Emplois “ISO 9001 management system” au Canada – Page 28

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Mechanic/Mechanical Assembler

  Collingwood, ON

  24–31 $/h

  ME

  MACLEAN ENGINEERING & MARKETING CO. LIMITED

  Candidates need some hands-on experience with heavy equipment or industrial machinery, basic knowledge of diesel, hydraulic and brake systems, and the ability to follow technical instructions and safety procedures. A high school diploma or certificate and a valid driver's licence are required.

  overhead crane, gantry crane, pneumatic tools, hydraulic tools, multimeter, pressure gauge

  1 mois

  Electrical Sub-Assembler

  Barrie, ON

  21,50–25 $/h

  ME

  MACLEAN ENGINEERING & MARKETING CO. LIMITED

  Candidates need a diploma or degree in a related discipline is preferred, along with electrical assembly experience, computer skills and experience with soldering, crimping and wiring. Strong attention to detail, teamwork and the ability to work independently are essential.

  Multimeter, Power supplies, Hand and small power tools

  1 mois

  Sub Assembler I - Electrical

  North Bay, ON

  21–27 $/h

  ME

  MACLEAN ENGINEERING & MARKETING CO. LIMITED

  Candidates need a minimum high school diploma or certificate of completion. Electrical, computer, and hand-tool assembly experience is an asset, and the ability to read basic engineering drawings and schematics is required.

  Multimeter, Hand and small power tools, Soldering equipment, Crimping tools

  1 mois

  Electrical Assembler

  North Bay, ON

  28–36 $/h

  ME

  MACLEAN ENGINEERING & MARKETING CO. LIMITED

  Candidates need a high school diploma or certificate of completion, and a related diploma or degree is preferred. Previous electrical experience or work as an L3 Electrical Sub Assembler at MacLean is an asset, along with the ability to lift up to 40 lbs and complete required training.

  Multimeter, Overhead crane, Gantry crane

  1 mois

  Machine Operator (Afternoon Shift)

  Barrie, ON

  21,50–23 $/h

  ME

  MACLEAN ENGINEERING & MARKETING CO. LIMITED

  Candidates need prior safe experience operating equipment in a manufacturing setting. Experience with a band saw, plasma burn table or laser table, and forklift or crane certification, are assets.

  band saw, burn table, manual brake press, overhead crane, gantry crane, forklift

  1 mois

  Heavy Duty Mechanic

  North Bay, ON

  24–35 $/h

  ME

  MACLEAN ENGINEERING & MARKETING CO. LIMITED

  2+ ansMacLean Engineering needs candidates with a 421A Heavy Duty Mechanic apprenticeship at level 2 or 3, or higher, and 2 to 4 years of heavy-duty equipment experience. Candidates must diagnose diesel, hydraulic, brake and transmission systems, and hold a valid driver's licence.

  OBD II scanner, multimeter, hydraulic tester, overhead crane, gantry crane, pneumatic tools

  1 mois

  Welder/Fitter

  Owen Sound, ON

  24–31 $/h

  ME

  MACLEAN ENGINEERING & MARKETING CO. LIMITED

  1+ ansCandidates need at least one year of fitting and welding experience, a high school diploma or certificate of completion, and the ability to read drawings. A welding C of Q or welding courses are preferred.

  GMAW equipment, SMAW equipment, Bandsaw, Bench grinder, Overhead crane, Gantry crane

  1 mois

  Machine Operator

  Owen Sound, ON

  21–25 $/h

  ME

  MACLEAN ENGINEERING & MARKETING CO. LIMITED

  1+ ansCandidates need a high school diploma or certificate of completion, and some post-secondary or skilled trade training is preferred. One or more years of related work experience is preferred, along with the ability to read drawings and work with minimal supervision.

