Emplois “powered lifts” au Canada – Page 21

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 2j

  Mechanical Assembler

  Cambridge, ON

  TI

  Tigercat Industries

  Candidates need mechanical skills with hand and power tools and related experience such as small engine repair, equipment maintenance or trades courses. Experience reading blueprints is an asset. The role requires the ability to adapt to changing conditions and work well in a team.

  Hand tools, Power tools, Pneumatic tools, Overhead crane, Jib crane

  2j

  Brake Press Operator

  Brant, ON

  TI

  Tigercat Industries

  Candidates need experience operating metalworking machines, with brake press experience preferred. They must be able to read blueprints and measuring tools, troubleshoot problems, handle physical demands such as standing for long periods and lifting up to 50 pounds, and adapt to changing conditions.

  brake press, jib crane, Vernier, protractor, tape measure, micrometer

  2j

  Industrial Maintenance Mechanic | Millwright (433A)

  Brant, ON

  TI

  Tigercat Industries

  Candidates need an Ontario Millwright licence and previous industrial millwright experience, plus mathematical aptitude and strong hydraulic, electrical, mechanical and diesel troubleshooting skills. A G2 Gas Technician certification is an asset.

  CNC machines, Lathes, Boring mills, Brake presses, Laser cutting machines, Plasma cutting machines

  2j

  Industrial Painter

  Woodstock, ON

  TI

  Tigercat Industries

  Tigercat Industries needs candidates who can work to detail, troubleshoot paint flaws and follow safety rules around hazardous materials. Knowledge of coatings and spray tools is expected, and exposure to apprenticeships or industrial painting is an asset.

  spray guns, sanders, sandblasters, overhead crane, paint booth equipment

  2j

  Electrical Wire Harness Assembler

  Brant, ON

  TI

  Tigercat Industries

  Candidates need good hand dexterity, attention to detail, and the ability to read electrical drawings and schematics. Basic math, mechanical aptitude with hand and power tools, and the ability to tell coloured wires apart are also required.

  hand tools, power tools, crimp press, wire twister, wire stripper, routing board

• 2j

  Assistant Supervisor Track Maintenance-CA

  Concord, ON

  

  CN

  3+ ansCandidates need 3 to 5 years of safety compliance experience, problem-solving skills and a valid driver's licence. A high school diploma or GED is required, with a bachelor's degree, railroad signal certification, union supervision and budget experience as assets.

  Track Inspection System (TIS), Microsoft Office

• 2j

  Facility Technician

  Corner Brook, NL

  31,19 $/hTemps plein

  JC

  Johnson Controls LP CAN

  2+ ansJohnson Controls LP CAN needs candidates with a valid 4th Class Power Engineer Certificate, at least 2 years of HVAC and building systems troubleshooting, and central plant experience. A valid driver's licence, the ability to lift 50 lbs, and a willingness to work rotating and on-call shifts are also required.

  CMMS, Metasys, handheld technology, Microsoft Office

• 2j

  Structural Design Engineer/EIT

  Edmonton, AB

  65k–80k $/anHybrideTemps plein

  

  AECOM: AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025.

  2+ ansCandidates need a civil engineering degree with a structural specialization, 2+ years of structural analysis and design experience, and APEGA EIT registration or eligibility. Proficiency with structural software such as ETABS, SAP2000 and Revit, and knowledge of Canadian codes like NBC, CSA S16 and CSA A23.3, are preferred.

  ETABS, SAP2000, SAFE, STAAD.Pro, RAM Structural System, Revit

  2j

  Structural Design Engineer/EIT

  Calgary, AB

  65k–80k $/anHybrideTemps plein

  

  AECOM: AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025.

  2+ ansCandidates need a civil engineering degree with a structural specialization, 2+ years of structural analysis and design experience, and APEGA EIT registration or eligibility. Proficiency with structural software such as ETABS, SAP2000 and Revit, and knowledge of Canadian codes like NBC, CSA S16 and CSA A23.3, are preferred.

  ETABS, SAP2000, SAFE, STAAD.Pro, RAM Structural System, Revit

• 2j

  Construction- Concrete/ Cement

  Niagara Falls, ON

  Temps plein, Contrat

  

  Express Employment Professionals: The Express franchise brand is an industry-leading, international staffing company with franchise locations across the U.S., Canada, South Africa,…

  Candidates need hands-on experience with concrete and cement work and general construction labour. They must be able to use hand and power tools, lift heavy materials and follow workplace safety procedures.

  Hand tools, Power tools

• 2j

  Labourer

  Laval, QC

  Temps plein

  

  Brandt in Canada

  Candidates need a valid Class 5 driver's licence, the ability to lift 75 lbs, and basic mechanical aptitude. Forklift experience, equipment detailing experience and heavy equipment familiarity are assets.

  forklift, wash bay equipment

• 2j

  Plumbing Apprentices - Kamloops

  Kamloops, BC

  28,19–46,13 $/hSur placeTemps plein

  

  Pitt Meadows Plumbing & Mechanical Systems

  Candidates need strong communication and teamwork skills, mechanical aptitude, and the ability to lift 50 lbs and work at heights up to 25 feet. They must be legally entitled to work in Canada and fully vaccinated as required by the client.

  hand tools, power tools, workshop equipment, scissor lifts, ladders, scaffolding

• 2j

  Diesel Truck Technician/Mechanic III (Helper/Apprentice)

  Burnaby, BC

  Temps plein

  

  Penske: Penske Truck Leasing is a Penske Transportation Solutions company headquartered in Reading, Pennsylvania.

