alberta Professional Engineers, and Geoscientists of
Alberta (APEGA) or eligible for membership.
• 5+ years of experience in heavy oil processing with specific experience in SAGD, wellpads, and water treating
required.
• Experience designing alternative processes in Glycol Dehydration, Sweetening, Mechanical Refrigeration, Oil
Processing, Oil Refining and Compression is considered an asset.
• EPC and/or Fabricator experience
• Excellent communications skills required to interact with client and internal team members
• Experience working with HYSYS and other engineering software (BR&E ProMax, VMGSim Symmetry, Flarenet)
• Experience in sizing process equipment is an asset (separators, treaters, FWKO, heat exchangers, PSVs, flare
systems, control valves, pumps, reciprocating, rotary screw, and centrifugal compressors)
• Experience with typical process deliverables (PFD, HMB, P&ID, Line List, Design Basis Memorandum, Cause &
Effect Diagrams, Control Narratives, Datasheets, Hydraulics, Line Sizing)
Keywords: Modular or Modularization Acid Gas Amine Ariel Distributor Brazed Aluminum Heat Exchanger (BAHX) Bryan Research and Engineering (BRE or BR&E) Cause and Effect Diagram or “Shutdown Key” (C&E, SDK) Centrifugal Compressor Centrifugal Pump Contract Control Narrative Controls Cryogenic Deep cut Dehydration Dewpoint Direct Fired Heater Efficiency Engineering, Procurement, and Construction (EPC EPF EPFC) Engineers and Geoscientists of British Columbia (EGBC) Ethane Exchanger Design and Rating Expander-Compressor Fabricator Flare Flarenet Fractionation or Distillation Gas Subcooled Process (GSP) Heat Medium Heat recovery Hot Oil hydrocarbon Hydrogen Sulphide or Sulfide HYSYS International Joule-Thomson (J-T JT) Liquified Petroleum Gas (LPG) Manufacturing Methane Molecular Sieve Natural Gas Liquids (NGL) Natural Gas Processing Oil & Gas Oilfield Equipment Original Equipment Manufacturer (OEM) Plate Fin Heat Exchanger Pressure Relief System Pressure Safety Valve (PSV) Pressure Vessel Process Engineering Process Intensification Process Optimization Process Selection Professional Engineer (P.Eng.) ProMax Propane Recovery Reciprocating Compressor Recycle Split Vapor (RVS) Salary Seperator Shell and Tube Heat Exchanger Single Column Overhead Recycle Start-up and Commissioning Sweetening the Association of Professional Engineers and Geoscientists of Alberta (APEGA) Treating Tri ethylene Glycol (TEG) Troubleshoot Turbo-Expander UltraTEF Utilities VMGSim or Symmetry Y Grade Turnkey or Turn-Key Control Valve Filtration Process Flow Diagram (PFD) Mechanical Flowsheet (MFS) Process and Instrument Diagram (P&ID) Material Selection Diagram (MSD) Heat and Material Balance or Mass Balance (H&MB or HMB) Design Basis Memorandum Datasheets API-521 API-520 ASME B31.3 API-610, API-682 Stream Assisted Gravity Drainage (SAGD) Central Processing Facility Greenfield Brownfield Quotation (RFQ) Cost Estimate Lead Column or Tower Mass Transfer
Journal
Visible seulement par vous. Conservé sur cet appareil, et dans votre compte une fois connecté.