Emplois “machine shop equipment” au Canada – Page 27

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 27j

  Technician

  Thunder Bay, ON

  Temps plein

  GE

  GFL Environmental Services Inc.

  Candidates need a valid driver's licence and the physical fitness to lift over 50 lbs and stand on concrete for long periods. Experience with skid steers, loaders, excavators or forklifts is an asset, along with good communication, organization and problem-solving skills.

  skid steer, loader, excavator, forklift

  27j

  Apprentice Truck Mechanic

  Greater Sudbury, ON

  Temps plein

  GE

  GFL Environmental Services Inc.

  3+ ansCandidates need a valid Ontario 310T Truck and Coach Technician Certificate or registration as a Level 3 apprentice with Skilled Trades Ontario, plus 3 to 5 years of work experience and a valid driver's licence. They also need strong troubleshooting, documentation and communication skills, and the physical ability to lift 50 pounds.

  hand tools, diagnostic equipment, shop equipment, M5 inventory program

• 27j

  Senior Welder / Fabricator

  British Columbia

  Temps plein

  

  AWC Process Solutions Ltd.: AWC Water Solutions designs, manufactures, and integrates water and wastewater treatment systems for a variety of municipal and industrial…

  3+ ansCandidates need at least 3 years of fabrication and welding experience, including 2 years as a junior fabricator or welder, plus a trade school education or equivalent experience. CWB or ASME certifications are required as applicable, and they must be able to read weld symbols and work with minimal supervision.

  forklift, hoist, grinder, cutting torch, hand power tools, rigging

  27j

  Senior Industrial Process and Automation Control Specialist

  Langley, BC +1

  Temps plein

  

  AWC Process Solutions Ltd.: AWC Water Solutions designs, manufactures, and integrates water and wastewater treatment systems for a variety of municipal and industrial…

  10+ ansCandidates need 10+ years of industrial controls experience, post-secondary training in automation and instrumentation, and hands-on PLC programming across several platforms. Strong communication, problem-solving and leadership skills are also required.

  Rockwell ControlLogix, CompactLogix, FactoryTalk View Studio, Siemens S7, TIA Portal, WinCC

  27j

  Intermediate Welder / Fabricator

  Langley, BC

  Temps plein

  

  AWC Process Solutions Ltd.: AWC Water Solutions designs, manufactures, and integrates water and wastewater treatment systems for a variety of municipal and industrial…

  3+ ansCandidates need at least 3 years of fabrication and welding experience, including 2 years as a junior fabricator or welder, plus a high school diploma and trade school or equivalent. CWB and ASME certifications are required where applicable.

  forklift, hoist, grinder, cutting torch, hand power tools, rigging

  27j

  Intermediate Industrial Process and Automation Control Specialist

  Langley, BC +1

  Temps plein

  

  AWC Process Solutions Ltd.: AWC Water Solutions designs, manufactures, and integrates water and wastewater treatment systems for a variety of municipal and industrial…

  5+ ansCandidates need 5 to 10 years of hands-on experience with PLC, HMI and SCADA systems and industrial networks, and post-secondary training in automation and instrumentation. Experience with Rockwell platforms is preferred, and water or wastewater plant experience is an asset.

  ControlLogix, CompactLogix, FactoryTalk View Studio, Siemens, CODESYS, Schneider

  27j

  Industrial Process and Automation Control Technician

  Langley, BC

  Temps plein

  

  AWC Process Solutions Ltd.: AWC Water Solutions designs, manufactures, and integrates water and wastewater treatment systems for a variety of municipal and industrial…

  3+ ansCandidates need 3 to 5 years of industrial control experience, including PLC programming and field service. Post-secondary training in automation and instrumentation, and experience with Rockwell PLCs, FactoryTalk View HMIs and SCADA are preferred.

  Rockwell ControlLogix, Rockwell CompactLogix, FactoryTalk View Studio, SCADA, VFD

  27j

  Electrical Design Technologist

  Langley, BC +1

  Temps plein

  

  AWC Process Solutions Ltd.: AWC Water Solutions designs, manufactures, and integrates water and wastewater treatment systems for a variety of municipal and industrial…

  5+ ansAWC Process Solutions needs candidates with 5+ years of industrial electrical design experience and 3+ years in AutoCAD Electrical. A technical diploma or degree in CAD or electrical engineering is preferred, and knowledge of CEC, NEC and IEC standards is required.

  AutoCAD, AutoCAD Electrical

• 27j

  Maintenance Licensed - Electrician

  Georgetown, ON

  Sur placeTemps plein

  DS

  DPC Saputo Dairy Products Canada G.P.

  3+ ansCandidates need a 442A Industrial Electrician certificate and a Red Seal certification, plus at least 3 years of electromechanical and PLC experience in industrial or manufacturing settings. Food or dairy experience, GMP knowledge and strong troubleshooting skills are needed, and candidates must be able to work all shifts, including weekends, overtime and on call.

  PLC, Allen Bradley, PC Windows

• 27j

  Production Worker - Steel Fabrication (Days)

  Edmonton, AB

  Temps plein

  

  Powell

  1+ ansCandidates need a high school diploma, basic English, and the ability to read a tape measure with unit conversions. One to two years of metal fabrication shop experience and safety certifications are assets.

  forklift, pallet jack, crane, air grinder, electric grinder, sander

  27j

  Journeyman Welder - SWGR (Nights)

  Edmonton, AB

  Temps plein

  

  Powell

  Candidates need a valid Red Seal or Interprovincial Journeyman Welder certification, overhead crane and forklift experience, and the ability to read shop drawings and welding symbols. Basic English and legal authorization to work in Canada are required.

