Emplois “Mechanical drawings and manuals” au Canada – Page 41

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Reactor Components Design Engineering Assistant

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  6+ ansCandidates need a Bachelor's or graduate degree in Mechanical Engineering or equivalent, up to 6 years of mechanical design experience, and classical stress calculation skills. GD&T training and strong written and oral communication are assets.

  Procurement, Mechanical engineering, Work independently, Problem solving, Time management, Communication skills

  1 mois

  Mechanical Design Engineer- Nuclear

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  3+ ansCandidates need a mechanical engineering degree, a Professional Engineer licence or eligibility in Ontario, and 3 to 6 years of mechanical design experience. Strong stress calculation skills, code and standards knowledge, and good written and oral communication are required.

  Procurement, Mechanical engineering, P.Eng., Work independently, Problem solving, Communication skills

  1 mois

  Mechanical Design Engineer- Nuclear

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  5+ ansCandidates need a bachelor's or master's in mechanical engineering, a Professional Engineer licence or eligibility in Ontario, and at least 5 years of mechanical engineering experience. GD&T, classical stress calculation and Excel or Mathcad skills are required, and knowledge of ASME and CSA nuclear codes is an asset.

  Microsoft Excel, Mathcad

  1 mois

  Intermediate Piping Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  2+ ansCandidates need a mechanical engineering degree, EIT registration or eligibility in Ontario, and 2 to 5 years of mechanical design experience in heavy industry. Knowledge of piping stress analysis, nuclear codes, and software such as CAESAR II or ANSYS is expected.

  PipeStress, AutoPipe, ANSYS, MATLAB, MathCAD

  1 mois

  Junior/Intermediate Piping Layout Engineer/Designer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  2+ ansCandidates need a mechanical engineering degree and EIT registration or eligibility in Ontario, plus 2 to 5 years in heavy industry. Piping layout and stress analysis knowledge, along with strong communication and technical writing, are required.

  S3D

  1 mois

  Specialist Engineer – Piping and Support

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  15+ ansCandidates need a mechanical engineering degree, a Professional Engineer licence in Ontario, and at least 15 years of piping stress analysis experience. Strong knowledge of PIPESTRESS, ASME and CSA nuclear codes, and CANDU systems is required.

  PIPESTRESS, AUTOPIPE, GTStrudl, MCPLAK

  1 mois

  Specialist Engineer – Feeder/Piping Design and Layout

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  15+ ansCandidates need a mechanical engineering degree, Professional Engineer registration in Ontario, and at least 15 years of feeder and piping design experience in heavy industry, ideally on CANDU projects. Strong knowledge of CSA N285, CSA B51, CSA N289, ASME codes and piping specifications is required.

  4D CADDS

  1 mois

  Specialist Engineer – Feeder Analysis

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  15+ ansCandidates need a mechanical engineering degree, Professional Engineer registration in Ontario, and at least 15 years of feeder, pipe and support stress analysis experience. They must know ANSYS Mechanical APDL, CSA N285 and ASME Section III, and communicate well in technical writing and with clients.

  ANSYS Mechanical APDL, ANSYS Workbench, LS-DYNA

  1 mois

  Senior Piping Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  10+ ansCandu Energy needs a mechanical engineer with a P.Eng licence and at least 10 years of heavy-industry experience, ideally in nuclear piping, stress analysis and CANDU systems. Strong communication and technical writing skills are required.

  PipeStress, CAESAR II, AutoPipe, ANSYS Mechanical, MATLAB, MathCAD

  1 mois

  Project Engineering Manager - Piping

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  10+ ansCandidates need a mechanical engineering degree with at least 10 years of technical experience and Professional Engineer status in Ontario, or eligibility for it. Piping stress analysis, CSA N285/ASME III knowledge and leadership of technical groups are required.

  Caesar II, PipeStress, ANSYS

  1 mois

  Senior Feeder Piping Analyst/Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  8+ ansCandidates need a P.Eng. (or eligibility) in Ontario, a mechanical engineering degree, and 8 to 10 years of heavy-industry experience, ideally nuclear. They must have ANSYS and piping stress analysis skills, know ASME Section III and CSA N285.0 standards, and communicate well in writing.

  ANSYS Mechanical, LS-DYNA, PipeStress, AutoPipe, MATLAB, MathCAD

  1 mois

  Project Engineering Manager - Feeder

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  10+ ansCandidates need a mechanical engineering degree with at least 10 years of technical experience and a Professional Engineer licence in Ontario (or eligibility for registration). Experience in piping stress calculation, CSA N285/ASME Section III design and CANDU feeder systems is required.

  ANSYS, LS-DYNA

• 1 mois

  Maintenance Technician - Afternoon (433A Licensed)

  Mississauga, ON +2

  Temps plein

  GE

  GFL Environmental Services Inc.

  Candidates need a valid 433A Millwright licence or Red Seal, a G driver's licence, and experience in an industrial setting is an asset. They must be comfortable working outdoors in all weather and on rotating shifts, with strong written and oral communication and attention to detail.

