Emplois “electronic drawings” au Canada – Page 24

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 26j

  Assembly Technician

  Montréal, QC

  Temps plein

  

  Puzzle Medical Devices: Canadian-based medical device company building world's first minimally invasive heart pump for patients with advanced heart failure.

  3+ ansCandidates need over 3 years of assembly or manufacturing experience, ideally in a regulated industry. They must read technical drawings, use hand tools and test equipment, and have strong attention to detail.

  hand tools, assembly equipment, testing and inspection tools

• 26j

  Instrumentation Technician

  Ontario

  Temps plein

  TO

  The Ottawa Hospital: The Ottawa Hospital is one of Canada’s largest learning and research hospitals, with more than 1,100 beds, approximately 12,000 staff members and an…

  5+ ansCandidates need a two-year instrumentation college diploma and five years of hands-on control work within the last ten years. They must read schematics and manuals, communicate well in English and French, and be eligible to work in Canada.

  test equipment, building automation system

• 26j

  Industrial Electrician

  British Columbia

  AE

  Apex Extrusions Ltd

  4+ ansCandidates need a Red Seal or four years of industrial electrical experience, and must be able to read blueprints, schematics and electrical code. They also need strong troubleshooting, PLC-style wiring and ladder-logic knowledge, the ability to lift 50 lbs, and solid English communication.

  Testing devices, Diagnostic tools, MS Office

• 26j

  Technical Writer

  Calgary, AB

  Temps plein

  

  RTX

  3+ ansCandidates need post-secondary education in a technical field, English, technical writing or communications, plus at least 3 years producing technical publications, ideally in aerospace. Strong XML, S1000D and MS Office skills are needed; French and a Government of Canada security clearance are assets or requirements.

  MS Office, Word, Excel, PowerPoint, XML authoring environment, EAGLE Publishing System

• 26j

  Senior HR Business Partner

  Kitchener, ON

  WR

  Waterloo Regional Health Network

  10+ ansCandidates need a bachelor's degree in business or HR, at least 10 years of HR experience in a large, complex organization, and executive-level HR support experience. Strong knowledge of labour law and the ability to influence decisions with data are also required.

  Collaboration, Leadership, Patient care, Business model, Performance management, Business intelligence

• 26j

  HVAC Mechanic 1 (afternoon shift)

  Coquitlam, BC

  46,55 $/hTemps plein

  SD

  School District #43 (Coquitlam)

  3+ ansCandidates need a BC Certificate of Trades Qualification in HVAC/Refrigeration, a Class B gas fitting ticket, at least three years of HVAC maintenance experience including two years on DDC systems, and a valid BC Class 5 driver's licence. Strong troubleshooting skills and the ability to work with minimal supervision are required.

  boilers, pneumatic controls, thermostats, power tools

  26j

  HVAC I Mechanic

  Coquitlam, BC

  46,55 $/hTemps plein

  SD

  School District #43 (Coquitlam)

  3+ ansCandidates need a BC Certificate of Trades Qualification in HVAC/Refrigeration, a Class B gas fitting ticket and at least three years of HVAC maintenance experience, including two years on DDC systems. They must work with minimal supervision, troubleshoot well and hold a valid BC Class 5 driver's licence.

  DDC controls, boilers, thermostats, power tools

  26j

  HVAC Mechanic II

  Coquitlam, BC

  47,32 $/hTemps plein

  SD

  School District #43 (Coquitlam)

  3+ ansSchool District 43 needs a BC Certificate of Trades Qualification in plumbing, refrigeration or HVAC, a Class A gas fitting ticket, at least three years of HVAC maintenance experience including two years on DDC systems, and a valid BC Class 5 licence.

  DDC systems, boilers, power tools

  26j

  MECHANICAL TECHNOLOGIST (DDC Technician)

  Coquitlam, BC

  40,77 $/hTemps plein, Contrat

  SD

  School District #43 (Coquitlam)

  3+ ansCandidates need a Mechanical Engineering Technology diploma with a strong emphasis on DDC systems, plus three years of recent DDC and HVAC controls experience, or five years with manufacturer training. A valid BC Class 5 driver's licence is required.

  DDC systems, computer systems, drills, meters, power tools

• 26j

  Electrician

  Nanaimo, BC

  36,78 $/hTemps plein

  NL

  Nanaimo Ladysmith Public Schools

  2+ ansCandidates need a Red Seal electrician certification, two years of journeyman experience and a valid B.C. Class 5 driver's licence. They must read drawings and specifications, work with minimal supervision and meet the physical demands of the job.

  Power tools, Test equipment

• 26j

  Journeyman - DDC

  Abbotsford, BC

  Temps plein

  

  Abbotsford School District

  3+ ansCandidates need a Grade 12 diploma and a BC or Interprovincial Electrical trades qualification with strong DDC experience, plus at least 3 years of recent HVAC controls and DDC work. A valid Class 5 BC driver's licence, Microsoft Office skills, WHMIS and WorkSafe BC knowledge, and physical capability are also required.

  Microsoft Office, computer systems, web server, notebook and desktop computers, motors, variable frequency drives

• 26j

  Senior Field Services Engineering Support Specialist

  Etobicoke, ON +1

  HybrideTemps plein

  SM

  S&C Minimal

  4+ ansCandidates need an electrical or electronics engineering technology diploma and about 4 years of similar support experience. Strong written and verbal communication, the ability to read wiring and mechanical drawings, and medium voltage protection knowledge are preferred.

