Emplois “pipe tools” au Canada – Page 27

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 24j

  Labourer

  Camrose, AB

  Temps plein

  IP

  Interpro Pipe & Steel Inc.

  Candidates need no prior experience, though manufacturing or production work is an asset. They must be able to handle moderate to heavy lifting and push or pull up to 50 pounds, work 12-hour and rotating shifts, wear full protective equipment and have reliable transportation.

  hand tools, power tools, gas torch, measuring devices, steel pipe production equipment

  25j

  Safety Supervisor

  Regina, SK

  Temps plein

  IP

  Interpro Pipe & Steel Inc.

  3+ ans3+ gestionCandidates need a Grade 12 diploma or equivalent and 3 to 5 years of safety management or supervisory experience, ideally in manufacturing, industrial or construction. Strong knowledge of provincial regulations, safety management systems and safety software is needed, and an OHS or CRSP-type designation is preferred.

  Safety software

• 24j

  Laborer

  Ontario

  

  GFL Environmental: GFL Environmental is the only major diversified environmental services company in North America offering services in solid waste management, liquid…

  2+ ansCandidates need 2-5 years of industrial cleaning and maintenance experience, ideally with vacuum trucks, water blasting or liquid waste. Confined space entry, respirator use and a Class G licence are required or valued.

  vacuum truck, power washer, forklift, aerial boom lift, scissor lift, excavator

  24j

  Laborer

  Ontario

  

  GFL Environmental: GFL Environmental is the only major diversified environmental services company in North America offering services in solid waste management, liquid…

  2+ ansGFL Environmental needs candidates with 2-5 years of industrial cleaning and maintenance experience, preferably including vacuum trucks, water blasting or liquid waste work. A Class G licence is required, and experience with confined spaces, respirators, lift tickets or heights work is an asset.

  Forklift, Power washer, Vacuum truck, Utility trailer, Excavator, Bobcat

• 24j

  Corporate Controller

  Burnaby, BC

  

  Novarc Technologies Inc: Novarc Technologies is a full-stack robotics company specializing in the design and manufacturing of cobots and AI systems for robotic welding…

  5+ ans3+ gestionCandidates need an active CPA, knowledge of ASPE and IFRS, and at least 5 years of post-CPA finance experience including 3 years as a Controller. Experience scaling a company's revenue, working in tech manufacturing or hardware, and using NetSuite and advanced Excel is expected.

  NetSuite, Excel

• 24j

  Multi-Service Worker - Regular PT 170H26

  Comox, BC

  25,82 $/hTemps partiel

  

  Providence Living

  Candidates need Grade 10 or an equivalent mix of education, training and experience. They must communicate clearly, work well with others, organize their work, operate housekeeping equipment and be physically able to do the duties.

  floor buffing equipment, dishwashing machine, pot washing machine, step ladder, meal service wagon, wet mop

• 24j

  Lead Estimator

  Calgary, AB

  Sur placeTemps plein

  

  FLINT Corp.: FLINT is a leading provider for Maintenance & Turnarounds, Wear Technologies, Fabrication, Modularization & Machining, Facility Construction,…

  8+ ansCandidates need an engineering degree or technical diploma and at least 8 years of estimating experience on piping, structural, civil or pipeline projects. Strong leadership skills and advanced proficiency in estimating software and Microsoft Office are also required.

  Microsoft Office, estimating software

• 25j

  CNC Machinist

  Edmonton, AB

  25 $/hContrat

  

  Randstad Canada

  Candidates need hands-on experience setting up or running CNC machinery in a shop setting. They should be practical with measuring tools such as calipers, micrometers and gauges, and have a strong eye for quality control.

  CNC machinery, Calipers, Micrometers, Gauges

• 25j

  Senior CAD Designer

  Calgary, AB

  TélétravailTemps plein

  

  RRC POWER AND ENERGY

  5+ ansCandidates need 5 to 7 years of advanced AutoCAD Civil 3D and GIS experience leading civil design projects, plus a bachelor's degree in engineering, drafting, design or a related field. RRC asks for strong Microsoft Office skills and attention to detail.

  AutoCAD Civil 3D, GIS, Microsoft Office Suite, Vehicle Tracking

  25j

  Senior CAD Designer

  Calgary, AB

  TélétravailTemps plein

  

  RRC POWER AND ENERGY

  5+ ansCandidates need 5 to 7 years of high-level experience in AutoCAD Civil 3D and GIS tools with a record of leading complex civil design projects, plus a bachelor's degree in engineering, drafting/design or a related field (equivalent experience may be considered). A valid U.S. driver's licence is required, and renewable energy or oil and gas experience is an asset.

  AutoCAD Civil 3D, GIS, Microsoft Office Suite, Vehicle Tracking

• 25j

  Principal Post-Silicon Validation Engineer

  Ottawa, ON

  CC

  Celero Communications, Inc.

  8+ ansCandidates need 8+ years of post-silicon validation or chip bring-up experience, a degree in electrical or computer engineering or computer science, and strong Python skills. Hands-on use of lab instruments and knowledge of high-speed interfaces such as PCIe and Ethernet are required.

  oscilloscope, BERT, protocol analyzer, network analyzer, logic analyzer, Ethernet traffic generator

• 25j

  Principal Waste-to-Energy Engineer

  Calgary, AB +9

  Temps plein

  W

  WSP

  15+ ansWSP needs candidates with 15+ years in engineering or energy projects and 10+ years in waste-to-energy, biomass, or heavy thermal facilities. Candidates need deep knowledge of conversion technologies, emissions regulation, and relationship-building skills.

  thermal modelling tools

• 25j

  Tuyauteur(se) - Pipefitter

  Montréal, QC

  Sur placeTemps plein

  

  CAD Railway Industries: In 2017, CAD strengthened its national reach by acquiring Calgary-based Caltrax Inc., Western Canada’s only independent rail repair services…

  Anglais fonctionnel, parlé et lu; Habileté à lire des plans et schémas; Calculs de base

  tuyaux de cuivre, outils manuels, outils mécaniques

• 25j

  Field Services Technician (Journeyperson Electrician)

  Alberta

  HybrideTemps plein

  

  Sky Eye Measurement Inc.

