Postuler

Publié hier

Repair and Overhaul Technician

@ Airbus Helicopters Canada Ltd

Fort Erie, Ontario

Temps plein2+ ans d’expérience
Postuler
SIGNAUX

En bref

Airbus Helicopters Canada is hiring a Repair and Overhaul Technician in Fort Erie, Ontario, for full-time work. The role covers disassembly, visual dimensional inspection, assembly preparation and assembly of aircraft components, including documentation, NDT paperwork and dynamic testing. Two years of hand-tool experience in a mechanical or machining setting is required.

Responsabilités :

  • Inspect and document incoming components, paperwork and life limits
  • Disassemble, clean and perform visual dimensional inspection of components
  • Prepare parts and paperwork for NDT, machining and vendor repairs
  • Assemble, test and prepare components for return to customers

Résumé des exigences :

  • High school diploma required
  • Two years of hand-tool experience in mechanical or machining
  • Aircraft maintenance college diploma an asset
  • Experience with Airbus products an asset
  • Knowledge of Canadian aviation regulations and maintenance management

Outils et compétences

Source et dates

Site carrière / système de candidatures · workday

Date publiée par l’employeur
2026-11-15
Première détection par notre source
2026-11-16
Mise à jour du dossier source
2026-11-16

Ces dates décrivent le dossier source, pas une vérification en direct du recrutement. Consultez l’offre originale.

Détails du poste

NiveauDébutant
DomaineFabrication et production
Expérience2 an(s) et plus
Heures par semaine40 (estimé)
Déplacementsavion : aucun · route : aucun
Milieu de travailUsine
PositionAssis et debout
Exigences physiquesphysique modéré · soulever 60 lb · ordinateur faible
LanguesEnglish
FormationSecondaire (DES) (exigé), Collégial (DEC) (préféré)
Domaines d’étudesAircraft Maintenance Technology

Résumé et détails rédigés par l’IA à partir de l’offre; l’offre de l’employeur fait foi.

Airbus Helicopters Canada Ltd

ChampValeur
Offres sur Jobsy12
Description

Job Description:

WE’RE LOOKING FOR A REPAIR AND OVERHAUL TECHNICIAN

POSITION LOCATION: FORT ERIE, ONTARIO

The Repair and Overhaul Technician is responsible for completing initial assessment and paperwork of incoming components and expediting the completion of repair and overhaul work while ensuring on time, on cost, and on quality. The Repair and Overhaul Technician adheres to internal and external standards and regulations with regards to the maintenance, repair and overhaul of the components and all associated paperwork.

MAIN RESPONSIBILITIES

Disassembly

  • Review documentation to ensure the information populated is accurate, complete and signed to the applicable stage in the QG2 where component is stationed. Complete visual inspection of component to ensure no additional damage has occurred
  • Maintain established activity log and OJT records simultaneously
  • Maintain 5S standard within the workspace and tool chest assigned at the time
  • Review Repair & Overhaul manuals to ensure understanding of cycle limits, life limits and calendar limits are reached for each unit
  • Perform “tear down” of components utilizing a variety of tools in accordance to the standards and regulations set within the dept.
  • Actively partake in ensuring tools and equipment used in disassembly are maintained according to shop standards
  • Perform “cleaning” of components with varsol, plastic media blasting and ultrasonic methods while ensuring proper areas are sealed and machined surfaces are not damaged
  • Complete forms required for NDT ensuring accuracy and attention to detail when transferring component P/N, S/N and type of non-destructive testing required
  • Ensure all paperwork is signed by the responsible stakeholders at the end of disassembly and update the IObeya visual management board

Visual Dimensional Inspection (VDI)

  • Review documentation to ensure the information populated is accurate, complete and signed to the applicable stage in the QG2 where component is stationed. Complete visual inspection of component to ensure no additional damage has occurred
  • Maintain established activity log and OJT records simultaneously
  • Maintain 5S standard within the workspace and tool chests assigned at the time
  • Retrieve all manuals required to inspect the specific component and review all ASB, SB, SL and any other documents impacting final certification
  • Inspect all components as per the MRV's i.e. visual and dimensional inspection using special measuring tools and surface tables
  • During inspection, determine and document which components have fulfilled their life cycle, time expiration (SLL reached), severe damage, and required repairs
  • Utilize various measuring tools to complete inspection i.e. height gauges, inside / outside micrometers, bore gauges etc.
  • Complete forms for “Exploratory Machining” accurately and communicate with external vendors when required
  • Actively partake in ensuring tools and equipment used in disassembly are maintained according to shop standards
  • Ensure all inspection findings are documented in accordance with internal processes of QG2
  • Ensure all corrosion sensitive parts are protected by VCI bagging and using sealants in preparation of component storage
  • Ensure all paperwork is signed by the responsible stakeholders at the end of VDI and update the IObeya visual management board