  Salesforce, Wiring diagrams

• 26j

  Maintenance Specialist

  Thunder Bay, ON

  Sur placeTemps plein

  C

  Chrysos

  Candidates need demonstrated experience maintaining technical equipment, a strong safety mindset, customer service skills, willingness to travel including to remote mine sites, good written and verbal communication, valid Canadian work rights and a current driver's licence. An engineering diploma and fault-finding experience are assets.

  PhotonAssay, MS Office

• 26j

  Electrician

  Grande Cache, AB

  Sur placeTemps plein

  CC

  CST Coal

  1+ ansCandidates need a Journeyman Industrial Electrician trade certificate issued in Alberta or a recognized equivalent, plus at least one year of industrial electrical experience. Surface mining mobile equipment experience in a coal mining environment is preferred, and standard first aid with CPR is an asset.

  test equipment

• 26j

  Senior Mechanical Designer

  Vancouver, BC

  Temps plein

  

  Avigilon Corporation

  3+ ansCandidates need a bachelor's degree and at least 3 years of mechanical engineering experience. Proficiency in CREO or SolidWorks, injection molding, die casting, sheet metal and machining design, and FEM analysis is needed.

  CREO, SolidWorks, CAE tools

• 26j

  Security Project Manager

  Toronto, ON

  90–115 $/anTélétravail

  

  Wachter, Inc.: SERVICE: Through TRUST.Wachter.com, Wachter’s service center provides 24/7/365 support that is customized for each client’s specific needs.

  5+ ansCandidates need 5+ years of project management in security, low-voltage, fire alarm or electrical work, with proven delivery of CCTV and access control projects. They must read construction drawings and contracts, manage budgets, and hold a valid driver's licence.

  Microsoft Office, Project management software

• 26j

  Technologist 2 - Instrumentation & Communication

  Penticton, BC

  

  FortisBC: FortisBC is a Canadian-owned company based in British Columbia.

  2+ ansCandidates need a post-secondary electronics engineering technology diploma, an IN or LO Accredited Representative certification from BC Electrical Branch (or within one year of starting), and two years of directly related experience. Strong communication, independent project leadership and a valid BC driver's licence are required.

  gas testing equipment, SCADA, telemetry equipment, measurement installations, application software

• 26j

  Controls Engineer Midnights

  Windsor, ON

  AA

  Avancez Assembly

  2+ ansCandidates need at least 2 years of automotive manufacturing or assembly experience, strong troubleshooting skills, and experience with Allen-Bradley Studio 5000, Siemens STEP 7, PLC programming and ladder logic. Experience programming FANUC robots and COGNEX cameras and fluent English are also required.

  Allen-Bradley Studio 5000, Siemens STEP 7, FANUC robots, COGNEX cameras, Phoenix PC Works, RSView

• 26j

  Electrician Journeyman

  Abbotsford, BC

  Temps plein

  

  Silver Hills Bakery

  1+ ansCandidates need at least one year of relevant experience and Red Seal certification. They also need strong computer skills in MS Office, good math and mechanical skills, and clear verbal and written communication.

  MS Office

• 26j

  Electrical Controls Engineer

  Oakville, ON

  Temps plein

  

  Thermon: Through its global network, Thermon provides safe, reliable and innovative mission critical industrial process heating solutions.

  5+ ansCandidates need 5+ years of hands-on electrical engineering experience and a bachelor's degree in electrical engineering. They need knowledge of industrial control systems, PLC programming, SCADA, instrumentation, and industrial networking, plus familiarity with CSA, UL and IEC standards.

  AutoCAD Electrical, SEE Electrical, PLC, HMI, SCADA

• 26j

  Electrical Engineer

  Calgary, AB

  HybrideTemps plein

  

  Stantec

  8+ ansCandidates need a Bachelor's in Electrical Engineering, a P.Eng. licence and 8+ years of consulting engineering experience. Strong knowledge of the Canadian Electrical Code, power systems from 120V to 44kV, and clear communication are required.

  ETAP, SKM, EasyPower, AutoCAD, Revit

• 26j

  Maintenance Licensed - Electrician

  Georgetown, ON

  Sur placeTemps plein

  DS

  DPC Saputo Dairy Products Canada G.P.

  3+ ansCandidates need a 442A Industrial Electrician certificate and a Red Seal certification, plus at least 3 years of electromechanical and PLC experience in industrial or manufacturing settings. Food or dairy experience, GMP knowledge and strong troubleshooting skills are needed, and candidates must be able to work all shifts, including weekends, overtime and on call.

  PLC, Allen Bradley, PC Windows

• 26j

  HVAC Journeyperson Technician

  North Bay, ON

  Temps plein

  

  Black & McDonald Limited: Black & McDonald is an integrated, multi-trade service provider that safely delivers high-quality construction, facilities management, and technical…

  3+ ansCandidates need 3 or more years as a Journeyman HVAC Technician, a valid 313A refrigeration certificate, a G1 licence, an Ozone Depletion Prevention certificate, and a valid G driver's licence. BAS and blueprint-reading experience are also needed.

  BAS, CMMS, blueprints, HVAC/R schematics

• 26j

  Halton Hills Hydro | Senior Engineering Technologist / Technician (Hybrid)

  Acton, ON

  43,88–54,89 $/h

  

  The MEARIE Group

  5+ ansCandidates need at least five years in electrical distribution design, including three years on residential subdivisions. They must hold C.Tech. or C.E.T. registration with OACETT, a 2 or 3-year electrical technology diploma, proficiency in AutoCAD and Microsoft Office, and a valid Ontario Class G licence.

  AutoCAD, Microsoft Office, SpidaCalc, GIS

21 entreprises