Emplois “rig equipment” au Canada – Page 34

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Wireline or Coil Tubing Operator

  Mount Pearl, NL

  Temps plein

  

  SLB

  2+ ansSLB needs candidates with a minimum high school diploma, at least 2 years of experience as a skilled operator or helper in open hole and cased hole wireline, and at least 2 years of coil tubing experience. Candidates must legally work and reside in Canada without visa sponsorship, and must obtain and keep government security clearances for explosives and radiation.

  wireline equipment, coil tubing unit

  1 mois

  Senior Well Engineer

  Mount Pearl, NL

  Temps plein

  

  SLB

  5+ ansCandidates need an engineering degree, 5+ years in drilling and well construction engineering and offshore drilling experience. They should understand well design and performance optimization, have analytical and problem-solving skills, and be able to work with operators and service providers.

  Leadership, Process improvement, Problem solving, Decision making

  1 mois

  WS Field Specialist - WIS

  Mount Pearl, NL

  Temps plein

  

  SLB

  5+ ansCandidates need at least 5 years of hands-on coil tubing field experience and valid well control certification. Offshore survival and medical certifications are needed or must be obtainable before mobilization, and Canadian residency is required.

  coil tubing unit, N2 pumping unit, fluid pumps, coil power pack, stripper, injector sub

  1 mois

  RP Equipment Operator

  Mount Pearl, NL

  Temps plein

  

  SLB

  2+ ansCandidates need a high school diploma, at least 2 years of experience as a skilled operator or helper in open hole and cased hole wireline, and at least 2 years in coil tubing. They must be legally authorized to work in Canada without visa sponsorship and be able to obtain and keep explosives and radiation security clearances.

  wireline equipment, coil tubing unit

• 1 mois

  Driller

  Fort McMurray, AB +1

  Temps plein

  

  Predator Drilling: Premier provider of pre-set and cementing services for surface casing and intermediate casing; oil sands, mining, conventional coring; and shallow…

  Candidates need proven rig leadership experience, strong knowledge of drilling operations, and good mechanical troubleshooting skills. They also need a valid driver's licence and current safety certifications such as H2S, First Aid/CPR, Confined Space, Fall Protection and ABSA Boiler Operator.

  drilling rig, drilling equipment

  1 mois

  Derrickhand

  Fort McMurray, AB +1

  Temps plein

  

  Predator Drilling: Premier provider of pre-set and cementing services for surface casing and intermediate casing; oil sands, mining, conventional coring; and shallow…

  Candidates need prior derrickhand experience on an oilfield drilling rig, mechanical aptitude, and comfort working at heights. A valid driver's licence is required, and H2S, First Aid/CPR and Confined Space certifications are an asset.

  mud pumps, drilling rig equipment

• 1 mois

  Lead Hand

  Winnipeg, MB

  Temps plein

  RM

  Russel Metals (CDN)

  Candidates need experience in metals fabrication, steel service, warehouse or industrial manufacturing, with lead hand or supervisory experience preferred. Strong leadership, communication and problem-solving skills, plus forklift and overhead crane certification, are preferred.

  forklift, overhead crane, rigging equipment

• 1 mois

  Fitter/ Welder

  Grimsby, ON

  27–30 $/h

  

  ATCO Group

  Candidates need experience in structural welding, fitting and steel fabrication, and must be able to read blueprints, shop drawings and welding symbols. A current FCAW certification is preferred, and the work requires safe handling of tools and materials and lifting up to 55 lbs unassisted.

  Torches, Drills, Grinders, Clamps, Squares, Overhead cranes

• 1 mois

  Heavy Duty Mechanic

  Passmore, BC

  42,50–45 $/hTemps plein

  

  Baldface

  10+ ansBaldface needs experienced heavy duty mechanics with at least 10 years of heavy duty work and 5 years on snowcats. Candidates need a Red Seal or equivalent, a Class 5 BC licence, and practical skills with diesel, hydrostatic drives, generators and snowmobiles.

  Snowcat, Pistenbully, Generators, Snowmobile, Fleet management software

• 1 mois

  Software Reliability Team Lead / Chef(fe) d'équipe, Fiabilité logicielle

  Montréal, QC

  Temps plein

  

  Vention

  8+ ans2+ gestion8+ ans en génie logiciel ou en assurance qualité logicielle; 2+ ans à gérer ou diriger techniquement une équipe; Expérience réelle en systèmes embarqués ou industriels

  Qase.io, Slack, HIL rigs, test jigs

• 1 mois

  Ingénieur Systèmes pneumatiques et air H/F - Canada

  Laval, QC

  TélétravailTemps plein

  

  ECM - Engineering Conception Maintenance

  5+ ansBac+5 en génie mécanique ou aérospatial; 5 à 15 ans d'expérience en ingénierie aéronautique; Maîtrise de la dynamique des fluides et de la thermodynamique

  MBSE, outils de simulation, outils bureautiques

• 1 mois

  Wheatland Millwright

  Carseland, AB

  41,40–49,95 $/hTemps plein

  

  USG Corporation

  3+ ansCandidates need 3+ years as a journeyman millwright or maintenance mechanic and proficient welding experience. Manufacturing experience, the ability to read blueprints and hydraulic and electrical schematics, and good teamwork and communication are also needed.

  Welders, Cranes, Rigging equipment, Hand and power tools, Fall restraint equipment, Pneumatic tools

• 1 mois

  Superintendent

  Nisku, AB

  

  PCL Construction

  15+ ans15+ gestionCandidates need a journeyperson steamfitter-pipefitter or welder certificate (Red Seal preferred) or a related diploma or engineering degree, plus NCSO (IND) and Gold Seal certification. Preferred experience is 15 years of supervisory work, including time running a spool fabrication shop, with strong knowledge of piping codes, welding processes and NDE.

