Experienced Groundwater Modeller
Vancouver, BC +4WSP
4+ ansCandidates need a master's or PhD in hydrogeology, geological or civil or environmental engineering, or earth sciences, plus about 4 to 8 years of groundwater modelling experience. Registration as a P.Eng. or P.Geo. with EGBC, or eligibility for it, is required.
MODFLOW, FEFLOW, HydroGeoSphere, Seep/W, ArcGIS, Leapfrog
Design Engineer, Transportation
Fredericton, NBWSP
8+ ansCandidates need a civil engineering degree, 8 to 10 years of experience, and eligibility for professional engineering designation in New Brunswick. Hands-on skill with design software such as Civil 3D or InRoads/OpenRoads and knowledge of TAC geometric design standards are also required.
Civil 3D, InRoads, OpenRoads
Team Lead, Municipal Engineering
Fredericton, NBWSP
10+ ansCandidates need a Civil Engineering degree with a P.Eng. in New Brunswick and 10 years of experience. Strong municipal infrastructure experience, Atlantic Canada permitting knowledge, and skill with AutoCAD, Civil 3D and hydrotechnical modelling are also needed.
AutoCAD, Civil 3D
Senior Project Manager
Vancouver, BC +3WSP
8+ ansCandidates need a degree in environmental, civil or construction-related engineering or science, and 8+ years of project management experience on environmental, mining or infrastructure work. A valid driver's licence and willingness to travel to remote sites are required.
ESRI What if?, Environmental engineering, Forecasting, Procurement, Logistics, Documentation
Technologist – Land Development & Municipal Engineering
Greater Sudbury, ONWSP
Candidates need a three-year Civil Engineering Technology diploma or equivalent, and up to five years of AutoCAD Civil 3D experience. They also need to read construction drawings, hold a valid Ontario driver's licence, and show interest in the C.E.T. designation.
AutoCAD Civil 3D, survey equipment
Lighting Control Specialist, Buildings
Vancouver, BCWSP
Candidates need an education in electrical or architectural engineering, lighting design or building technology, plus substantial lighting and controls design experience on buildings. Knowledge of networked controls, BIM tools such as Revit and AutoCAD, lighting software such as AGi32 or ElumTools, and Canadian and BC codes is required.
AGi32, ElumTools, Revit, AutoCAD
Senior Transmission Lines Engineer, Power Delivery
Toronto, ON +5WSP
10+ ansCandidates need an accredited engineering degree (civil, mechanical or electrical), a P.Eng. licence, and at least ten years of overhead high-voltage transmission design experience, plus project management and leadership skills.
PLS-CADD, PLS-POLE, PLS-Lite, AutoCAD, MicroStation, MFAD
Early Professional, Project Controls
Val-d'Or, QCWSP
2+ ansCandidates need a bachelor's degree or diploma in business, finance, accounting, engineering, or project management, plus up to 2 years of related experience. Strong analytical skills, Excel proficiency, and the ability to communicate financial findings are required.
Microsoft Excel, business reporting tools
Early Professional, Project Coordinator
Val-d'Or, QCWSP
3+ ansCandidates need a diploma or degree in business administration, project management, engineering or environmental science, up to 3 years of relevant experience, and strong organizational and Microsoft Office skills. Professional proficiency in both English and French is required.
Microsoft Excel, Microsoft Word, Microsoft Outlook, Adobe Acrobat
Electrical Technician
Montréal, QC +2WSP
Candidates need a college diploma in electrical engineering technology or instrumentation, along with attention to detail and teamwork skills. Industrial or mining design experience, AutoCAD, site supervision experience and a valid driver's licence are assets.
AutoCAD
Experienced Technician, Design Support
OntarioWSP
3+ ansCandidates need a diploma or degree in civil engineering technology or CAD, at least 3 years of municipal CAD drafting experience, and advanced AutoCAD and Civil 3D skills. Knowledge of grading, drainage and Ontario municipal standards is also required.
AutoCAD, Civil 3D
Senior Geochemist
Vancouver, BC +2WSP
10+ ansCandidates need a geology or geoscience degree and 10+ years of mining industry experience, with recognized expertise in mineralogy, metal leaching, and acid rock drainage. Professional Geoscientist registration in BC, NWT, or Alberta, or eligibility within 6 months, is required.
