Emplois “bench equipment” au Canada – Page 22

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Agent de qualité avionique / Avionics Quality Agent

  Montréal, QC

  Temps plein

  AC

  Airbus Canada Limited Partnership

  5+ ansCandidates need a technical avionics diploma (DEC or AEC) plus 5 years of avionics technician experience, or an E Licence plus 5 years of avionics experience. They must work well in a multidisciplinary team, be comfortable in confined spaces and at heights up to 30 feet, and hold physical positions as needed.

  test benches, recording devices

  1 mois

  Responsable V&V des systèmes de vol automatisés / Autoflight Systems V&V Lead

  Montréal, QC

  Temps plein

  AC

  Airbus Canada Limited Partnership

  10+ ansBaccalauréat ou maîtrise en génie électrique, électronique, logiciel ou aérospatial; Au moins 10 ans d'expérience en V&V de systèmes avioniques; Connaissance des normes 14 CFR Part 25, ARP4754, DO-178, DO-331, DO-254

  Research, Collaboration, Outdoor activities, Electrical engineering, Electronics, Organizational skills

  1 mois

  Agent Méthodes config instal Élec & Avionics / Method Agents Elec & Avionics install

  Montréal, QC

  Temps plein

  AC

  Airbus Canada Limited Partnership

  5+ ansCandidates need 5 to 10 years of experience in electrical and avionics configuration management as a Method Agent, strong SAP skills, and fluent spoken and written French and English. An aeronautics DEC (avionics preferred) or an engineering degree is expected.

  SAP, CATIA V5, 3DVia

  1 mois

  Spécialiste Senior en Conception Mécanique / Senior Specialist in Mechanical Design

  Montréal, QC

  Temps plein

  AC

  Airbus Canada Limited Partnership

  15+ ansCandidates need a mechanical engineering degree, over 15 years of relevant aerospace experience, management experience, and deep structural and mechanical design expertise. CATIA knowledge is mandatory and English is required.

  CATIA

  1 mois

  Spécialiste en Ingénierie Systèmes des bancs d’essai / Test Bench System Engineering Specialist

  Montréal, QC

  Temps plein

  AC

  Airbus Canada Limited Partnership

  10+ ansCandidates need an engineering degree in electrical or mechanical engineering, or an equivalent technical background, plus more than 10 years of relevant experience. Test bench instrumentation and design expertise, English, and system integration skills are required, with AutoCAD and A220 experience as assets.

  AutoCAD

  1 mois

  Professionnel en conception des systèmes de vol automatisés / Autoflight Systems Design Professional

  Montréal, QC

  Temps plein

  AC

  Airbus Canada Limited Partnership

  8+ ansDiplôme universitaire en génie logiciel, aérospatial, électrique ou électronique; Au moins 8 ans d'expérience en conception logicielle avionique embarquée; Maîtrise des systèmes de guidage, pilote automatique et auto-man

  SCADE, MATLAB Simulink, Git, GitHub, Jira, Jenkins

  1 mois

  Spécialiste en V&V des Commandes de Vol Primaires / Primary Flight Control V&V Specialist

  Montréal, QC

  Temps plein

  AC

  Airbus Canada Limited Partnership

  5+ ansBaccalauréat en génie mécanique, électrique ou aérospatial, plus de 5 ans d'expérience; Connaissance de ARP4754, RTCA DO-160 et DO-178; Familiarité avec FAR 25 / CAR 525

  Matlab, Simulink, Iron Bird

  1 mois

  Intégrateur.trice Système d'Air, Ingénierie / Air System Integrator, Engineering

  Montréal, QC

  Temps plein

  AC

  Airbus Canada Limited Partnership

  5+ ansCandidates need a bachelor's degree in mechanical or aerospace engineering or a related field and at least five years of aircraft systems experience. Strong knowledge of air systems, familiarity with FAR 25/CAR 525 certification, and professional fluency in English and French are required.

  Research, Vendor management, Pneumatics, Collaboration, Outdoor activities, Assembly

• 1 mois

  VP Nuclear Island - Monark

  Mississauga, ON +1

  Temps plein

  CE

  Candu Energy Inc.

  15+ ansCandidates need 15 to 20+ years of delivering major nuclear or highly regulated projects, with hands-on CANDU experience. Strong knowledge of nuclear quality standards, project controls, risk management, and EPC contract claims is required, along with an engineering degree and proven people leadership.

  Estimating, Regulatory compliance, Financial reporting, Forecasting, Health and safety, Procurement

  1 mois

  Metallurgical Technician

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  Candidates need knowledge of metallurgy, welding inspection and ASTM testing standards, plus hands-on skill with inspection and testing equipment. A metallurgy diploma is preferred, and LPI, UT or MT certification is an asset.

  inspection and testing equipment, autoclaves, word-processing applications

• 1 mois

  Area Operations Manager - Ready Mix Concrete

  Ottawa, ON

  Temps plein

  HM

  Heidelberg Materials Canada Holding Limited

  Maîtrise du français et de l'anglais requise; Expérience de leadership opérationnel dans le béton préparé; Solides capacités d'analyse et de résolution de problèmes

  SAP, heavy equipment, batch plant

• 1 mois

  Test Specialist - PCL

  Calgary, AB

  Temps plein

  CC

  (CAN) CoolIT Systems Inc.

  3+ ansCandidates need a Bachelor's degree in Mechanical Engineering or a related field, at least 3 years of testing experience, and SolidWorks and instrumentation skills. Experience with DAQ systems and electromechanical testing is also required.