  CC welding machine, CV welding machine, plasma cutter, band saw, Mag drill, grinder

• 27j

  Senior Welding Engineer, Nuclear Fabrication 1

  Cambridge, ON

  

  BWXT

  10+ ansCandidates need a mechanical, metallurgical or materials engineering degree, a P.Eng. designation and at least 10 years in fast-paced manufacturing. Experience with regulatory codes such as ASME and CNSC, plus leadership skills, is required; nuclear industry experience is strongly preferred.

  AutoCAD, SolidWorks, Microsoft Office

• 27j

  Millwright

  Toronto, ON

  41,25–43,50 $/hTemps plein

  QT

  QuickHires Talent Solutions Inc

  2+ ansCandidates need a Red Seal Industrial Millwright 433A licence, 2-5 years of industrial mechanical experience (food industry preferred), and hands-on skill with pneumatics, hydraulics and machine shop work. They also need problem-solving and communication skills, comfort with computers, and the ability to lift up to 50 lbs and work rotating shifts.

  Lathe, Welding equipment, Hand and power tools

  27j

  Maintenance Mechanic (Automotive)

  Toronto, ON

  Temps plein

  QT

  QuickHires Talent Solutions Inc

  3+ ansCandidates need a Certificate of Qualification 433A (Industrial Mechanic Millwright) through an apprenticeship and at least 3 years of industrial maintenance experience. Hydraulic steam press experience is highly preferred, along with strong problem solving and shift communication.

  Shop machines, Blueprints and drawings, Welding equipment

• 27j

  Journeyman Automotive Technician

  Calgary, AB

  70k–90k $/an

  TG

  The Gentlemen Pros

  1+ ansCandidates need a Red Seal journeyman automotive certification and at least 1-2 years of fleet, small-engine or mechanical repair experience. Plumbing equipment experience, a valid Class 5 Alberta licence and a clean criminal record check are also needed. Strong troubleshooting skills and the ability to work independently are essential.

  pressure washer, drain cleaning machine, plumbing auger, generator, pump, power tools

• 27j

  Millwright

  Delta, BC

  35–45 $/hTemps plein

  

  Boundary Mining Group

  3+ ansCandidates need a millwright background or equivalent, plus three or more years working as a technician in a hydraulic shop. They should understand industrial controls, read engineering drawings and schematics, and have welding, machining and piping skills.

  hydraulic pumps, hydraulic cylinders, hydraulic motors, hydraulic valves, welding equipment, machining equipment

  27j

  Shop Helper

  Port Coquitlam, BC

  25–30 $/hTemps plein

  

  Boundary Mining Group

  Candidates need a valid Class 5 driver's licence and experience moving parts with a forklift and overhead crane. Strong communication, mechanical aptitude, dependability and experience in a fast-paced environment are expected, with painting experience and crane certification as assets.

  forklift, overhead crane

  27j

  General Shop Labourer – Precision Manufacturing

  Delta, BC

  22,26 $/hTemps plein

  

  Boundary Mining Group

  Candidates need a high school diploma or equivalent, reliability and a safety-first attitude. They must be able to stand, walk, bend and lift up to 50 pounds, and a forklift certificate is an asset.

  Forklift, Pallet jack, Overhead crane

  27j

  Honing Technician

  Port Coquitlam, BC

  34–44 $/hTemps plein

  

  Boundary Mining Group

  3+ ansCandidates need several years of honing experience, ideally on hydraulic cylinders. They must read drawings, use precision measuring tools, fix bore defects, and rig large parts with overhead cranes.

  honing machine, overhead crane, precision measuring equipment

  27j

  Manual Machinist

  Port Coquitlam, BC

  36–44 $/hTemps plein

  

  Boundary Mining Group

  5+ ansBridge Machine needs a machinist with 5+ years of manual machining experience, strong manual lathe and mill skills and the ability to read engineering drawings. Hydraulic cylinder repair experience, overhead crane rigging and a Red Seal certification are assets rather than requirements.

  manual lathe, manual mill, boring equipment, micrometers, calipers, bore gauges

  27j

  Shop & Finishing Technician

  Port Coquitlam, BC

  27–32 $/hTemps plein

  

  Boundary Mining Group

  Candidates need attention to detail, a strong safety focus and the ability to lift up to 50 lbs. Manufacturing, paint or shop experience, forklift or crane certification, and shipping/receiving skills are assets, and training is offered for some technical tasks.

  forklift, overhead crane

  27j

  Quality Control Inspector

  British Columbia

  

  Boundary Mining Group

  Candidates need working knowledge of GD&T, the ability to read engineering drawings, and hands-on experience with precision measuring tools such as micrometers and calipers. A technical background in machining or manufacturing and good written English are required; CMM experience is not.

  Micrometers, Calipers, Height gauges, Bore gauges, Thread gauges, Coordinate Measuring Machine

  27j

  Production & Operations Coordinator

  Port Coquitlam, BC

  Temps plein

  

  Boundary Mining Group

  3+ ansBridge Machine needs 3 to 5 or more years of experience in a manufacturing, machining, fabrication or industrial setting. Candidates should be organized, comfortable communicating with customers, suppliers and shop staff, and skilled in Excel, Outlook and ERP or MRP systems. Forklift and overhead crane experience is an asset.

  ERP/MRP systems, Microsoft Excel, Microsoft Outlook, Forklift, Overhead crane

  27j

  Shop Helper

  North Vancouver, BC

  22–27 $/hTemps plein

  

  Boundary Mining Group

  Candidates need a Class 5 driver's licence and experience with basic hand and power tools. Forklift, overhead crane and mechanical experience are assets, and attention to detail and dependability are essential.

  forklift, overhead crane, bandsaw, zipcut

8 entreprises