Emplois “Hoisting and lifting equipment” au Canada – Page 19

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Overhead Crane Service Technician

  Stoney Creek, ON

  Sur placeTemps plein

  

  Zelus Material Handling: Zelus specializes in designing, manufacturing and servicing of overhead cranes, monorails, hoists and jib cranes of all capacities.

  2+ ansCandidates need at least two years of experience, a secondary school diploma, and ideally vocational or technical training. A current driver's licence and the ability to lift up to 50 lbs are required, and electrical or mechanical licences are an asset.

  overhead cranes, hoists, chain falls, pullers

• 1 mois

  DZ Driver

  Ottawa, ON

  Sur placeTemps plein

  

  Northstar Access: This is matched by the company’s pride in delivering only the highest level of customer service and satisfaction.

  Northstar Access needs candidates with a DZ licence, flatbed truck experience, a high school education or GED, and a clean drivers' abstract. Commercial delivery experience and the ability to lift up to 50 lbs frequently and 100 lbs occasionally are also required.

  flatbed truck, Moffett truck, dollies, lifts

• 1 mois

  Maintenance Mechanic / Warehouse Technician

  Mississauga, ON

  Temps plein

  CK

  CKE KONE Inc. (Canada)

  2+ ansCandidates need 2+ years in industrial maintenance, mechanical repair, millwright work, electrical maintenance or a related field. They must read electrical schematics and wiring diagrams, diagnose 115V to 480V motors, and handle lifting up to 50 lbs; lift truck experience is an asset.

  test instruments, circuit diagrams

  1 mois

  NBS/MOD Mechanic | Winnipeg

  Winnipeg, MB

  54,11 $/hTemps plein

  CK

  CKE KONE Inc. (Canada)

  Candidates need a Manitoba Class M electrical licence, completion of the CEIEP program, and a valid Mechanic's card. Strong communication, concentration, colour perception and physical fitness for field work are required.

  hand tools, power tools

  1 mois

  Field Installation / Modernization Mechanic - Winnipeg

  Winnipeg, MB

  Temps plein

  CK

  CKE KONE Inc. (Canada)

  Candidates need a valid TSBC Class A licence, the ability to read technical documents, and clear written and spoken communication. They must concentrate closely on wiring and installation work, handle physical demands such as lifting up to 100 lbs and frequent stooping, and work outdoors in uncontrolled weather.

  hand tools, power tools

• 1 mois

  Conversion- Material Handler

  Vancouver, BC

  Sur placeTemps plein

  ML

  Maersk Logistics & Services Canada Inc.

  Candidates need a high school diploma or GED, or one to three months of related experience or training. Basic reading, math and speaking skills are required, and bilingual Spanish is helpful but not necessary.

  industrial truck, electric hoist, conveyor

• 1 mois

  Equipment Rentals Specialist

  Edmonton, AB

  Temps plein

  CR

  CB Resources Corporation

  2+ ansCandidates need a bachelor's degree or certificate and at least 2 years of experience in construction rentals, logistics, equipment or warehouse management. They should be organized, communicate well with stakeholders, and be proficient with Microsoft Office and rental software such as Texada or Wynne RentalMan.

  Texada, Wynne RentalMan, Coupa, Microsoft Office

• 1 mois

  Class I Chemical Delivery Driver, Quebec

  Laval, QC +2

  35,26 $/hTemps plein

  CE

  (CAN) Ecolab Co.

  3+ ansEcolab needs a driver with a current Class I CDL with the FM endorsement and three years of commercial driving experience, including manual transmission. Candidates must be bilingual in French and English, lift 50 lbs, and pass a background check.

  Peterbilt trucks, tank trucks, forklift, trailer hoist, chemical pump, hoses

• 1 mois

  Heavy Duty Mechanic

  Manitoba

  Temps plein

  UR

  United Rentals of Canada, Inc.

  5+ ansCandidates need a high school diploma, a valid driver's licence with a good driving record, and 5+ years of experience repairing equipment. They must own their tools, read schematics well, and communicate clearly with customers and teammates.

  diesel engines, hydraulic systems, diagnostic programs, schematics, service vehicle

• 1 mois

  Millwright Tubular - Regina

  Regina, SK

  Temps plein

  IP

  Interpro Pipe & Steel Inc.

  5+ ansCandidates need a Red Seal Journeyperson Millwright certification, Grade 12 or equivalent, and ideally five years of heavy industrial maintenance experience. They also need skills with mechanical tools, blueprints, hydraulic and pneumatic systems, and cranes or forklifts.

  Oracle, hydraulic hose crimper, bearing heater, alignment laser, hoist, cutting torch

• 1 mois

  Forklift Operator

  Nisku, AB

  Temps plein

  SL

  Silent-Aire Limited Partnership

  2+ ansCandidates need at least 2 years of forklift experience in a warehouse or shipping setting and a valid forklift licence (class 1, 4 or 5). They must communicate clearly in English by radio and in person, lift over 40 pounds, and know safe lifting and workplace safety practices.

  forklift, hoist, elevating platform, lift beam, swivel hook, radio

• 1 mois

  Mould Maker Apprentice

  Brampton, ON

  Temps plein

  

  Magna Exteriors Inc.

  Candidates need at least one year of a Tool and Die Maker or Mold Maker program from a college, with second year preferred, plus experience with hand and power tools and machining. Good communication, mechanical aptitude and the ability to work both independently and in a team are also needed.

