Emplois “Scans 3D” au Canada – Page 2

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 6j

  Geomatics New Graduate - May 2027

  Vancouver, BC

  60k–80k $/an

  

  McElhanney Ltd.: Established in 1910, McElhanney is an employee-owned company that provides geomatics, engineering, geospatial, planning, landscape architecture,…

  Candidates need a completed or near-complete Geomatics diploma or degree, a strong interest in hands-on field work, and the physical ability to work outdoors on active sites. Attention to detail, sound judgement and clear communication are expected, and prior outdoor, field, construction or labour experience is an asset.

  GNSS receiver, Total station, Digital level, RPAS, Mobile mapping system

  9j

  Construction Surveyor / Survey Technologist

  Alberta

  30–45 $/h

  

  McElhanney Ltd.: Established in 1910, McElhanney is an employee-owned company that provides geomatics, engineering, geospatial, planning, landscape architecture,…

  2+ ansCandidates need a two-year technical diploma in Geomatics, Civil Engineering or a related subject with at least 2 years of similar experience, or more experience if no diploma is held. They need total station competence, physical ability to work on rough terrain, and a valid driver's licence.

  Total station, Civil 3D, MicroSurvey, Trimble Business Centre, StarNet, RPAS/drone

  9j

  Construction Surveyor / Survey Technologist

  Edmonton, AB

  30–45 $/h

  

  McElhanney Ltd.: Established in 1910, McElhanney is an employee-owned company that provides geomatics, engineering, geospatial, planning, landscape architecture,…

  2+ ansCandidates need a two-year technical diploma in Geomatics, Civil Engineering or a related subject with at least 2 years of similar experience, or more experience if no diploma is held. They need total station competence, physical ability to work on rough terrain, and a valid driver's licence.

  Total station, Civil 3D, MicroSurvey, Trimble Business Centre, StarNet, RPAS/drone

• 6j

  Surveyor

  Saint John, NB

  Temps plein

  

  JDI

  1+ ansCandidates need a high school diploma and at least 1 year of civil construction or engineering surveying experience, with AutoCAD and survey software skills and good communication. A civil or geomatics degree, 2+ years of experience, and drone, hydrography or underground utility locating licences are assets.

  AutoCAD, survey software, drone

• 6j

  Well Integrity Analyst

  North Vancouver, BC

  30–34 $/hSur placeTemps plein

  DT

  DarkVision Technologies

  Candidates need at least 6 months of engineering or scientific experience, which co-op or internship work can count toward, and a STEM degree or diploma. They must work on-site on rotating day and night shifts and handle tight deadlines.

  proprietary ultrasound imaging software

• 6j

  Lead Layout and Design Specialist , Mining and Minerals

  Oakville, ON

  HybrideTemps plein

  W

  Worley: Worley is a global professional services company of energy, chemicals and resources experts headquartered in Australia.

  Worley needs candidates fluent in PDMS/E3D with mining or minerals experience, brownfield site experience, and a valid driving licence. Candidates also need a technical school diploma, a proven safety record, strong communication skills, and the ability to work independently.

  AVEVA PDMS, E3D, Microsoft Excel, Microsoft Word, Microsoft Outlook

  7j

  Lead Layout and Design Specialist , Mining and Minerals

  Oakville, ON

  Temps plein

  W

  Worley: Worley is a global professional services company of energy, chemicals and resources experts headquartered in Australia.

  Worley needs candidates fluent in PDMS/E3D with mining or minerals experience, brownfield site experience, and a valid driving licence. Candidates also need a technical school diploma, a proven safety record, strong communication skills, and the ability to work independently.

  AVEVA PDMS, E3D, Microsoft Excel, Microsoft Word, Microsoft Outlook

• 7j

  Hygiéniste dentaire - 2192

  Repentigny, QC

  30 $/hTemps plein

  CD

  Carrière Dentaire

  Candidates need to be licensed dental hygienists, comfortable with digital scanning tools such as iTero and PrimeScan, and able to work well in a collaborative team.

  iTero, PrimeScan, imprimante 3D

• 7j

  BIM/VDC Coordinator

  Calgary, AB

  Temps plein

  

  Trotter & Morton

  1+ ansCandidates need a 3-year diploma or 4-year degree in a technical field and 1-3 years of experience, with strong Autodesk Revit skills. Attention to detail, organization, communication and problem-solving are required, and mechanical or electrical construction experience is a clear plus.

  Autodesk Revit, AutoCAD, Navisworks, Procore, Trimble SysQue, MS Excel

• 7j

  Mechanical Mine Layout Designer

  Toronto, ON +1

  B

  BBA

  Candidates need experience with 3D CAD software such as Intergraph Smart 3D, AutoCAD and SolidWorks, and a mechanical engineering or drafting background. The posting also asks for the ability to manage several projects at once and to work with 3D point cloud scan data.

  Intergraph Smart 3D, AutoCAD, SolidWorks

  7j

  Mechanical/Piping Designer (up to five years of experience)

  Mont-Saint-Hilaire, QC

  B

  BBA

  Candidates need mechanical design experience of up to five years, with 3D design skills and comfort working with point clouds from 3D scanning. They also need to produce detailed calculations, plans and specifications.

