Oversight Electrical Engineer Senior IV

High-Level Description

We are seeking a highly skilled and experienced Senior Oversight Electrical Engineer to oversee engineering and design aspects of utility-scale solar and wind projects in the USA and Canada. The successful candidate will be responsible for reviewing and managing EPC contractor’s engineering packages (IFR and IFC) and ensuring compliance with project requirements, industry standards, and interconnection regulations. Additionally, this role involves evaluating high-voltage (HV) substation and PV/Wind plant designs, overseeing interconnection studies, and providing technical leadership throughout the project lifecycle.

Knowledge, Skills & Abilities

Required:

10+ years of experience in electrical engineering system design and commissioning activities, including a minimum of 3 years in renewable energy projects (solar, wind, HV substations, BESS and grid interconnection).
Bachelor’s or Master’s degree in Electrical engineering.

Professional Engineer designation with APEGA or equivalent, or eligibility to register.

In-depth knowledge of HV substations (34.5kV – 345kV), PV or wind plant electrical systems, power system analysis, and protection & control schemes.
Strong understanding of grid interconnection processes and utility-scale renewable energy integration.

Effective and professional interpersonal skills, both verbal and written.
Strong facilitation, collaboration, and negotiation skills to influence and drive-forward results and decisions without formal authority.

Role requires a valid driver’s license, which will be verified with a motor vehicle check prior to hire.

Preferred:

Familiarity with SCADA, RTUs, and communication protocols (DNP3, Modbus, IEC 61850)

Experience with cable heating, AC/DC cable losses, transient recovery voltage (TRV), insulation coordination, grounding, load flow, short circuit, and transformer energization studies

Experience with power system analysis and modeling software tools (e.g., PSS/E, ETAP, PSCAD, SKM)

Office environment - hybrid (office and home as per Enbridge schedule)
10% travel which will include overnight business trips to the field or vendor shop may be required, requires Personal Protective Equipment (PPE).

Specific Accountabilities

Lead the review of EPC contractor's engineering and design packages (IFR and IFC) for accuracy, completeness, and compliance with applicable codes (NEC, NESC, IEEE, NFPA, etc.) Provide technical feedback and coordinate design refinements with EPCs and stakeholders.

Assess HV substation and PV plant electrical designs, including substation general arrangements, one-line diagrams, grounding, protection schemes, and relay coordination studies.

Ensure proper integration of MV and HV equipment, including main power transformers (MPTs), inverters, switchgear, and circuit breakers.

Ensure adherence to industry standards, including IEEE, UL, CAS, NFPA, NESC, and NEC.

Evaluate design risks and recommend cost-effective engineering solutions.
Collaborate with EPC teams to ensure comprehensive documentation is submitted to regulatory bodies (e.g., ERCOT, FERC, NERC), demonstrating compliance with operational and interconnection standards. Work closely with regulatory teams to ensure all electrical interconnection implementations meet local, state, and federal regulations.

Accountable to the preparation of and detailed engineering construction drawings within assigned area ensuring efficient and functional designs. Ensure adequate information is provided to enable cost effective construction of Solar/Wind facilities;

Accountable to ensure design compliance with project procedures, design standards (including providing recommendations for improvements), regulatory, environmental, health and safety requirements.

Participates in design review meetings to ensure consistency in the scope, design and expected performance. Follows applicable design review procedures
Lead the specification and requisition of materials by reviewing vendor materials quotations, performing technical bid evaluations and providing recommendations based on technical merit. Collaborate with Supply Chain to procure material via internal tools.

Provide technical support during all project phases, including project development, detailed design, construction, commissioning, close out.

Provide technical guidance during construction, addressing engineering-related RFIs and field modifications.

Support the commissioning and testing of HV substations and PV/wind plant electrical systems, and protection systems.

Participate and witness the factory acceptance tests (FATs) and site acceptance tests (SATs) for major electrical equipment as required.

Responsible for the successful operations of the assigned area with significant corporate financial impact.

Oversees the development and/or implementation of technical solutions, ensuring efficient coordination of technical resources and with other internal and external stakeholders.

Scope/Dimension:

Responsible for the successful operations of the assigned area with significant corporate financial impact.

Oversees the development and/or implementation of technical solutions, ensuring efficient coordination of technical resources and with other internal and external stakeholders.

Provides informal leadership to peers

Please apply in confidence to [email protected]

Advantages
In-depth knowledge of HV substations (34.5kV – 345kV), PV or wind plant electrical systems, power system analysis, and protection & control schemes.
Strong understanding of grid interconnection processes and utility-scale renewable energy integration.

