Emplois “respirator” au Canada – Page 35

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Industrial Cleaning Technician

  Edmonton, AB

  Temps plein

  

  DeBusk Services Canada, Ltd: Founded in 2012, USA DeBusk has its headquarters in Deer Park, Texas, and operates 55 offices and service centers across North America, as well as a…

  Candidates need a high school diploma or equivalent, a valid driver's licence or state ID, and a TWIC card or application receipt. They must pass drug screening, follow verbal and written instructions, and be fit for heavy outdoor work at heights and in confined spaces. Hydro-blasting or pressure cleaning experience is preferred but not required.

  high-pressure pump, hydro-blasting equipment, vacuum truck, hoses, valves

• 1 mois

  Resident Care Aide

  Burnaby, BC

  

  George Derby Care Society: In 1962, the Centre became part of Vancouver’s Shaughnessy Hospital as the George Derby Wing, further solidifying its role in veteran care.

  Candidates need Grade 10 plus graduation from a recognized Resident Care Attendant program, or an equivalent mix of education and experience. They must communicate well verbally and in writing, work well with others, organize their work, and meet a clear criminal record check and TB test requirement.

  Wheelchairs, Mechanical lifts, Oxygen equipment, Bedpans

• 1 mois

  Red Seal Auto Body and Collision Technician

  Halifax, NS

  Temps plein

  

  Steele Auto Group: Steele Auto Group is heavily involved with, and supports the communities it operates in, while maintaining strategic partnership initiatives that…

  Candidates need a Red Seal Autobody Technician certification, strong diagnostic skills, and a valid driver's licence with an acceptable driver abstract. They must be clean-shaven to seal CSA-approved respirators, unless they request accommodation.

  Red Seal, Mental health

  1 mois

  Apprentice Technicians

  Corner Brook, NL

  Temps plein

  

  Steele Auto Group: Steele Auto Group is heavily involved with, and supports the communities it operates in, while maintaining strategic partnership initiatives that…

  Steele Auto Group needs candidates who are Red Seal certified, hold a valid Motor Vehicle Inspection License and a valid driver's licence with an acceptable driver's abstract, and who are organized, hardworking and self-motivated.

  CSA-approved respirator

  1 mois

  Body Technician/ Painter

  Saint John, NB

  Temps plein

  

  Steele Auto Group: Steele Auto Group is heavily involved with, and supports the communities it operates in, while maintaining strategic partnership initiatives that…

  Candidates need experience as a body technician, strong diagnostic skills and pride in workmanship, plus a valid driver's licence and an acceptable driver abstract. They must be clean-shaven so a CSA-approved respirator can seal properly, unless they request accommodation.

  CAD

• 1 mois

  Journeyman Welder - Structural (Night Shift)

  Alberta

  Temps plein

  

  Powell

  2+ ansCandidates need a Red Seal Journeyperson Welder or Fitter certification, at least 2 years as a journeyperson in structural steel fabrication, and a CWB FCAW S-classification certification. Powell requires CSTS 2020 Fundamentals and eight modules before hire, plus the ability to read shop drawings and welding symbols.

  welding machines, plasma cutter, band saw, Mag drill, grinders, overhead crane

  1 mois

  Facilities Maintenance Technician

  Alberta

  Temps plein

  

  Powell

  2+ ansPowell needs candidates with a high school diploma and 2-4 years of experience in a maintenance group. Basic MS Office skills and a basic command of English are required, and safety certificates for elevated work platforms, fall arrest, forklifts and cranes are an asset.

  MS Office, forklift, crane, elevated work platform

  1 mois

  Senior Electrical Engineer

  Alberta

  Temps plein

  

  Powell

  5+ ansCandidates need a BSc in Electrical Engineering and at least five years of switchgear engineering experience. Knowledge of CEC, CSA, IEEE and ANSI codes, AutoCAD skills and strong written and oral communication are required, and a P.Eng. registration is an asset.

  AutoCAD

  1 mois

  Production Worker - Copper Dip/Powder Coat (Days)

  Alberta

  Temps plein

  

  Powell

  1+ ansCandidates need a high school diploma and a basic command of English, both written and spoken. Metal fabrication shop experience of one to two years and safety certifications are assets. The work requires physical stamina, ability to work at heights and comfort with hot, industrial conditions.

  forklift, pallet jack, crane, grinder, sander, hand tools

  1 mois

  Fab Machine Operator - Day Shift

  Edmonton, AB

  Temps plein

  

  Powell

  1+ ansCandidates need a high school diploma and the ability to read shop drawings and learn CNC programming. Experience in metal fabrication, a sheet metal trade certification and familiarity with turret, press brake, plasma or laser equipment are assets.

  Turret punch, Press brake, Microsoft Office, MES

  1 mois

  Quality Inspector

  Edmonton, AB

  Temps plein

  

  Powell

  Candidates need an electrical engineering diploma or degree (a journeyman trade ticket is an asset), 0-3 years in manufacturing, and skill with test equipment and electrical prints. Strong written and spoken English, basic computer skills and safety training are also required.

  clamp-on meter, voltage detector, Hi-Pot, PLC, HMI, relays

  1 mois

  Senior Quality Inspector

  Edmonton, AB

  Temps plein

  

  Powell

  3+ ansCandidates need 3 to 5 years of quality inspection experience on electrical equipment, a high school diploma or trade certificate, and the ability to read electrical prints and apply industry codes and standards. Strong English, written and verbal, is required.

