Emplois “P&ID drawings” au Canada – Page 16

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Technical Systems Sales Specialist

  Calgary, AB

  Temps plein

  

  Randstad Canada

  2+ ansCandidates need a mechanical, chemical, process, or industrial engineering technology diploma or degree and at least 2 years of experience in industrial finishing or fluid handling. CET designation is highly preferred, along with AutoCAD, Excel, and ERP/CRM skills.

  AutoCAD, Microsoft Excel, NetSuite

  1 mois

  Drafting Technologist

  Edmonton, AB

  Contrat

  

  Randstad Canada

  5+ ansCandidates need 5+ years of drafting experience in oil and gas, experience across mechanical, piping, electrical and instrumentation disciplines, and strong AutoCAD skills. They must work independently and manage multiple priorities.

  AutoCAD, Revit, LPDMS

  1 mois

  Civil Designer III

  Edmonton, AB

  Contrat

  

  Randstad Canada

  5+ ansCandidates need at least 5 years of oil and gas drafting experience across several engineering disciplines and strong AutoCAD skills. They must be able to develop P&IDs, plot plans and facility layouts, and work independently in a contract or remote setting.

  AutoCAD, Revit, LPDMS

  1 mois

  B-Pressure Welder

  Nisku, AB

  45 $/hContrat

  

  Randstad Canada

  3+ ansCandidates need an active Alberta Journeyman Welder certificate and a current Alberta B-Pressure (F-Number) ticket, plus 3+ years of code pipe welding. They must be skilled in SMAW, GMAW and MCAW and able to pass a 6G shop weld test.

  Welding helmet, Hand tools, Rigging tools

• 1 mois

  Intermediate Instrumentation & Controls Engineer

  Calgary, AB

  

  Lauren Services: Lauren Services is a full-suite engineering and project execution service provider that has roots back to a small consultancy partnership in Calgary…

  8+ ansCandidates need a P.Eng, a Bachelor's or Master's degree in an electrical, instrumentation or control field, and at least 8 years of I&C experience in Oil & Gas or EPCM. Strong PLC/HMI, control panel and Canadian Electrical Code knowledge is needed, and project management experience is an asset.

  PLC, HMI, Allen-Bradley, Siemens, GE, Emerson

• 1 mois

  Technologist, Metallurgy Development (Temporary)

  Trail, BC

  100k–108k $/anSur placeTemps plein

  T

  Teck

  5+ ansTeck needs a graduate of a recognized technology institute or university in metallurgy, mineral processing or chemical sciences, or an ASTTBC certification. Candidates need at least 5 years of relevant experience, strong organization and computer skills, and a valid class 5 driver's licence.

  Excel, Word, PowerPoint, LIMS, PDH, GE Aps

• 1 mois

  Instrumentation and Control Technician (Water Operations)

  Kitchener, ON

  Temps plein

  

  theregio03

  4+ ansCandidates need a 3-year college diploma in a related field plus 4 years of directly related experience, a Class II Water Distribution and Class II Water Treatment certificate (or obtain them within three years), and an Industrial Instrument Mechanic certificate of qualification (or obtain it within five years). Current emergency first aid, a valid Class G licence and experience with ladder logic PLCs are also required.

  PLC, SCADA, CMMS, Allen Bradley, Studio 5000, RS Logix

• 1 mois

  Buyer/Purchaser Intermediate

  Halifax, NS

  IM

  I M P Group International Inc.

  3+ ansCandidates need 3 to 5 years of purchasing or procurement experience, ideally in aerospace or aviation. They should have a logistics or supply chain credential or degree, strong Microsoft Office and ERP skills, and the ability to pass security clearances.

  MS Office, JD Edwards, PeopleSoft, DRMIS, CFSS

• 1 mois

  Engineer - Automation & Digitalization

  Richmond, BC

  AA

  ANDRITZ AG: The company offers a broad portfolio of innovative plants, equipment, systems, services and digital solutions for a wide range of industries and end…

  3+ ansCandidates need a diploma or degree in electrical engineering, at least 3 years of relevant experience, and EGBC registration as an EIT or P.Eng, or eligibility for it. They must work independently, communicate well in English, and know North American standards.

  PLC, DCS, HMI

• 1 mois

  Mechanical Designer

  Calgary, AB

  Temps plein

  EI

  Ecolab Inc.

  5+ ansCandidates need a diploma in mechanical engineering technology or design, at least 5 years of mechanical design experience, and skill in SolidWorks and Revit. Experience making manufacturing drawings and knowledge of AWS/ASME welding standards are also required.

  SolidWorks, Revit, CAD software

• 1 mois

  Project Leader

  Peterborough, ON

  Temps plein

  

  PepsiCo

  3+ ansCandidates need an engineering bachelor's degree and at least 3 years of manufacturing experience, including process optimization and high-speed packaging. Strong leadership, communication and analytical skills, plus Microsoft 365 proficiency, are required.

  Allen-Bradley PLC, CAD

  1 mois

  Control Specialist - New Grad

  Cambridge, ON

  Temps plein

  

  PepsiCo

  1+ ansCandidates need a recent (2025 or 2026 graduation) engineering or related diploma, working knowledge of industrial control systems, and skills with Allen Bradley and Siemens PLCs and Wonderware/FactoryTalk HMI software. Strong communication, coaching and problem-solving abilities are also required.

  Allen Bradley PLC, Siemens S7, Aveva Wonderware, FactoryTalk View HMI, VFD

• 1 mois

  Intermediate Piping Designer - S3D

  Calgary, AB

  Contrat

  

  TWD Technologies Ltd.: TWD is a leading global engineering firm focusing on traditional and transitional energy projects and innovative infrastructure projects.