  SolidWorks, DAQ, oscilloscope, power analyzer, logic analyzer, multimeter

  1 mois

  Test Technologist

  Calgary, AB

  Temps plein

  CC

  (CAN) CoolIT Systems Inc.

  CoolIT needs candidates with a diploma or degree in electrical, electronics, mechanical or a related field, plus hands-on experience with instrumentation and bench test tools. Strong data analysis, root cause analysis and programming skills in Python or C/C++ are also required.

  Oscilloscope, Power analyzer, Logic analyzer, Multimeter, DAQ, SolidWorks

• 1 mois

  Systems Engineer

  Canada

  80k–105k $/anTemps plein

  PC

  Photon Control Inc.

  2+ ansCandidates need a bachelor's or master's degree in engineering, at least 2 years of related experience, and hands-on skill with SolidWorks and data analysis. Strong communication and a safety-conscious, self-starting approach are also required.

  SolidWorks, MATLAB, JMP, Minitab, LabVIEW, Python

• 1 mois

  Environmental Engineer-in-Training (Hybrid)

  Calgary, AB

  74k–78k $/anHybrideTemps plein

  BE

  Barr Engineering and Environmental Science Canada Ltd

  1+ ansCandidates need a bachelor's degree in environmental, civil, geological, mining or chemical engineering or a related field, a minimum 3.0 GPA, strong Microsoft Office skills, and a valid driver's licence. They must be legally authorized to work in Canada without sponsorship, and be able to do field work in remote, rough and industrial conditions.

  Microsoft Office, Pickup truck, Environmental monitoring and sampling equipment, Heavy equipment

• 1 mois

  Production Operator

  Penetanguishene, ON

  Temps plein

  

  Techform, a Division of Magna Closures Inc.

  the posting focuses on the ability to perform repetitive assembly and basic equipment adjustment. Hiring is based on experience and qualifications relevant to the job.

  assembly bench

• 1 mois

  Applications Engineering Intern

  Burlington, ON

  26–28,50 $/hTemps plein

  S

  Semtech_Canada_Corporation

  Candidates need a self-motivated, independent working style, solid analogue and digital circuit knowledge, and PCB troubleshooting experience (preferred). Soldering skill, CAD tool familiarity, strong organization, and clear written and spoken communication are also needed.

  BERT, VNA, WFM, oscilloscope, SAP, CAD tools

  1 mois

  Applications Engineering Intern

  Burlington, ON

  Temps plein

  S

  Semtech_Canada_Corporation

  Semtech Canada Corporation needs candidates who can work independently, understand analogue and digital circuits, and solder. Troubleshooting PCBs, CAD tools and strong communication and organization skills are also needed.

  BERT, VNA, oscilloscope, SAP, CAD tools, soldering equipment

• 1 mois

  Test Engineer - Mechanical

  Canada

  Temps plein

  VI

  Vaderstad Industries Inc (VII)

  Candidates need an engineering bachelor's degree in mechanical, agricultural or electrical disciplines, eligibility for APEGS or SASTT registration, and experience with CAD such as Autodesk Inventor. Strong troubleshooting, data analysis, hand tool use and clear communication are also needed.

  Autodesk Inventor, hand tools, large machinery, data logging equipment

• 1 mois

  Cleaner (Part-Time) - Yorkdale Shopping Centre

  Canada

  22,42 $/hTemps partiel

  OM

  OPGI Management Limited Partnership

  Candidates need strong customer service and communication skills, knowledge of WHMIS, and the ability to stand and walk for long periods and lift loads. Prior housekeeping experience is an asset, and availability must include at least 3 shifts per week, including weekends.

  Reporting, Cleaning, Housekeeping, Customer service, Communication skills, WHMIS

• 1 mois

  Director Mechanical Engineering

  Toronto, ON

  HybrideTemps plein

  ET

  ecobee Technologies ULC

  10+ ans5+ gestionCandidates need 10+ years of consumer or industrial product development experience and 5+ years of technical leadership, plus a mechanical, mechatronics or biomedical engineering degree or equivalent practical experience. They must be strong in CAD, DFM/DFA and tolerance analysis, and have experience with manufacturing processes, product validation and Asian high-volume suppliers.

  CAD

• 1 mois

  Technical Staff Engineer–Applications

  Burnaby, BC

  107k–226k $/anTemps plein

  MS

  MCHP Semiconductor Canada ULC

  12+ ansCandidates need a bachelor's degree in electrical engineering, computer science or computer engineering and 12+ years of industry experience. Strong PCIe, C/C++ and firmware debugging skills and customer-facing technical support experience are required.

  Switchtec, WinDbg, JTAG, protocol analyzer, logic analyzer, oscilloscope

  1 mois

  Technical Staff Engineer-Applications

  Burnaby, BC

  86k–186k $/anTemps plein

  MS

  MCHP Semiconductor Canada ULC

  8+ ansCandidates need a bachelor's degree in electrical engineering, computer science or computer engineering and 8+ years of industry experience. Required skills include PCIe, C/C++ firmware and driver development, embedded RTOS work, lab debugging and customer-facing technical support.

  Protocol analyzer, Logic analyzer, Oscilloscope, Multimeter, WinDbg, JTAG tools

• 1 mois

  Mechanic Service Person

  Winnipeg, MB

  Temps plein

  

  Canada Goose Inc.

  2+ ansCandidates need at least 2 years of experience operating and maintaining sewing equipment, plus a high school diploma or GED. A building trades certificate is an asset, along with power tool use, knowledge of the Occupational Health and Safety Act and Fire Code, and strong communication skills.

  Power tools, Hand tools, Electric meters, Material handling equipment, Sewing machines

13 entreprises