MIN3P, PHREEQC, Geochemist's Workbench, GoldSim, ioGAS, Leapfrog
Intermediate Geotechnical Engineer-in-Training - Whitehorse
Whitehorse, YTWSP
3+ ansCandidates need a bachelor's degree in geotechnical or civil engineering with a geotechnical focus, EIT registration in Canada, and at least three years as a geotechnical or geological engineer-in-training. A valid Canadian driver's licence is also required.
Instrumentation
Construction Inspector
St. John's, NLWSP
3+ ansCandidates need 3+ years as a Construction Inspector on municipal infrastructure projects, strong interpersonal skills, and a valid driver's licence with a clean driver's abstract. Solid knowledge of NL Municipal Water, Sewer and Roads Master Construction Specifications is preferred.
ESRI What if?, Regulatory compliance, Inspection, Test materials, Quality control, Health and safety
Project Engineering Manager Studies
Etobicoke, ON +4WSP
15+ ansCandidates need a bachelor's in engineering and a P.Eng. in a Canadian province, plus at least 15 years of mining engineering experience with supervisory leadership. Substantial experience with concentrators and mills and field engineering teams is required.
ESRI What if?, Decision making, Project management, Communication skills, Process improvement, P.Eng.
Manager, Finance Strategy & Transformation
Montréal, QCWSP
8+ ansCandidates need 8 to 15 years of strategy, transformation, operating model or finance transformation experience, ideally from a management consulting firm. They must show they can influence senior leaders without formal authority and turn strategy into measurable change. An MBA is an asset.
ESRI What if?, Team leadership, Problem solving
Senior Project Manager/Engineer Site Development, Land Development
Edmonton, ABWSP
10+ ansCandidates need a civil engineering bachelor's degree or technology diploma and 10+ years of private site development design and project management, ideally in Alberta. They must be registered or eligible with APEGA or ASET and know City of Edmonton standards.
Civil 3D, AutoCAD
Lead Structural Engineer, Water/Wastewater
Vancouver, BCWSP
10+ ansCandidates need a master's degree in structural or seismic engineering, at least 10 years of structural experience, and a P.Eng. registered with EGBC. Strong knowledge of BC and Canadian codes and skill with structural analysis software are required.
STAAD.Pro, S-FRAME, CSI software, Autodesk Construction Cloud, Revit, Bluebeam
Project Engineer or Civil Technologist
Canmore, AB +1WSP
5+ ansCandidates need 5+ years of progressive municipal infrastructure design experience, a civil engineering degree or technology diploma with APEGA or ASET eligibility, proficiency in Civil 3D and AutoCAD, and a valid driver's licence.
Civil 3D, AutoCAD, Bluebeam, Microsoft Office
Senior Materials Engineer, Concrete
Vancouver, BC +1WSP
10+ ansCandidates need a civil or materials engineering degree, 10+ years of materials experience in Canada and a registered P.Eng. with EGBC or eligibility for it. Strong concrete expertise to CSA and ASTM standards, proven business development skills and a valid BC driver's licence are also required.
ESRI What if?, Sales, Leadership, Coaching, Non-destructive testing, P.Eng.
Senior Engineer, Bridges
British ColumbiaWSP
10+ ansCandidates need a civil engineering degree focused on bridge structures, eligibility for the British Columbia P.Eng. licence and 10+ years of detailed bridge design and project management. Strong knowledge of CAN/CSA-S6 and skill with CSIBridge and MIDAS are also required.
CSIBridge, MIDAS
Land Development Project Engineer/Manager
Calgary, ABWSP
10+ ansCandidates need 10 to 15+ years of land development experience, a civil engineering bachelor's degree and an active P.Eng. in Alberta. Knowledge of Alberta municipal processes and experience designing water, sanitary, stormwater and roadway systems are required; a PMP is an asset.
ESRI What if?, Inspection, Civil engineering, P.Eng., PMP, Valid driver's licence
Geotechnical/Materials Technician Calgary
Calgary, ABWSP
Candidates need a diploma or degree in civil, geotechnical or materials engineering technology, plus hands-on testing experience and knowledge of CSA and ASTM standards. They must be able to work outdoors in all weather, travel to sites and hold a valid driver's licence.
Drill rig, Geotechnical instrumentation
Senior Rock Mechanics Engineer
Toronto, ON +2WSP
8+ ansCandidates need a bachelor's degree in an engineering discipline, a P.Eng. designation or eligibility, and 8+ years of rock mechanics experience including underground mining. Strong numerical modelling skills with Rocscience tools are required.
RS2, RS3, FLAC3D, EX3, Rocscience software, Televiewer