Flux – Assembly Preparation

  • Review documentation to ensure the information populated is accurate, complete and signed to the applicable stage in the QG2 where component is stationed. Complete visual inspection of component to ensure no additional damage has occurred
  • Maintain established activity log and OJT records simultaneously
  • Maintain 5S standard within the workspace and tool chests assigned at the time
  • Complete all paperwork, pre and post-cleaning for parts requiring NDT/Painting/Machining as required
  • Assess repairs and prepare necessary paperwork for components being sent to internal/external vendors
  • Actively partake in ensuring tools and equipment used in disassembly are maintained according to shop standards
  • Verify parts required for final assembly and collaborate with Production Planning to expedite any missing components
  • Complete corresponding QA forms for scrapped components and ensure scrapped corrosion sensitive parts are protected by bagging/sealants to mitigate further deterioration
  • Itemize all serviceable parts for return and ensure documentation is complete and accurate for customer returns
  • Ensure all paperwork is signed by the responsible stakeholders at the end of Flux and update the IObeya visual management board

Assembly

  • Review documentation to ensure the information populated is accurate, complete and signed to the applicable stage in the QG2 where component is stationed. Complete visual inspection of component to ensure no additional damage has occurred
  • Review paperwork completed in previous stages and verify contents are complete/accurate and processes/standards were followed
  • Maintain established activity log and OJT records simultaneously
  • Maintain 5S standard within the workspace and tool chests assigned at the time
  • Unpack new parts and verify that all documents match P/N's and S/N's and quantities ordered vs received
  • Document all new and serviceable serialized parts on appropriate forms within the work package and index
  • Assemble components in accordance to internal and external processes, standards and regulations (AH, TCCA, MRV, etc.) utilizing various tools and measuring equipment
  • Complete dynamic testing checking for leaks, metallic build up, oil pressures within tolerance and proper heat cycles
  • Prepare final assembled and tested unit for return shipment to customer
  • Ensure all paperwork is signed by the responsible stakeholders at the end of Assembly and update the IObeya visual management board

MINIMUM JOB REQUIREMENTS

  • High school diploma
  • College diploma in Aircraft Maintenance Technology or related field an asset
  • 2 years’ experience working with hand tools in a mechanical/machining environment
  • Experience with Airbus products, documentation and/or dynamic components an asset
  • Competent in and familiar with Aircraft Maintenance Management (i.e. TBO, SLL (Service Life Limits)), Schedule Maintenance and Canadian Aviation Regulations
  • Familiar and experienced in the use of various hand tools
  • Able to take independent action and problem solving; able to solve day-to-day issues and work under general supervision
  • Critical thinking skills; able to troubleshoot and identify issues and take corrective measures
  • Basic computer skills including familiarity with Microsoft & Google Applications
  • Strong attention to detail
  • Excellent organizational skills and ability to handle multiple priorities to meet deadlines
  • Strong customer focus
  • Ability to interpret technical manuals and documents
  • Knowledge of tools used in aircraft repair applications considered an asset
  • Ability to calculate and derive basic arithmetic formulas
  • Solid ability to complete tasks requiring high degrees of manual dexterity and precision
  • Focus on delivering high standards of product quality
  • Ability to demonstrate flexibility in the day to day operational changes in work scope

PHYSICAL REQUIREMENTS

The Repair and Overhaul Technician’s job responsibilities and tasks are all performed indoors. Due to the nature of this position, they may be exposed to awkward body positions at times. For the most part of the day, the incumbent in this position will experience twisting/bending of the back, knees, elbows, and wrists with frequent standing and sitting and occasional lifting/carrying (20 lbs. to 60 lbs.) using floor to waist movements. Constant use of hands/fingers as many of the job activities involve applying pressure, gripping and pinching, repetitious movements, using non powered/powered hand tools, and finger dexterity and precision tasks. Other hazards include exposure to industrial chemicals, oil and grease, hot surfaces, dust and irritants, industrial machinery/equipment, and sharp objects such as knives and blades.

Other Information:

WE’RE LOOKING FOR A REPAIR AND OVERHAUL TECHNICIAN

POSITION LOCATION: FORT ERIE, ONTARIO

The Repair and Overhaul Technician is responsible for completing initial assessment and paperwork of incoming components and expediting the completion of repair and overhaul work while ensuring on time, on cost, and on quality. The Repair and Overhaul Technician adheres to internal and external standards and regulations with regards to the maintenance, repair and overhaul of the components and all associated paperwork.

