Connexion Inscription gratuite
Postuler

Publié il y a 6 jours

Project Engineer

@ Kelly

Toutes ses offres

Niagara Falls, Ontario

Contrat
Postuler
SIGNAUX

En bref

Kelly is hiring a Project Engineer on a 12-month contract with possible extension in Niagara Falls, ON. The role leads project scope, cost-benefit analysis, design, implementation and support, manages projects to deadlines and budgets, and supervises field construction with safety responsibility. Preferred experience includes chemical or manufacturing facilities handling hazardous materials and DCS integration.

Responsabilités :

  • Lead project scope, design, implementation and support
  • Prepare cost estimates, schedules, execution plans and risk registers
  • Manage projects to budget and deadlines with stakeholders
  • Supervise field construction and contractors safely
  • Hand over completed projects with final documentation

Résumé des exigences :

  • Experience with chemical or manufacturing projects handling hazardous materials
  • Familiarity with WHMIS
  • Experience with batch and continuous process environments
  • Experience with DCS-integrated manufacturing systems
  • Experience with commissioning and Process Safety Management

Outils et compétences

DCS
Source et dates

Type de source non vérifié · apify-linkedin

Date publiée par l’employeur
2026-11-04
Première détection par notre source
2026-11-10
Mise à jour du dossier source
2026-11-10

Ces dates décrivent le dossier source, pas une vérification en direct du recrutement. Consultez l’offre originale.

Détails du poste

NiveauIntermédiaire
DomaineGénie
Déplacementsavion : aucun · route : minimes
Milieu de travailUsine, Chantier, Bureau
PositionAssis et debout
Exigences physiquesphysique modéré · ordinateur modéré
LanguesEnglish
Permis et certificationsWHMIS

Résumé et détails rédigés par l’IA à partir de l’offre; l’offre de l’employeur fait foi.

Postuler
ChampValeur
Offres sur Jobsy8
Description

12 months contract with possible extension

Location: Niagara Falls, ON

Responsibilities:

  • Lead and coordinate scope definition, cost-benefit analysis, design, testing, implementation, and support.
  • Evaluate alternative solutions to identified problems and prepare associated assessment-grade cost estimates.
  • Complete or oversee detailed process and other engineering design work.
  • Prepare project-planning packages to support funding requests, including:
  • Definition-phase cost estimates
  • Resource-loaded project schedules
  • Project execution plans
  • Project risk registers
  • Appropriate safety and hazard reviews
  • Project Execution and Management
  • Manage projects within established deadlines and budgets, partnering with key stakeholders to execute project plans.
  • Ensure workstreams and functions understand Business Readiness stage-gate deliverables.
  • Coordinate change management and employee engagement, including business-process redesign and training.
  • Keep management informed of project status through ongoing communication and presentations.
  • Support company and corporate projects or initiatives by providing business-process knowledge, facilitation, leadership, and system-development experience.
  • Advocate for projects through funding approval and manage procurement and contracting.
  • Lead project execution, including field supervision of construction activities, while ensuring safe work practices for contractors and field personnel.
  • Ensure completed projects are properly handed over to the operating unit, and final documentation is completed.
  • Own assigned projects and deliver the agreed scope on time and within budget, with no safety or environmental incidents.
  • Propose manufacturing processes or utility systems upgrades and operational improvements as part of annual capital budgeting.
  • Preferred Candidate Experience
  • Completed projects in chemical processing or manufacturing facilities handling hazardous materials, including corrosives, flammables, and pyrophorics—for example, oil and gas, petrochemical, or chemical facilities.
  • Familiarity with the Workplace Hazardous Materials Information System (WHMIS).
  • Experience in both batch and continuous chemical-process environments.
  • Experience implementing projects where manufacturing systems interface with a Distributed Control System (DCS).
  • Direct supervision of contractors across disciplines during project work in an operating chemical manufacturing facility.
  • Experience starting up and commissioning new systems or units after project completion.
  • Experience in process design or supervision, and implementing Process Safety Management requirements or recommendations arising from Process Hazard Analyses.