  CNC equipment, band saw, burn table, brake press, overhead crane, gantry crane

  1 mois

  Electrical Sub-Assembler (Weekend Shift)

  Barrie, ON

  21,50–25 $/h

  ME

  MACLEAN ENGINEERING & MARKETING CO. LIMITED

  Candidates need a diploma or degree in a related field (preferred), and 1 to 2 years of electrical experience is an asset. Reading engineering schematics, using a multimeter and following ISO 9001 and safety procedures are expected.

  Multimeter, Power supplies, Hand and small power tools

• 1 mois

  Chief Operating Officer

  Burnaby, BC

  

  Novarc Technologies Inc: Novarc Technologies is a full-stack robotics company specializing in the design and manufacturing of cobots and AI systems for robotic welding…

  Candidates need executive operations leadership in a high-growth company, ideally scaling a complex hardware, robotics or industrial technology business. They should have overseen several operating functions and have strong supply chain, manufacturing, and people leadership experience.

  ERP, CRM

• 1 mois

  Forklift Operator/General Labourer

  Concord, ON

  

  Ram Iron & Metal Inc.: is a privately owned Canadian Company that has been actively involved in the recycling industry since 1983.

  Candidates need a valid counterbalance forklift certification and experience working outdoors. Knowledge of metals, skid-steer, rotator/clamp and cross-dock experience are assets.

  forklift, skid-steer, rotator/clamp, computer system

  1 mois

  Welder

  Toronto, ON

  

  Ram Iron & Metal Inc.: is a privately owned Canadian Company that has been actively involved in the recycling industry since 1983.

  5+ ansCandidates need at least 5 years of fabricating and welding experience, strong MIG and stick skills, and the ability to read blueprints and sketches. Knowledge of hydraulics, DC electrical systems and physically demanding outdoor work is needed, and a valid work permit is required unless the candidate is a Canadian citizen or permanent resident.

  MIG welder, TIG welder, Stick welder, Plasma cutter, Cutting torch, Hand tools

  1 mois

  Metal Inspector

  Toronto, ON

  

  Ram Iron & Metal Inc.: is a privately owned Canadian Company that has been actively involved in the recycling industry since 1983.

  Candidates need a valid counterbalance forklift certification and prior experience working outdoors. Knowledge of metal materials, front-end loader experience, and comfort with tablets or hand-held devices are assets.

  forklift, front-end loader, tablet, hand-held device

  1 mois

  General Labourer

  Toronto, ON

  

  Ram Iron & Metal Inc.: is a privately owned Canadian Company that has been actively involved in the recycling industry since 1983.

  Candidates need handyman skills, experience troubleshooting problems, and the ability to do physically demanding work outdoors. Forklift or skid-steer experience is highly preferred, and training is available if none exists.

  forklift, skid steer, bobcat, power washer

  1 mois

  Truck Mechanic Apprentice

  Toronto, ON

  

  Ram Iron & Metal Inc.: is a privately owned Canadian Company that has been actively involved in the recycling industry since 1983.

  Candidates need to be working toward a 310T Truck and Coach licence through an approved apprenticeship in Ontario and hold a valid G driver's licence. Experience with Kenworth, MACK, Peterbilt, roll-off and tractor trucks is an asset, along with strong attention to detail and a safety-first mindset.

  welding equipment

  1 mois

  Safety & Environmental Advisor

  Toronto, ON

  

  Ram Iron & Metal Inc.: is a privately owned Canadian Company that has been actively involved in the recycling industry since 1983.

  5+ ansCandidates need 5 to 7 years of health, safety and environmental experience, a college or university diploma (preferably in health and safety), first aid certification and JHSC Level II. Two to three years of ISO 9001, 14001 or 45001 experience and strong writing skills are also needed.

  Microsoft Word, Microsoft PowerPoint, Microsoft Excel, Microsoft Outlook

  1 mois

  Heavy Equipment Mechanic

  Toronto, ON

  

  Ram Iron & Metal Inc.: is a privately owned Canadian Company that has been actively involved in the recycling industry since 1983.