MAIN RESPONSIBILITIES

Disassembly

  • Review documentation to ensure the information populated is accurate, complete and signed to the applicable stage in the QG2 where component is stationed. Complete visual inspection of component to ensure no additional damage has occurred
  • Maintain established activity log and OJT records simultaneously
  • Maintain 5S standard within the workspace and tool chest assigned at the time
  • Review Repair & Overhaul manuals to ensure understanding of cycle limits, life limits and calendar limits are reached for each unit
  • Perform “tear down” of components utilizing a variety of tools in accordance to the standards and regulations set within the dept.
  • Actively partake in ensuring tools and equipment used in disassembly are maintained according to shop standards
  • Perform “cleaning” of components with varsol, plastic media blasting and ultrasonic methods while ensuring proper areas are sealed and machined surfaces are not damaged
  • Complete forms required for NDT ensuring accuracy and attention to detail when transferring component P/N, S/N and type of non-destructive testing required
  • Ensure all paperwork is signed by the responsible stakeholders at the end of disassembly and update the IObeya visual management board

Visual Dimensional Inspection (VDI)

  • Review documentation to ensure the information populated is accurate, complete and signed to the applicable stage in the QG2 where component is stationed. Complete visual inspection of component to ensure no additional damage has occurred
  • Maintain established activity log and OJT records simultaneously
  • Maintain 5S standard within the workspace and tool chests assigned at the time
  • Retrieve all manuals required to inspect the specific component and review all ASB, SB, SL and any other documents impacting final certification
  • Inspect all components as per the MRV's i.e. visual and dimensional inspection using special measuring tools and surface tables
  • During inspection, determine and document which components have fulfilled their life cycle, time expiration (SLL reached), severe damage, and required repairs
  • Utilize various measuring tools to complete inspection i.e. height gauges, inside / outside micrometers, bore gauges etc.
  • Complete forms for “Exploratory Machining” accurately and communicate with external vendors when required
  • Actively partake in ensuring tools and equipment used in disassembly are maintained according to shop standards
  • Ensure all inspection findings are documented in accordance with internal processes of QG2
  • Ensure all corrosion sensitive parts are protected by VCI bagging and using sealants in preparation of component storage
  • Ensure all paperwork is signed by the responsible stakeholders at the end of VDI and update the IObeya visual management board

Flux – Assembly Preparation

  • Review documentation to ensure the information populated is accurate, complete and signed to the applicable stage in the QG2 where component is stationed. Complete visual inspection of component to ensure no additional damage has occurred
  • Maintain established activity log and OJT records simultaneously
  • Maintain 5S standard within the workspace and tool chests assigned at the time
  • Complete all paperwork, pre and post-cleaning for parts requiring NDT/Painting/Machining as required
  • Assess repairs and prepare necessary paperwork for components being sent to internal/external vendors
  • Actively partake in ensuring tools and equipment used in disassembly are maintained according to shop standards
  • Verify parts required for final assembly and collaborate with Production Planning to expedite any missing components
  • Complete corresponding QA forms for scrapped components and ensure scrapped corrosion sensitive parts are protected by bagging/sealants to mitigate further deterioration
  • Itemize all serviceable parts for return and ensure documentation is complete and accurate for customer returns
  • Ensure all paperwork is signed by the responsible stakeholders at the end of Flux and update the IObeya visual management board

Assembly

  • Review documentation to ensure the information populated is accurate, complete and signed to the applicable stage in the QG2 where component is stationed. Complete visual inspection of component to ensure no additional damage has occurred
  • Review paperwork completed in previous stages and verify contents are complete/accurate and processes/standards were followed
  • Maintain established activity log and OJT records simultaneously
  • Maintain 5S standard within the workspace and tool chests assigned at the time
  • Unpack new parts and verify that all documents match P/N's and S/N's and quantities ordered vs received
  • Document all new and serviceable serialized parts on appropriate forms within the work package and index
  • Assemble components in accordance to internal and external processes, standards and regulations (AH, TCCA, MRV, etc.) utilizing various tools and measuring equipment
  • Complete dynamic testing checking for leaks, metallic build up, oil pressures within tolerance and proper heat cycles
  • Prepare final assembled and tested unit for return shipment to customer
  • Ensure all paperwork is signed by the responsible stakeholders at the end of Assembly and update the IObeya visual management board