Emplois semblables

  • Senior Project Engineer - Capital Projects

    Toronto, ON
    Temps plein

    Give and Go Prepared Foods

    6+ ansCandidates need an engineering degree, ideally mechanical or electrical, and about 6+ years of capital project experience. Strong food, beverage or high-volume manufacturing project execution, equipment commissioning and stakeholder communication skills are also required.

    Collaboration, Personal care, Communication skills, Stakeholder management, P.Eng.

  • Project Engineer

    Oakville, ON
    Hybride

    SPECTRAFORCE

    5+ ansCandidates need a bachelor's degree in chemical, mechanical or a related technical discipline and 5 or more years of engineering experience. Strong mechanical aptitude, attention to detail, and the ability to read P&IDs and PFDs are important, along with clear technical writing and communication.

    P&ID, PFD

  • Senior Project Engineer, Thermal Power Generation

    Calgary, AB +6
    Temps plein

    WSP

    6+ ansCandidates need a relevant engineering bachelor's degree, a P.Eng. registration in Canada, and 6 to 10 years of progressive engineering experience. Project engineering experience on power, energy, or industrial projects and knowledge of Canadian codes are required.

  • Project Engineer

    Tiverton, ON

    Tetra Tech

    Candidates need an engineering degree in mechanical, electrical, civil/structural or nuclear, plus PEO registration or EIT status. Federal security clearance, a G2/G driver's licence and strong leadership and communication skills are also required.

    Procurement, P.Eng., EIT, Leadership, Communication skills, Interpersonal skills

  • Project Engineer - Drainage

    Peterborough, ON
    75k–110k $/anHybrideTemps plein

    D.M. Wills Associates Limited

    5+ ansCandidates need a Bachelor's degree in Civil Engineering, a P.Eng. with Professional Engineers Ontario, and at least 5 years of civil drainage or transportation experience. Experience with MTO or municipal projects, hydrologic and hydraulic analysis, and software such as HEC-RAS, HY-8 or AutoCAD Civil 3D is required.

    HEC-RAS, HY-8, HEC-SSP, Visual OTTHYMO, AutoCAD Civil 3D, ArcMap

    Project Engineer, Land Development Engineering

    Peterborough, ON
    HybrideTemps plein

    D.M. Wills Associates Limited

    5+ ansCandidates need a Professional Engineer (P.Eng.) designation with Professional Engineers Ontario and at least 5 years of civil engineering experience, ideally in consulting or land development. Strong knowledge of Ontario municipal standards and approvals, AutoCAD or Civil 3D, and clear English communication is required.

    AutoCAD, AutoCAD Civil 3D, Visual OTTHYMO, EPA SWMM, HY-8, Microsoft Word

  • Project Engineer / Project Coordinator - Nuclear & Renewables Projects

    Toronto, ON
    100k–130k $/anTemps plein

    AtkinsRéalis

    1+ ansCandidates need three to eight years of engineering or project experience, or one to five years for the coordinator level. They should have exposure to multidisciplinary industrial, infrastructure or energy projects, strong organizational skills and attention to detail.

    Procurement, Documentation, Attention to detail, Communication skills, Reporting

  • Project Engineer

    Mississauga, ON
    Temps plein

    Bora Pharmaceuticals Services Inc

    3+ ansCandidates need a B.Sc. in Engineering, with a P.Eng licence or the ability to obtain one, and at least 3 years of related experience. Strong project management, contractor management, problem-solving and knowledge of Good Manufacturing Practices are required.

    Quality assurance, Procurement, Project management principles, P.Eng., Building codes, Problem solving

Lieux et modes de travail

Lieux

Tout le CanadaTélétravail · Hybride · Sur place · Sur le terrain

Astuce : ajoutez le télétravail pour élargir la recherche.

Exclure des lieux

Mode de travail

Offres de cette entreprise dans les résultats

Voici les offres de cette entreprise chargées dans votre recherche. Elle peut avoir d’autres postes ouverts.