  Clamp-on meter, Voltage detector, PLC, HMI, Microprocessor-based relays

  1 mois

  Lead Wiring Technician - Day Shift

  Edmonton, AB

  Temps plein

  

  Powell

  Candidates need a high school diploma or GED and strong troubleshooting skills on electrical and control systems. Experience with SEL relays, fibre optic and Ethernet networks, and reading schematics is expected, and prior team leadership is preferred.

  SEL relays, ammeters, fibre optic network, Ethernet switches, coaxial communication systems, Oracle

  1 mois

  Apprentice Welder - Night Shift

  Edmonton, AB

  Temps plein

  

  Powell

  Powell Canada needs a registered welding apprentice with at least a third-year welding program and high school diploma. Candidates must read drawings and welding symbols, work to ISO quality practices, and speak and write basic English.

  welding equipment, plasma cutter, grinder, metalworking machines, tape measure, clamps

  1 mois

  Production Worker - Copper Dip (Days)

  Alberta

  Temps plein

  

  Powell

  1+ ansCandidates need a high school diploma and a basic command of English, both written and verbal. Metal fabrication shop experience and safety certifications are assets, and candidates must be legally authorized to work in Canada.

  forklift, crane, pallet jack, grinder, sander, hand tools

  1 mois

  Expeditor - Night Shift

  Edmonton, AB

  Temps plein

  

  Powell

  2+ ansPowell needs a high school diploma or GED and 2-4 years in a manufacturing or assembly environment. Candidates should be proficient with material nesting software, Oracle queries and Excel, and read MRP and stock status reports.

  Oracle, Excel, MRP, Material nesting software

  1 mois

  Production Worker - Copper Dip (Days)

  Alberta

  Temps plein

  

  Powell

  1+ ansCandidates need a high school diploma and a basic command of English, both written and verbal. Metal fabrication shop experience and safety certifications are assets, and candidates must be legally authorized to work in Canada.

  forklift, crane, pallet jack, grinder, sander, hand tools

  1 mois

  Wiring Technician - Day Shift

  Edmonton, AB

  Temps plein

  

  Powell

  Candidates need a high school diploma, 0-1 years of manufacturing experience, the ability to read prints and wiring diagrams, basic math and English, and legal authorization to work in Canada.

  Hand tools, Electric tools, Air tools, Vibrating tools, Tin snips, Power tools

  1 mois

  Journeyman Welder - Structural (Nights)

  Alberta

  Temps plein

  

  Powell

  2+ ansCandidates need a Red Seal Journeyperson Welder or Fitter certification, at least 2 years of journeyperson structural fabrication experience, and a CWB FCAW all-position certificate. They must read shop drawings and welding symbols, complete CSTS 2020 training before hire, and have basic English.

  plasma cutter, automatic band saw, Mag drill, grinders, hand tools, overhead crane

  1 mois

  Wiring Technician - Day Shift

  Alberta

  Temps plein

  

  Powell

  Candidates need a high school diploma, 0-1 years of manufacturing experience, the ability to read prints and wiring diagrams, basic math and English, and legal authorization to work in Canada.

  Hand tools, Electric tools, Air tools, Vibrating tools, Tin snips, Power tools

  1 mois

  Mechanical Assembler - Night Shift

  Edmonton, AB

  Temps plein

  

  Powell

  Candidates need a high school diploma, some manufacturing experience, and the ability to read a tape measure and convert between fractions, decimals and metric. Strong teamwork, willingness to learn, and a safety-first attitude are essential, along with legal authorization to work in Canada.

  hand tools, power tools, tin snips, hammer, tape measure, ladders

  1 mois

  Production Worker - Steel Fabrication (Days)

  Edmonton, AB

  Temps plein

  

  Powell

  1+ ansCandidates need a high school diploma, basic English, and the ability to read a tape measure with unit conversions. One to two years of metal fabrication shop experience and safety certifications are assets.

  forklift, pallet jack, crane, air grinder, electric grinder, sander

  1 mois

  Production Worker - Powder Coat (Days)

  Alberta

  Temps plein

  

  Powell

  1+ ansCandidates need a high school diploma, a basic command of spoken and written English, and the ability to read a tape measure with fraction, decimal and metric conversions. Metal fabrication shop experience of 1-2 years and safety certifications are assets.

  Forklift, Pallet jack, Crane, Grinder, Sander, Hand tools

• 1 mois

  Health Care Aide - Casual

  Vancouver, BC

  31,64 $/hTemps partiel

  

  Providence Living

  Candidates need Grade 10 plus graduation from a recognized Nursing Assistant Program or equivalent experience, and registration with the BC Care Aide and Health Worker Registry. Strong verbal and written communication, teamwork and organizational skills are needed.

  wheelchair, stretcher

5 entreprises