  3+ ansCandidates need 3 to 7 years of field experience with mechanical and electrical systems and a Journeyperson certification, with Red Seal preferred. A valid Class 5 licence with a clean abstract, a valid passport and the ability to travel frequently are required.

  Digital diagnostic tools, Toptech HMI, Siemens PLC, Scully overfill system, Dixon grounding system, Service truck

• 25j

  Lead Electrical Engineer

  Sarnia, ON

  HybrideTemps plein

  W

  Worley: Worley is a global professional services company of energy, chemicals and resources experts headquartered in Australia.

  15+ ansCandidates need 15+ years of electrical engineering experience, ideally in process industries or brownfield plants, plus a Bachelor's in Electrical Engineering and a P.Eng. licence in Ontario. Strong knowledge of power systems, CSA/Ontario codes and electrical analysis tools is required.

  ETAP, SKM PowerTools, EasyPower, CDEGS

  25j

  Lead Electrical Engineer

  Sarnia, ON

  Temps plein

  W

  Worley: Worley is a global professional services company of energy, chemicals and resources experts headquartered in Australia.

  15+ ansCandidates need 15+ years of electrical engineering experience, ideally in process industries or brownfield plants, plus a Bachelor's in Electrical Engineering and a P.Eng. licence in Ontario. Strong knowledge of power systems, CSA/Ontario codes and electrical analysis tools is required.

  ETAP, SKM PowerTools, EasyPower, CDEGS

• 25j

  Design & Estimation Technician/Technicien en conception et estimation

  Farnham, QC

  Temps plein

  

  Flexpipe

  Connaissances de base en génie mécanique (atout); Excellente maîtrise de l'anglais et du français, parlé et écrit; Créativité et goût pour trouver et mettre en œuvre des solutions

  SketchUp, Flexpipe modular system

• 25j

  Specialist, Health, Safety and Environment***Spécialiste, Santé, Sécurité et Environnement

  Bermondsey, ON

  Temps plein

  II

  IPEX Inc.

  5+ ansCandidates need an occupational health and safety diploma (a degree is preferred), at least 5 years in health, safety and environment, 3 years in manufacturing and 3 years of claims management. Strong written and verbal communication, training skills and computer skills are also required.

  HSE databases

  25j

  Specialist, Health, Safety and Environment***Spécialiste, Santé, Sécurité et Environnement

  Bermondsey, ON

  Temps plein

  II

  IPEX Inc.

  5+ ansCandidates need an occupational health and safety diploma (a degree is preferred), at least 5 years in health, safety and environment, 3 years in manufacturing and 3 years of claims management. Strong written and verbal communication, training skills and computer skills are also required.

  HSE databases

• 25j

  Construction Labourer

  Kamloops, BC

  Temps plein

  GC

  Golderado Contracting Corp

  1+ ansCandidates need 1 to 2 years of industrial or civil construction experience, plus CSTS 2020, WHMIS 2015 and Ground Disturbance 201. They must be able to lift 9 to 23 kg, use compactors and trampers, have a reliable vehicle and speak proficient English.

  compactor, scaffolding, trampers

• 25j

  Millwright III - Day Shift

  Coaldale, AB

  41,16–47,32 $/hSur placeTemps plein

  G

  Global

  3+ ansCandidates need at least 3 years of millwright experience, a college or technical certificate (or equivalent experience), and a Millwright License. They also need WHMIS, lockout/tagout, forklift, first aid and Class 4 boiler operator credentials, plus experience with 480-volt 3-phase electricity and PLC programming.

  SAP, PLC, lift truck, hand tools, power tools

• 25j

  308A Sheet Metal Journeyman - G2/G1

  Burlington, ON

  47,80–65,06 $/h

  N

  Neelands

  Candidates need a 308A sheet metal license (Term 4 and 5 apprentices considered), a G2 gas license and an Ozone Depletion Prevention certificate. Strong blueprint reading, brazing experience and the ability to work independently and under pressure are also required.

  Sheet metal tools, Gauges, HVAC testing equipment

• 25j

  Mechanical Designer

  Mississauga, ON

  H

  Hatch

  7+ ansCandidates need heavy industrial plant layout and piping experience, knowledge of ASME piping codes, and extensive 2D and 3D CAD skills. A diploma in engineering design or drafting and 7+ years in mechanical or piping design are required.

  3D CAD software, BIM systems

• 25j

  Drilling Construction Supervisor

  St. John's, NL

  

  Nabors: Nabors Industries is a leading provider of advanced technology for the energy industry.

  7+ ans5+ gestionCandidates need a high school diploma, at least 7 years of drilling, construction or engineering experience and 5 years of supervisory experience. They must obtain offshore certifications such as BST, H2S, installation safety induction, regulatory awareness and WHMIS.

  Hand and power tools, Rig equipment, P&IDs, Piping ISOs, Project schedules

19 entreprises