Responsibilities
High-Level Description

We are seeking a highly skilled and experienced Senior Oversight Electrical Engineer to oversee engineering and design aspects of utility-scale solar and wind projects in the USA and Canada. The successful candidate will be responsible for reviewing and managing EPC contractor’s engineering packages (IFR and IFC) and ensuring compliance with project requirements, industry standards, and interconnection regulations. Additionally, this role involves evaluating high-voltage (HV) substation and PV/Wind plant designs, overseeing interconnection studies, and providing technical leadership throughout the project lifecycle.

Knowledge, Skills & Abilities

Required:

10+ years of experience in electrical engineering system design and commissioning activities, including a minimum of 3 years in renewable energy projects (solar, wind, HV substations, BESS and grid interconnection).
Bachelor’s or Master’s degree in Electrical engineering.

Professional Engineer designation with APEGA or equivalent, or eligibility to register.

In-depth knowledge of HV substations (34.5kV – 345kV), PV or wind plant electrical systems, power system analysis, and protection & control schemes.
Strong understanding of grid interconnection processes and utility-scale renewable energy integration.

Effective and professional interpersonal skills, both verbal and written.
Strong facilitation, collaboration, and negotiation skills to influence and drive-forward results and decisions without formal authority.

Role requires a valid driver’s license, which will be verified with a motor vehicle check prior to hire.

Preferred:

Familiarity with SCADA, RTUs, and communication protocols (DNP3, Modbus, IEC 61850)

Experience with cable heating, AC/DC cable losses, transient recovery voltage (TRV), insulation coordination, grounding, load flow, short circuit, and transformer energization studies

Experience with power system analysis and modeling software tools (e.g., PSS/E, ETAP, PSCAD, SKM)

Office environment - hybrid (office and home as per Enbridge schedule)
10% travel which will include overnight business trips to the field or vendor shop may be required, requires Personal Protective Equipment (PPE).

Specific Accountabilities

Lead the review of EPC contractor's engineering and design packages (IFR and IFC) for accuracy, completeness, and compliance with applicable codes (NEC, NESC, IEEE, NFPA, etc.) Provide technical feedback and coordinate design refinements with EPCs and stakeholders.

Assess HV substation and PV plant electrical designs, including substation general arrangements, one-line diagrams, grounding, protection schemes, and relay coordination studies.

Ensure proper integration of MV and HV equipment, including main power transformers (MPTs), inverters, switchgear, and circuit breakers.

Ensure adherence to industry standards, including IEEE, UL, CAS, NFPA, NESC, and NEC.

Evaluate design risks and recommend cost-effective engineering solutions.
Collaborate with EPC teams to ensure comprehensive documentation is submitted to regulatory bodies (e.g., ERCOT, FERC, NERC), demonstrating compliance with operational and interconnection standards. Work closely with regulatory teams to ensure all electrical interconnection implementations meet local, state, and federal regulations.

Accountable to the preparation of and detailed engineering construction drawings within assigned area ensuring efficient and functional designs. Ensure adequate information is provided to enable cost effective construction of Solar/Wind facilities;

Accountable to ensure design compliance with project procedures, design standards (including providing recommendations for improvements), regulatory, environmental, health and safety requirements.

Participates in design review meetings to ensure consistency in the scope, design and expected performance. Follows applicable design review procedures
Lead the specification and requisition of materials by reviewing vendor materials quotations, performing technical bid evaluations and providing recommendations based on technical merit. Collaborate with Supply Chain to procure material via internal tools.

Provide technical support during all project phases, including project development, detailed design, construction, commissioning, close out.

Provide technical guidance during construction, addressing engineering-related RFIs and field modifications.

Support the commissioning and testing of HV substations and PV/wind plant electrical systems, and protection systems.

Participate and witness the factory acceptance tests (FATs) and site acceptance tests (SATs) for major electrical equipment as required.

Responsible for the successful operations of the assigned area with significant corporate financial impact.

Oversees the development and/or implementation of technical solutions, ensuring efficient coordination of technical resources and with other internal and external stakeholders.

Scope/Dimension:

Responsible for the successful operations of the assigned area with significant corporate financial impact.

Oversees the development and/or implementation of technical solutions, ensuring efficient coordination of technical resources and with other internal and external stakeholders.

Provides informal leadership to peers

Please apply in confidence to [email protected]

Qualifications
10+ years of experience in electrical engineering system design and commissioning activities, including a minimum of 3 years in renewable energy projects (solar, wind, HV substations, BESS and grid interconnection).

Bachelor’s or Master’s degree in Electrical engineering.

Summary
High-Level Description

We are seeking a highly skilled and experienced Senior Oversight Electrical Engineer to oversee engineering and design aspects of utility-scale solar and wind projects in the USA and Canada. The successful candidate will be responsible for reviewing and managing EPC contractor’s engineering packages (IFR and IFC) and ensuring compliance with project requirements, industry standards, and interconnection regulations. Additionally, this role involves evaluating high-voltage (HV) substation and PV/Wind plant designs, overseeing interconnection studies, and providing technical leadership throughout the project lifecycle.