  2+ ansCandidates need at least two years of heavy equipment mechanic experience, knowledge of mechanics, welding and machine maintenance, and preventative maintenance experience. Certifications such as Maintenance Mechanic 421A, forklift driving and lock-out training are preferred or assets.

  forklift, excavator, skid steer, loader, baler, lathe

• 1 mois

  Quality Engineering Specialist

  Lunenburg, NS

  

  Stelia Aerospace North America Inc: specializes in the design, development and fabrication of advanced composites structures for the aeronautic, defense and space markets.

  5+ ansStelia Aerospace North America needs candidates with a degree in industrial, mechanical or aerospace engineering and 5-7 years of engineering experience, preferably in manufacturing. Knowledge of AS9100, ISO 9001, NADCAP and CAD/CAM software is required, and strong communication and teamwork skills are essential.

  CAD/CAM software

• 1 mois

  Supervisor, Environmental, Health & Safety and Quality

  Burlington, ON +1

  65k–81k $/anTemps plein

  

  DATA Communications Management Corp

  3+ ansCandidates need post-secondary education in health and safety, environmental science, quality or a related field, plus 3-5 years in manufacturing or multi-site production. Strong working knowledge of ISO 9001, familiarity with ISO 14001 and ISO 45001, and knowledge of Canadian health, safety and environmental regulations are required.

  Process improvement, Regulatory compliance, ISO 9001, Quality assurance procedures, ISO 14001, ISO 45001

• 1 mois

  Quality Manager

  Ingersoll, ON

  

  IMT CORPORATION

  10+ ansCandidates need at least 10 years of quality experience in manufacturing, including ISO 9001 and AS9100 systems. A Bachelor's degree or quality assurance certificate is required, along with ISO/AS9100 Lead Auditor certification and core tools such as PFMEA, PPAP, MSA and SPC.

  Microsoft Word, Microsoft Excel, Microsoft PowerPoint, Microsoft Outlook, Microsoft Visio, WebPublish

• 1 mois

  Production Supervisor

  Vaughan, ON

  75k–90k $/an

  

  Garland Commercial Ranges Ltd

  Candidates need a manufacturing or engineering background with hands-on metal fabrication experience on CNC, brake press and laser cutting equipment. They must read engineering drawings and blueprints, troubleshoot machinery, and ideally know Lean, Six Sigma, ISO 9001 and safety systems.

  CNC machines, brake presses, laser cutting machines, welding equipment, grinding equipment, drilling equipment

• 1 mois

  Engineering Project Coordinator

  Ingersoll, ON

  

  HYDRA DYNE TECHNOLOGY INC: Creating partnerships with both customers and suppliers has been the philosophy of the company since the very beginning and the success that Hydra…

  3+ ansCandidates need a degree or diploma in mechanical, manufacturing or engineering technology, plus 3+ years of engineering or project coordination experience. Machining experience, SolidWorks, ERP/BOM skills and strong organization are needed.

  SolidWorks, SAP, ERP/MRP system, CNC machining centres

• 1 mois

  Electrical Engineer, Senior

  Burnaby, BC

  

  Cellula Robotics Ltd: is a proudly Canadian, privately owned, world-leading marine technology company focused on revolutionizing underwater security through advanced…

  7+ ansCandidates need an electrical engineering bachelor's degree, a P.Eng with EGBC, and at least 7 years on complex embedded electrical systems. They also need at least 2 years of offshore or real-world subsea system experience and strong project leadership skills.

  Electrical engineering, Leadership, Robotics, Project management, P.Eng., Provide training

  1 mois

  Project Manager

  Burnaby, BC

  

  Cellula Robotics Ltd: is a proudly Canadian, privately owned, world-leading marine technology company focused on revolutionizing underwater security through advanced…

  7+ ans5+ gestionCandidates need 7 years of experience with multi-discipline engineering teams and 5 years as a project manager in robotics, subsea or a similar industry. Strong communication, leadership, advanced project reporting, schedule and budget skills, and Canadian work eligibility with security screening are required.

  Guarantee customer satisfaction, Present reports, Leadership, Decision making, Problem solving, Communication skills

9 entreprises