  Lifting and hoisting equipment, Hand tools, Power tools, Machine tools

• 1 mois

  Millwright or Industrial Electrician - GY Shift - Friday to Tuesday - 9:00pm to 5:00am - $35 to $45/hr

  Delta, BC

  Temps plein

  GW

  Golden West Baking Company ULC

  3+ ansCandidates need a Red Seal or equivalent millwright or electrician ticket and 3 to 5 years of experience in fast-paced manufacturing, preferably food. Industrial controls skills (PLCs, VFDs, HMIs), welding (MIG, Stick, TIG) and the ability to work independently under pressure are required.

  PLC Allen Bradley, PLC Siemens, HMI, VFD, CMMS

• 1 mois

  Industrial Millwright

  Brampton, ON

  Temps plein

  IM

  IG Machine & Fibers Ltd.

  3+ ansCandidates need a valid Ontario Industrial Mechanic licence (433A, Red Seal C of Q) and at least 3 years of manufacturing experience. They must read mechanical drawings, work with pneumatic controls and welding, troubleshoot problems, and work shifts, extended hours and weekends.

  Metric tools, Precision measuring instruments, Hoists, Cranes, Welding equipment, Machine shop equipment

• 1 mois

  Maintenance A1

  Brampton, ON

  37,24 $/hTemps plein

  II

  IKO Industries Ltd.

  3+ ansCandidates need an Ontario Industrial Mechanic licence (433A, Red Seal), at least 3 years of manufacturing maintenance experience, and the ability to read mechanical drawings and work with welding and cutting. They must also be able to lift 50 pounds, work at heights and in confined spaces, and work shifts, extended hours and weekends.

  Maximo, Metric tools, Calipers, Micrometers, Hoists, Cranes

  1 mois

  Millwright

  Brampton, ON

  44,72 $/hTemps plein

  II

  IKO Industries Ltd.

  3+ ansCandidates need a valid Ontario Industrial Mechanic licence (433A, Red Seal), at least 3 years in a manufacturing environment, and a full set of metric tools. Experience with mechanical devices, pneumatics and welding, and the ability to read mechanical drawings, are required.

  Maximo, hoists, cranes, micrometers, calipers, levels

  1 mois

  Millwright

  Madoc, ON

  44,12 $/h

  II

  IKO Industries Ltd.

  3+ ansCandidates need a valid Ontario Industrial Mechanic licence (433A, Red Seal), 3 to 5 years of manufacturing experience, and the ability to read mechanical drawings. They must bring a full set of metric tools, work shifts and weekends, lift up to 50 pounds, and work at heights and in confined spaces.

  Micrometers, Calipers, Hoists, Cranes, Welding equipment, Maximo

  1 mois

  Millwright

  Brampton, ON

  45,61 $/hTemps plein

  II

  IKO Industries Ltd.

  3+ ansCandidates need a valid Ontario Industrial Mechanic 433A (Red Seal) certificate, at least 3 years of manufacturing experience, and the ability to read mechanical drawings. Candidates must also be able to work shifts, extended hours and weekends, lift 50 pounds, and work at heights and in confined spaces.

  Maximo, micrometers, calipers, hoists, cranes, welding equipment

• 1 mois

  Millwright

  Brampton, ON

  43 $/hTemps plein

  CC

  Canroof Corporation Inc.

  3+ ansCandidates need a Red Seal Ontario Industrial Mechanic licence (433A), at least 3 years in manufacturing, and experience with mechanical devices, pneumatics and welding or cutting. They must read mechanical drawings, work shifts and extended hours, and lift up to 50 pounds.

  Maximo, Metric tools, Calipers, Micrometers, Hoists, Cranes

• 1 mois

  Level 3/4 - Millwright Apprentice

  Stratford, ON

  32,81–41,38 $/hTemps plein

  P

  PM-Stratford

  Candidates need a high school diploma or equivalent and enrolment in or completion of the trade school portion of a Millwright apprenticeship. A basic understanding of mechanical systems and a strong willingness to learn are essential.

  Lathe, Grinder, Lifting and hoisting equipment, Machine tools

  1 mois

  PLC Specialist

  Stratford, ON

  62k–80k $/anTemps plein

  P

  PM-Stratford

  5+ ansCandidates need a university degree in electrical engineering or a college diploma, plus 5+ years of controls and robot experience in manufacturing. Strong knowledge of Studio 5000, RSLogix, TIA Portal and Step 7 is required, with leadership and team-lead ability.

  Studio 5000, RSLogix, TIA Portal, Step 7, Cognex cameras, AutoCAD

• 1 mois

  Machine Operator Level 3P- 2nd shift

  Cambridge, ON

  Sur placeTemps plein

  RC

  RA Canada Ltd. (CAN)

  2+ ansCandidates need two years of related experience, a high school diploma or GED, and the ability to read blueprints and operate CNC and power equipment. They must lift 35 lbs, stand for long periods, and work well in a team.

  Prima Power, CNC shear, Press brake, Punch press, Copper bender, Lift truck

  1 mois

  Machine Operator 3P- 2nd shift

  Cambridge, ON

  52k–76k $/anSur placeTemps plein

  RC

  RA Canada Ltd. (CAN)

  Candidates need a high school diploma or GED. CNC operation, sheet metal fabrication experience and knowledge of tooling and bend calculations are preferred.

  Prima Power, press brake, CNC shear, punch press, copper bender, deburring equipment

• 1 mois

  Class 1 Truck Driver

  Leduc, AB

  Temps plein

  CC

  (CAN) ChampionX Canada ULC

  5+ ansCandidates need a high school diploma, a valid Class 1 licence and an acceptable five-year driving record. They also need five or more years of oilfield or dangerous goods hauling experience.

  Forklift, Trailer hoist, Chemical pump, Hoses, Meters, Printer

17 entreprises