Knowledge, Skills & Abilities

Required:

10+ years of experience in electrical engineering system design and commissioning activities, including a minimum of 3 years in renewable energy projects (solar, wind, HV substations, BESS and grid interconnection).
Bachelor’s or Master’s degree in Electrical engineering.

Professional Engineer designation with APEGA or equivalent, or eligibility to register.

In-depth knowledge of HV substations (34.5kV – 345kV), PV or wind plant electrical systems, power system analysis, and protection & control schemes.
Strong understanding of grid interconnection processes and utility-scale renewable energy integration.

Effective and professional interpersonal skills, both verbal and written.
Strong facilitation, collaboration, and negotiation skills to influence and drive-forward results and decisions without formal authority.

Role requires a valid driver’s license, which will be verified with a motor vehicle check prior to hire.

Preferred:

Familiarity with SCADA, RTUs, and communication protocols (DNP3, Modbus, IEC 61850)

Experience with cable heating, AC/DC cable losses, transient recovery voltage (TRV), insulation coordination, grounding, load flow, short circuit, and transformer energization studies

Experience with power system analysis and modeling software tools (e.g., PSS/E, ETAP, PSCAD, SKM)

Office environment - hybrid (office and home as per Enbridge schedule)
10% travel which will include overnight business trips to the field or vendor shop may be required, requires Personal Protective Equipment (PPE).

Specific Accountabilities

Lead the review of EPC contractor's engineering and design packages (IFR and IFC) for accuracy, completeness, and compliance with applicable codes (NEC, NESC, IEEE, NFPA, etc.) Provide technical feedback and coordinate design refinements with EPCs and stakeholders.

Assess HV substation and PV plant electrical designs, including substation general arrangements, one-line diagrams, grounding, protection schemes, and relay coordination studies.

Ensure proper integration of MV and HV equipment, including main power transformers (MPTs), inverters, switchgear, and circuit breakers.

Ensure adherence to industry standards, including IEEE, UL, CAS, NFPA, NESC, and NEC.

Evaluate design risks and recommend cost-effective engineering solutions.
Collaborate with EPC teams to ensure comprehensive documentation is submitted to regulatory bodies (e.g., ERCOT, FERC, NERC), demonstrating compliance with operational and interconnection standards. Work closely with regulatory teams to ensure all electrical interconnection implementations meet local, state, and federal regulations.

Accountable to the preparation of and detailed engineering construction drawings within assigned area ensuring efficient and functional designs. Ensure adequate information is provided to enable cost effective construction of Solar/Wind facilities;

Accountable to ensure design compliance with project procedures, design standards (including providing recommendations for improvements), regulatory, environmental, health and safety requirements.

Participates in design review meetings to ensure consistency in the scope, design and expected performance. Follows applicable design review procedures
Lead the specification and requisition of materials by reviewing vendor materials quotations, performing technical bid evaluations and providing recommendations based on technical merit. Collaborate with Supply Chain to procure material via internal tools.

Provide technical support during all project phases, including project development, detailed design, construction, commissioning, close out.

Provide technical guidance during construction, addressing engineering-related RFIs and field modifications.

Support the commissioning and testing of HV substations and PV/wind plant electrical systems, and protection systems.

Participate and witness the factory acceptance tests (FATs) and site acceptance tests (SATs) for major electrical equipment as required.

Responsible for the successful operations of the assigned area with significant corporate financial impact.

Oversees the development and/or implementation of technical solutions, ensuring efficient coordination of technical resources and with other internal and external stakeholders.

Scope/Dimension:

Responsible for the successful operations of the assigned area with significant corporate financial impact.

Oversees the development and/or implementation of technical solutions, ensuring efficient coordination of technical resources and with other internal and external stakeholders.

Provides informal leadership to peers

Please apply in confidence to [email protected]

Randstad Canada is committed to fostering a workforce reflective of all peoples of Canada. As a result, we are committed to developing and implementing strategies to increase the equity, diversity and inclusion within the workplace by examining our internal policies, practices, and systems throughout the entire lifecycle of our workforce, including its recruitment, retention and advancement for all employees. In addition to our deep commitment to respecting human rights, we are dedicated to positive actions to affect change to ensure everyone has full participation in the workforce free from any barriers, systemic or otherwise, especially equity-seeking groups who are usually underrepresented in Canada's workforce, including those who identify as women or non-binary/gender non-conforming; Indigenous or Aboriginal Peoples; persons with disabilities (visible or invisible) and; members of visible minorities, racialized groups and the LGBTQ2+ community.

Randstad Canada is committed to creating and maintaining an inclusive and accessible workplace for all its candidates and employees by supporting their accessibility and accommodation needs throughout the employment lifecycle. We ask that all job applications please identify any accommodation requirements by sending an email to [email protected] to ensure their ability to fully participate in the interview process.