  4+ ansTWD Technologies needs a candidate with a diploma or degree in mechanical engineering technology, piping design or drafting, plus 4 to 9 years of piping design experience. Strong S3D modelling skill, knowledge of piping codes and standards, and the ability to coordinate within multidisciplinary teams are required.

  Intergraph Smart 3D (S3D), P&IDs, Electronic document management systems

• 1 mois

  Intermediate Controls Technologist / Engineer

  Calgary, AB

  Temps plein

  

  EnGlobe Corp.: Specialty engineering and environmental services firm with over 60 locations across Canada.

  5+ ansCandidates need an engineering degree, technologist diploma or trade certificate, plus 5+ years of automation or controls experience. Strong safety performance, configuration experience, good communication skills, willingness to travel to sites and a clean driving record are required.

  Honeywell Experion PKS, Emerson DeltaV, ABB, Allen-Bradley, Schneider Electric, Wonderware InTouch

• 1 mois

  Mechanical Designer

  London, ON +1

  Temps plein

  

  Veralto Global

  3+ ansCandidates need a technical degree or equivalent and 3-5 years of mechanical design experience. Strong Autodesk Inventor skills, document control experience with Autodesk Vault, and knowledge of piping materials and structural steel standards are required.

  Autodesk Inventor, AutoCAD, Autodesk Vault, ERP systems

• 1 mois

  Signalling Hardware Design Engineer

  Toronto, ON

  100k–135k $/an

  

  Alstom

  5+ ansCandidates need an engineering bachelor's degree in electrical, electronic, automation or a related discipline, plus 5 to 10 years of system design or electrotechnical product development in a regulated environment. Knowledge of interlocking systems, safety principles and power supply design is required, and P.Eng is preferred.

  Design hardware, Product comprehension, Process improvement, Documentation, Debugging, Analytical skills

• 1 mois

  OxyChem 3rd Class Relief Power Engineer

  Thorold, ON

  Temps plein

  OO

  OVC Oxy Vinyls Canada Co

  Candidates need a TSSA 3rd Class Operating Engineer certificate, knowledge of the Occupational Health and Safety Act, and mechanical repair experience. They must read process diagrams and P&IDs, use basic office software, and accept shift, overtime and on-call work.

  Delta V DCS, Industrial hand tools, Power tools, Respirator

• 1 mois

  Senior Process Engineer

  Calgary, AB

  FC

  Fluor Careers: Fluor Corporation is a global engineering, procurement and construction company.

  12+ ansCandidates need a four-year chemical engineering degree or equivalent, 12+ years of process engineering experience in an EPC environment, and P.Eng. designation or eligibility. They also need strong process design, simulation and process safety skills, plus leadership and communication abilities.

  Process simulation software

  1 mois

  Senior Electrical Design Supervisor

  Vancouver, BC

  FC

  Fluor Careers: Fluor Corporation is a global engineering, procurement and construction company.

  Fluor Careers needs candidates with a two-year accredited degree or equivalent and about 25 years of related work experience, or 27 years without a degree. Candidates need advanced knowledge of CAD and electrical design software, electrical design requirements, and practical field experience.

  Hexagon Smart Electrical, Hexagon Smart 3D, 2D CAD, 3D CAD

• 1 mois

  Senior Process Engineer

  Calgary, AB

  Temps plein

  F

  Fluor: Fluor Corporation is a global engineering, procurement and construction company.

  12+ ansCandidates need a four-year chemical engineering degree or equivalent, 12+ years of process engineering experience in an EPC environment, and a P.Eng. or eligibility for registration. Strong process simulation, process safety and leadership skills are also required.

  Process simulation software

• 1 mois

  Principal Engineer I - Process Engineering

  Vancouver, BC

  FM

  Freeport McMoRan: (FCX) is a leading international metals company with headquarters in Phoenix, Arizona.

  5+ ansCandidates need a metallurgical or chemical engineering degree with 3 to 7 years of related experience, depending on the degree level. Strong analysis, judgment, communication and collaboration skills are required, and experience with major capital projects and process modeling tools is preferred.

  Metsim, HSC, JKSimMet

• 1 mois

  Instrumentation & Control Engineer, Senior - Nuclear, Bowmanville EOI

  Bowmanville, ON

  H

  Hatch

  10+ ansCandidates need a B.Sc. or B.Eng. in electrical, I&C or systems engineering, a professional engineer registration in Ontario (or eligibility), and at least 10 years of I&C project experience. Nuclear quality system experience, familiarity with CSA N series, ISA and IEC codes, and work with Canadian nuclear clients are required or preferred.

  P&ID, PFD

  1 mois

  Mechanical Package Engineer

  Mississauga, ON

  H

  Hatch

  15+ ansCandidates need a mechanical engineering degree, P.Eng. registration or eligibility, and 15 years of experience with at least 5 in EPCM or heavy industry. Hatch also expects hands-on experience with pumps, compressors, vessels, crushers and conveyors, and knowledge of ASME, API and CSA standards.

  AutoCAD, Navisworks, SmartPlant, Plant 3D, PV Elite, Bentley

  1 mois

  Junior piping designer - St-John's

  St. John's, NL

  H

  Hatch

  Candidates need a mechanical engineering technology diploma or equivalent, plus skill in an industry-standard 2D design package and 3D piping design. Hatch also requires working knowledge of piping components, materials, and good communication skills.

  Promote company, Mechanical engineering, Design package, Communication skills, Interpersonal skills

17 entreprises