  Penske needs candidates with a high school diploma, current enrolment in an apprenticeship program and a class G or class 5 driver's licence. Some vehicle or truck repair experience, hand tool skills and the ability to work in non-climate-controlled conditions are required.

  Hand tools, Power tools, Pneumatic wrenches, Welding equipment, Hydraulic jacks, Hoists

  2j

  Licensed Diesel Truck Technician/Mechanic I

  Mississauga, ON

  Temps plein

  

  Penske: Penske Truck Leasing is a Penske Transportation Solutions company headquartered in Reading, Pennsylvania.

  5+ ansCandidates need 5+ years of tractor trailer maintenance experience and a Red Seal or 310T provincial licence. They also need a class D or class 3 licence with air brake certification, or the ability to obtain it within 6 months, and strong tool proficiency.

  hand tools, power tools, pneumatic wrenches, welding equipment, hydraulic jacks, hoists

  2j

  Licensed Diesel Truck Technician/Mechanic I

  Mississauga, ON

  Temps plein

  

  Penske: Penske Truck Leasing is a Penske Transportation Solutions company headquartered in Reading, Pennsylvania.

  5+ ansPenske needs an experienced, licensed truck technician with 5+ years of tractor-trailer maintenance experience and a Red Seal or 310T licence. Candidates also need a Class D or Class 3 driver's licence with air brake certification, or the ability to get it within 6 months, plus strong tool and diagnostic skills.

  hand tools, power tools, pneumatic wrenches, welding equipment, hydraulic jacks, hoists

• 2j

  (CAN) Stockperson/Cartpusher

  Winnipeg, MB

  Temps partiel

  WC

  Wal-Mart Canada Corp

  Candidates need to be at least 16 years old and able to stand for long periods and lift up to 20 lbs, occasionally 50 lbs. They must follow safety procedures, wear required protective equipment, and be flexible about shifts including overnight, weekends and holidays.

  Power equipment, Shopping carts, Protective equipment

  2j

  (CAN) OMNI Customer Fulfillment Associate

  Cold Lake, AB

  Temps plein

  WC

  Wal-Mart Canada Corp

  Candidates need to be at least 16 years old and able to work a flexible schedule, including evenings, weekends and holidays. The role also needs the ability to stand for long periods, lift up to 20 lbs (occasionally 50 lbs), and handle a fast-paced workload.

  2j

  (CAN) Dairy Frozen Associate

  New Westminster, BC

  Temps partiel

  WC

  Wal-Mart Canada Corp

  Candidates need to be at least 16 years old and able to stand for long periods and lift up to 20 lbs, occasionally 50 lbs. Wal-Mart Canada Corp also expects flexibility to work evenings, weekends and holidays, and comfort with a fast-paced, repetitive workload.

  2j

  (CAN) Dairy Frozen Associate

  New Westminster, BC

  Temps partiel

  WC

  Wal-Mart Canada Corp

  Candidates need to be at least 16 years old and able to stand for long periods and lift up to 20 lbs, occasionally 50 lbs. Wal-Mart Canada Corp also expects flexibility to work evenings, weekends and holidays, and comfort with a fast-paced, repetitive workload.

  2j

  (CAN) OMNI Customer Fulfillment Associate PT

  Salmon Arm, BC

  Temps partiel

  WC

  Wal-Mart Canada Corp

  Wal-Mart Canada needs candidates aged 16 or older who can work a flexible schedule, lift up to 20 lbs (occasionally 50 lbs), and stand for long periods. Candidates should be able to handle a fast-paced workload accurately.

  2j

  (CAN) Cashier

  New Westminster, BC

  Temps partiel

  WC

  Wal-Mart Canada Corp

  Candidates need to be at least 16 years old. Strong customer service skills, attention to detail and careful cash handling are expected.

  EAS

  2j

  (CAN) Préposé au traitement des commandes OMNI

  Québec, QC

  Temps plein

  WC

  Wal-Mart Canada Corp

  Candidates need to be at least 16 years old and comfortable working a fast-paced, flexible schedule. Strong attention to detail, physical stamina for lifting and standing, and friendly customer interaction are important.

  2j

  (CAN) Stock Unloader Associate

  Saint-Laurent, QC

  Temps partiel

  WC

  Wal-Mart Canada Corp

  Candidates need to be at least 16 years old and open to working varied shifts, including evenings, weekends and holidays. The job involves standing for long periods and lifting up to 20 lbs, occasionally up to 50 lbs.

  2j

  (CAN) Grocery Associate

  Windsor, ON

  Temps plein

  WC

  Wal-Mart Canada Corp

  Candidates need to be at least 16 years old and open to varied shifts, including evenings, weekends and holidays. They must follow food safety, sanitation and health and safety rules, and handle physical tasks such as lifting up to 50 lbs.

9 entreprises