Publié il y a 2 mois
Senior Embedded Software Engineer
@ Corinex Communications
Vancouver, Colombie-Britannique
En bref
Corinex Communications is hiring a Senior Embedded Software Engineer to develop Linux-based smart grid communication devices. The role covers board bring-up, BSP and kernel driver work, and debugging from prototype through production. It is a full-time position with 5+ years of embedded Linux experience required.
Responsabilités :
- Develop and maintain embedded Linux software, BSPs and kernel drivers
- Perform new board bring-up and hardware-software integration
- Debug systems using JTAG, UART, GDB and OpenOCD
- Support manufacturing, factory flashing and production testing
- Mentor junior engineers
Résumé des exigences :
- 5+ years embedded software or embedded Linux experience
- Strong C programming and low-level concepts
- Experience with U-Boot and Device Tree
- Experience with board bring-up and hardware schematics
- Git-based version control
Outils et compétences
Source et dates
Site carrière / système de candidatures · bamboohr
- Date publiée par l’employeur
- 2026-08-25
- Première détection par notre source
- 2026-10-08
- Mise à jour du dossier source
- 2026-10-09
Ces dates décrivent le dossier source, pas une vérification en direct du recrutement. Consultez l’offre originale.
Détails du poste
| Niveau | Senior |
| Domaine | Développement logiciel |
| Expérience | 5 an(s) et plus |
| Heures par semaine | 40 (estimé) |
| Milieu de travail | Laboratoire, Bureau |
| Position | Assis et debout |
| Exigences physiques | physique faible · ordinateur élevé |
| Langues | English |
| Formation | Baccalauréat (exigé) |
| Domaines d’études | Electrical Engineering, Computer Engineering, Computer Science |
Résumé et détails rédigés par l’IA à partir de l’offre; l’offre de l’employeur fait foi.
Corinex Communications
| Champ | Valeur |
|---|---|
| Offres sur Jobsy | 4 |
About The Company
At Corinex, we are driving the future of energy with cutting-edge Broadband over Power Line (BPL) technology. As a global leader in smart grid solutions, we enable utilities to enhance grid visibility, flexibility, and decarbonization, supporting the seamless integration of renewable energy, electric vehicles, and heat pumps into the power grid.
Headquartered in Vancouver, Canada, Corinex is the market leader in Europe, particularly in Spain, where our BPL solutions are deployed by major DSOs (Distribution System Operators) to improve grid operations. With successful implementations across global markets, our technologies accelerate the transition to a more sustainable, decentralized, and efficient energy infrastructure. Recognized as a key contributor to industry standards and a 2024 Deloitte Technology Fast 50 winner, Corinex is shaping the future of smart energy.
About the Job
Corinex is seeking an experienced Senior Embedded Software Engineer to join our engineering team in developing next-generation smart grid communication devices. In this role, you will work on low-level embedded software and platform development across the full product lifecycle, from board bring-up and BSP development to system integration, debugging, validation, and production support.
The ideal candidate has strong hands-on experience with Embedded Linux, C programming, Linux kernel and device drivers, BSP development, bootloaders, and hardware bring-up. You will work closely with hardware, firmware, networking, and test teams to develop reliable and high-performance embedded platforms for our smart grid communication products.
This is a hands-on engineering role suited for someone comfortable working close to the hardware, debugging complex system-level issues, and taking ownership of embedded platforms from initial board bring-up through production deployment.
Duties & Responsibilities
- Design, develop, integrate, and maintain embedded software for Linux-based communication devices.
- Develop and maintain Board Support Packages (BSPs), platform software, and low-level firmware components.
- Perform new board bring-up, hardware-software integration, and system-level debugging.
- Develop, configure, and maintain Linux kernel components and device drivers.
- Configure and maintain U-Boot, bootloaders, Device Tree (DTS/DTB), and Linux kernel configurations.
- Debug hardware and embedded software using tools and interfaces such as JTAG, UART/serial console, GDB, and OpenOCD.
- Investigate and resolve system-level issues involving hardware, firmware, kernel, drivers, and networking.
- Work with embedded interfaces and peripherals including SPI, I²C, GPIO, UART, and Ethernet.
- Support embedded networking functionality, including troubleshooting Ethernet, VLAN/bridge configuration, IP addressing and routing, TCP/UDP, multicast, and network management protocols.
- Develop and maintain Embedded Linux builds using technologies such as Yocto Project, OpenEmbedded, and BitBake.
- Collaborate closely with hardware engineers during schematic review, board validation, and product bring-up.
- Perform structured root-cause analysis and troubleshoot complex hardware-software integration issues.
- Participate in system architecture and technical design discussions.
- Develop scripts and automation tools to support build, validation, flashing, testing, and manufacturing processes.
- Contribute to CI/CD pipelines and automated hardware or firmware testing.
- Conduct code reviews and contribute to engineering best practices, coding standards, and technical documentation.
- Support manufacturing, factory flashing, recovery tooling, and production testing when required.
- Mentor junior engineers and provide technical guidance on embedded software development and debugging.
Qualifications
- Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, Computer Science, or a related technical field.
- 5+ years of professional experience in embedded software, firmware, or Embedded Linux development.
- Strong programming experience in C, with solid understanding of low-level programming concepts.
- Strong hands-on experience developing software for Embedded Linux systems.
- Experience with Linux kernel development, BSP development, and/or Linux device drivers.
- Proven experience with board bring-up and hardware-software integration.
- Hands-on experience with U-Boot or other bootloaders and Device Tree configuration.
- Strong experience debugging embedded systems through UART/serial console and JTAG.
- Experience working directly with hardware, schematics, processors, peripherals, and board-level interfaces.
- Strong understanding of embedded communication interfaces such as SPI, I²C, UART, GPIO, and Ethernet.
- Strong troubleshooting skills and ability to perform structured root-cause analysis across hardware and software layers.
- Proficiency with Git-based version control and modern software development practices.
Nice to Have
- Experience with Yocto Project, OpenEmbedded, and/or BitBake.
- Experience with Ethernet or networking driver development.
- Strong understanding of networking concepts including TCP/IP, UDP, VLANs, bridges, routing, multicast, and network management protocols.
- Experience using OpenOCD, GDB, or similar low-level debugging tools.
- Experience with factory flashing, firmware recovery, and production tooling.
- Experience scripting in Python or Shell.
- Experience with CI/CD and automated hardware or firmware testing.
- Experience supporting manufacturing or production test environments.
- Experience with C++, bare-metal firmware, or RTOS-based systems.
- Experience with embedded communication, telecommunications, networking equipment, industrial networking, or smart grid technologies is an asset.
Journal
Visible seulement par vous. Conservé sur cet appareil, et dans votre compte une fois connecté.