  3D scanning point clouds

  7j

  Mechanical Designer, Hydroelectric sector

  Quebec

  B

  BBA

  Candidates need mechanical design skills, 3D modelling experience, and the ability to work with technical drawings and calculations. The posting asks for engineering project support and a focus on high-quality professional work.

  3D scanning equipment

  7j

  Designer, Mechanical, Piping and Structural (from 2 to 10 years of experience)

  Québec, QC

  B

  BBA

  2+ ansCandidates need roughly 2 to 10 years of design experience and the ability to perform detailed engineering calculations. The posting also values working effectively with more experienced engineers on complex tasks.

  3D scanning equipment

  7j

  Intermediate Designer/Technician, Mechanical and Industrial Piping

  Val-d'Or, QC +1

  B

  BBA

  Candidates need experience with 3D mechanical design and 2D drafting, plus the ability to work with 3D scanning data and produce quality deliverables.

  7j

  Designer, Mechanical and Piping (five years of experience or less)

  Mont-Saint-Hilaire, QC +1

  B

  BBA

  Candidates need an engineering or design background suited to mechanical and piping work, with five years of experience or less. Strong technical skills, curiosity and a willingness to learn and work as a team are expected.

  3D scanning

  7j

  Designer, Mechanical and Piping

  Mont-Saint-Hilaire, QC +1

  B

  BBA

  Candidates need engineering design experience with 3D modelling and mechanical drawings, plus the ability to work with laser scan point clouds and technical calculations. Experience in mining, hydropower or heavy industry is an asset.

  Electrical engineering, Mechanical systems, Regulatory compliance

  7j

  Technician/Designer - Industrial Piping

  Montréal, QC +2

  B

  BBA

  Candidates need experience in piping design and 3D modelling, and the ability to work with clients and manage project resources.

  3D scanning technology, Point clouds

  7j

  Junior Technician/Designer - Industrial Piping

  Montréal, QC +2

  B

  BBA

  Candidates need hands-on piping design experience with 3D modelling and drafting software. Strong technical drawing skills and the ability to work with clients and project teams are expected.

• 7j

  Intermediate to Senior Autonomy Engineer

  Barrie, ON

  ME

  MACLEAN ENGINEERING & MARKETING CO. LIMITED

  5+ ansCandidates need 5+ years of robotics, automation or controls experience, plus an engineering degree or equivalent. They must be strong in C++ or Python on Linux, closed-loop control, kinematics, CAN bus integration and ROS, and be comfortable in a small fast-moving R&D team.

  ROS, ROS 2, Gazebo, Isaac Sim, MATLAB, Simulink

• 7j

  Lead Piping Designer

  Calgary, AB

  Temps plein

  K

  Kent

  20+ ansCandidates need 20+ years of progressive piping design experience, ideally in industrial or energy facilities, and experience leading design teams. They also need strong knowledge of codes, 3D plant design software, and P&ID interpretation, plus excellent English communication.

  AutoCAD Plant 3D, E3D, S3D

• 8j

  Senior VDC Manager

  Whitecourt, AB

  Sur placeTemps plein

  

  FLINT Corp.: FLINT is a leading provider for Maintenance & Turnarounds, Wear Technologies, Fabrication, Modularization & Machining, Facility Construction,…

  5+ ansCandidates need a technical diploma or certificate, or equivalent experience, with 5-10 years in EPC or EPCM engineering, ideally in oil and gas. They must know 2D and 3D CAD tools, laser scanning and point cloud files, and have strong communication and time management skills.

  AutoPlant, Plant 3D, OpenPlant, AutoCAD, MicroStation, FARO laser scanner

• 9j

  Water / Wastewater Technologist (CAD Drafting)

  Edmonton, AB

  IE

  ISL Engineering & Land Services

  Candidates need drafting experience or a recent technical drafting, design or engineering education, and a meticulous, organized approach to work. Autodesk Plant 3D and Revit experience, field or industry exposure, and ASET or APEGA registration are considered assets.

  Autodesk Plant 3D, Revit, Civil 3D

• 9j

  Senior Mechanical Project Engineer

  Richmond, BC +1

  105k–132k $/an

  

  BC Ferries

  8+ ansCandidates need a mechanical or marine engineering degree and at least eight years of marine design, construction or repair experience, or a master's degree with equivalent experience. A P.Eng. or eligibility for EGBC registration, AutoCAD, and strong communication and project management skills are required.

  AutoCAD, 3D scanning, 3D modelling tools

• 9j

  Laser Scanning Technician

  Fort McMurray, AB

  38,40 $/hTemps plein

  WC

  Weir Canada, Inc.

  1+ ansCandidates need a technical diploma or bachelor's in engineering or a related discipline, 1-2 years of relevant experience, and proficiency with FARO and Geomagic Control X. A valid driver's licence and willingness to travel extensively in Wood Buffalo are also required.

  FARO Arm, FARO software, Geomagic Control X, Autodesk ReCap Pro

13 entreprises