MINIMUM JOB REQUIREMENTS

  • High school diploma
  • College diploma in Aircraft Maintenance Technology or related field an asset
  • 2 years’ experience working with hand tools in a mechanical/machining environment
  • Experience with Airbus products, documentation and/or dynamic components an asset
  • Competent in and familiar with Aircraft Maintenance Management (i.e. TBO, SLL (Service Life Limits)), Schedule Maintenance and Canadian Aviation Regulations
  • Familiar and experienced in the use of various hand tools
  • Able to take independent action and problem solving; able to solve day-to-day issues and work under general supervision
  • Critical thinking skills; able to troubleshoot and identify issues and take corrective measures
  • Basic computer skills including familiarity with Microsoft & Google Applications
  • Strong attention to detail
  • Excellent organizational skills and ability to handle multiple priorities to meet deadlines
  • Strong customer focus
  • Ability to interpret technical manuals and documents
  • Knowledge of tools used in aircraft repair applications considered an asset
  • Ability to calculate and derive basic arithmetic formulas
  • Solid ability to complete tasks requiring high degrees of manual dexterity and precision
  • Focus on delivering high standards of product quality
  • Ability to demonstrate flexibility in the day to day operational changes in work scope

This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.

Company:

Airbus Helicopters Canada Ltd

Employment Type:

Permanent

-------

Experience Level:

Professional

Job Family:

Dynamic component assembly <JF-MA-DC>

By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.
Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.

Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to [email protected].

At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Emplois semblables

  • Repair and Overhaul Technician

    Charlottetown, PE
    23–35 $/hTemps plein

    Action Aero Inc.

    Candidates need a Grade 12 education, the ability to read technical documents and do basic math, and comfort working by hand in a factory setting. Aerospace background is an asset, as is Holland College training, and they must be a Canadian citizen or permanent resident.

    Cleaning, Inspection, Assembly, Troubleshoot, Complete administration, Quality assurance

  • Retail Sales Associate

    Fort Erie, ON
    17,95 $/hTemps partiel

    Canna Cabana

    2+ ansCandidates need a Cannabis Retail Certification (CannSell), a clean criminal background check, and 2-3 years of retail sales and customer service experience. Strong communication skills, attention to detail and basic math are also required.

  • Sewer Inspection Operator CCTV

    Fort Erie, ON
    Temps plein

    Ontario Utilivac and Infrastructure Group

    Candidates need a valid driver's licence with a clean record, high school or equivalent, and the ability to learn CCTV inspection systems and software. They must work outdoors in all weather, stand or walk for long periods, and follow safety procedures.

    CCTV inspection camera, inspection truck, inspection software

  • Finance Manager

    Fort Erie, ON
    Temps partiel

    Community Living - Fort Erie

    5+ ansCandidates need a university degree, college diploma or equivalent in accounting, finance or business, with a CPA designation strongly preferred. At least five years of progressive accounting and finance experience is required, including supervisory experience.

  • Customer Service Representative

    Fort Erie, ON
    Temps plein

    Desjardins Insurance

    Candidates need strong customer service, communication and problem-solving skills, and the ability to multitask in a fast-paced setting. Insurance or financial services experience is an asset.

  • Operations Supervisor

    Fort Erie, ON
    Temps plein

    NPAworldwide

    5+ ans5+ gestionCandidates need at least five years of supervisory or operations management experience, preferably in a unionized, service-oriented setting, plus an associate degree or higher in business or operations, or an equivalent combination of education and experience. A valid driver's licence and proficiency in Microsoft Office and scheduling, timekeeping and payroll systems are also required.

    Microsoft Office, scheduling systems, timekeeping systems, payroll systems

  • (CAN) OMNI Customer Fulfillment Associate

    Fort Erie, ON
    Temps partiel

    Wal-Mart Canada Corp

    Candidates need to be at least 16 years old and willing to work a variety of shifts, including evenings, weekends and holidays. Experience in a fast-paced retail or food environment, with attention to accuracy, food hygiene and safety, is an asset.

    Pick slips, Shipping labels, Totes, Lift equipment

  • Paint Manufacturing Production Operator

    Fort Erie, ON

    Sherwin-Williams

    Candidates need to be at least 18 and legally allowed to work in Canada. Preferred experience includes one year or more in manufacturing or distribution, operating machinery, monitoring gauges, packaging equipment and material handling equipment such as forklifts and pallet jacks.

    High-speed disperser, Filling machine, Case packer, Robotics, Forklift, Pallet jack

Lieux et modes de travail

Lieux

Tout le CanadaTélétravail · Hybride · Sur place · Sur le terrain

Astuce : ajoutez le télétravail pour élargir la recherche.

Exclure des lieux

Mode de travail

Offres de cette entreprise dans les résultats

Voici les offres de cette entreprise chargées dans votre recherche. Elle peut avoir d’autres postes ouverts.