  Overhead crane, Positioners and rotators, Automated and mechanized welding equipment, Cutting and bevelling equipment

• 1 mois

  Pipefitter

  Squamish, BC

  57 $/hTemps plein

  

  Pacific Energy Canada: The Woodfibre LNG Project is operated by Woodfibre Management Ltd, a privately held Canadian company based in Vancouver, British Columbia.

  5+ ansCandidates need a BC Journeyman Pipefitter or Red Seal Journeyman certification and 5-7 years of oil and gas experience such as LNG or refining. Strong rigging, troubleshooting and mechanical skills are needed, along with the ability to work weekends, extended hours and physically demanding conditions.

  Cranes, Rigging equipment, Pressure test equipment

  1 mois

  Millwright

  Squamish, BC

  60 $/hTemps plein

  

  Pacific Energy Canada: The Woodfibre LNG Project is operated by Woodfibre Management Ltd, a privately held Canadian company based in Vancouver, British Columbia.

  5+ ansCandidates need a BC Journeyman Millwright or Red Seal Journeyman certification, 5 to 7 years of oil and gas experience, and strong mechanical and rigging skills. Experience with turbomachinery, vibration certification and a dual Pipefitter or Welder ticket are assets.

  Rigging equipment, Cranes

• 1 mois

  Journeyman Powerline Technician

  Ontario

  53,96–55,52 $/h

  A

  Aecon: (TSX: ARE) is a North American construction and infrastructure development company with global experience.

  2+ ansCandidates need a Journeyman Power Lineman trade certificate, at least 2 years of utility line experience and a DZ driver's licence. They must be able to climb poles and towers, work at heights in extreme weather, and work well on a team.

  Radial boom digger, Line truck, Hot stick, Hand tools, Hot line tools

  1 mois

  Millwright, Journeyperson & Apprentice

  Calgary, AB +1

  A

  Aecon: (TSX: ARE) is a North American construction and infrastructure development company with global experience.

  Candidates need a provincial journeyperson ticket or an apprenticeship indenture, the CSTS-20 certificate, and millwright experience in industrial construction. They must work independently and in teams, lift up to 25 kg, work in all weather, and speak and write English fluently.

  rig equipment, dollies, vibration analysis equipment, CCTV monitoring systems, computerized control systems

  1 mois

  Crane Operator

  Saskatoon, SK +4

  40,80–51 $/h

  A

  Aecon: (TSX: ARE) is a North American construction and infrastructure development company with global experience.

  Candidates need a CSTS-20 certificate and crane operating experience in industrial construction. They must work safely, independently and in teams, understand industrial safety, lift up to 25 kg, and be fluent in English.

  Mobile crane, Boom, Load lines, Pendant cables, Hoist cable, Blocking and leveling materials

  1 mois

  Journeyperson, Substations

  Cambridge, ON

  80–85 $/h

  A

  Aecon: (TSX: ARE) is a North American construction and infrastructure development company with global experience.

  2+ ansCandidates need a Journeyman Power Lineperson or Electrician trade certificate and at least 2 years of utility experience. They must know provincial electrical and safety regulations, be able to climb poles and towers, and have a valid driver's licence.

  Radial Arm Digger, Line truck, Crane, Hot line tools, Blocks and grips, Jacks

  1 mois

  Structural Superintendent - Future Opportunities

  Saskatoon, SK +2

  A

  Aecon: (TSX: ARE) is a North American construction and infrastructure development company with global experience.

  5+ ansCandidates need 5+ years of on-site construction experience with structural steel, supervisory or superintendent experience on industrial projects, and strong knowledge of steel erection, rigging and reading structural drawings. Trade certification such as Ironworker is an asset.

  crane, rigging equipment

  1 mois

  Millwright Superintendent - Future Opportunities

  Saskatoon, SK +2

  A

  Aecon: (TSX: ARE) is a North American construction and infrastructure development company with global experience.

  5+ ansCandidates need at least 5 years of industrial construction experience, ideally in a supervisory role over millwright or mechanical work. They must know machinery alignment, rigging, rotating equipment and hydraulic systems, and be able to read mechanical drawings. A Journeyperson Industrial Mechanic (Millwright) certification is preferred.

  mechanical drawings, alignment tools, rigging equipment

  1 mois

  Millwright, Journeyperson

  Fort Saskatchewan, AB

  A

  Aecon: (TSX: ARE) is a North American construction and infrastructure development company with global experience.

  Candidates need a Provincial Journeyperson ticket or a provincial apprenticeship, CSTS-20, and in-class fall protection, mobile elevated work platform and confined space certificates, plus industrial millwright experience. They must lift up to 25 kg, work in all weather, and be fluent in English.

  Dollies, Vibration analysis equipment

  1 mois

  Lifting & Rigging Superintendent - Future Opportunities

  Barrie, ON

  120k–180k $/an

  A

  Aecon: (TSX: ARE) is a North American construction and infrastructure development company with global experience.

  10+ ans5+ gestionAecon needs candidates with 10+ years in heavy civil construction and 5+ years supervising large lifts. They must hold a rigging and hoisting certification and know load charts, crane capacities and lift studies.

  Microsoft Office, Project management software, Crane, Rigging gear, Load charts

  1 mois

  Superintendent

  Edmonton, AB +1

  A

  Aecon: (TSX: ARE) is a North American construction and infrastructure development company with global experience.

  5+ ans5+ gestionCandidates need at least 5 years of construction supervisory experience, including supervising piling or deep foundation work on heavy civil projects. They also need to read drawings, specifications and geotechnical reports, coordinate cranes, drill rigs and concrete work, and lead crews safely.

  MS Office, cranes, drill rigs, pile driving equipment, vibratory hammers, excavators

11 entreprises