  Cranes, Jacks, Hoists, Welding equipment, Computer

• 1 mois

  Inspecteur en assemblage de structures / Aircraft Structural Assembly Inspector

  Montréal, QC

  Temps plein

  AC

  Airbus Canada Limited Partnership

  2+ ansCandidates need a DEC or AEC in mechanical engineering, aircraft maintenance or aeronautical construction, plus relevant assembly experience or three years as an aerospace inspector. They must be fluent in French, communicate well and be comfortable working in confined spaces and at heights up to 30 feet.

  measuring tools

  1 mois

  Assembleur structure / Structural assembler

  Montréal, QC

  Temps plein

  AC

  Airbus Canada Limited Partnership

  3+ ansCandidates need a vocational diploma (DEP or DEC) in aerospace structure or mechanical assembly, or a high school diploma plus 3 years of recent assembly experience. They must be able to work in confined spaces, at heights up to 30 feet, and in varied physical positions.

  jigs

  1 mois

  Spécialiste en analyse des contraintes - Structures métalliques et composites / Stress Analysis Specialist - Metallic and Composites Structures

  Montréal, QC

  Temps plein

  AC

  Airbus Canada Limited Partnership

  8+ ansBaccalauréat en génie mécanique ou aérospatial; Au moins huit ans d'expérience en analyse de contraintes aérospatiale; Connaissance des structures métalliques et composites d'avions

  CATIA V5

  1 mois

  Concepteur Outillage /Tool Designer

  Montréal, QC

  Temps plein

  AC

  Airbus Canada Limited Partnership

  5+ ansBaccalauréat en génie mécanique ou DEC en génie mécanique avec forte expérience; Minimum de 5 ans d'expérience dans le secteur industriel, idéalement en conception d'outillage; Maîtrise du GD&T et des règles de conceptio

  SolidWorks, CATIA, Inventor, PDM/PLM system

• 1 mois

  Airworthiness Coordinator

  Fort Erie, ON

  Temps plein

  AH

  Airbus Helicopters Canada Ltd

  7+ ansAirbus Helicopters Canada Ltd needs candidates with a engineering degree, at least 7 years of aerospace technical or program experience and 5 years in type or supplemental type certificate development. Strong autonomy, problem-solving and recent direct work with Transport Canada are also required.

  CATIA V5, SAP, Smartsheet, Microsoft Office, Google Workspace

• 1 mois

  Technician

  Kelowna, BC

  Temps plein

  UT

  UBC The University of British Columbia

  2+ ansCandidates need a postsecondary degree in civil or mechanical engineering and over 2 years of relevant experience. They must work independently, follow safety rules and train others.

  hydraulic testing machines, spectrophotometer, autoclave, centrifuge, analytical balance, muffle furnace

• 1 mois

  CNC Machine Operator - Brampton, ON (On-site)

  Brampton, ON

  23 $/hTemps plein

  VC

  Victaulic Company of Canada ULC

  2+ ansVictaulic Company of Canada ULC needs candidates with at least 2 to 5 years of CNC lathe and milling experience and strong blueprint reading skills. Candidates must also be able to use measuring instruments and tools and follow engineering instructions. Crane training is an asset.

  CNC lathe, CNC milling machine, Precision measuring instruments, Hand tools, Power tools

• 1 mois

  12-Prodtn Mechanic

  Bertrand, NB

  Temps plein

  MC

  Mondelez Canada Inc.

  4+ ansCandidates need at least 4 years of experience as a licensed Millwright in the CPG or food industry, plus a high school diploma. They should understand automation, electronics and mechanical systems, read technical drawings and manuals, and work well both independently and in a team.

  Testing equipment, Technical manuals, Schematic drawings

• 1 mois

  Maintenance Mechanic/Millwright

  Oshawa, ON

  Sur placeTemps plein

  EC

  EHC Canada Inc.

  5+ ansCandidates need a valid Ontario Industrial Mechanic (Millwright) 433A Certificate of Qualification, or the ability to obtain it within an agreed time frame, plus at least 5 years of industrial maintenance experience in manufacturing. EHC Canada also expects strong knowledge of mechanical, hydraulic, pneumatic and power transmission systems, blueprint reading and CMMS use.

  CMMS, Laser alignment equipment, Dial indicators, Vibration analysis equipment, Welding equipment, Hand and power tools

• 1 mois

  Process Engineer

  Concord, ON

  Temps plein

  MM

  Multimatic Manufacturing

  3+ ansCandidates need a Canadian university degree or college diploma in industrial, manufacturing or mechanical engineering or technology, and three to five years of related experience. Plastics processing knowledge, CAD skills, and fluent English are required.

  SOLIDWORKS, KeyCreator, MS Office, Outlook

• 1 mois

  Sr. Supplier Development Engineer

  Concord, ON

  Temps plein

  MM

  Multimatic Mechanisms Group

  6+ ansMultimatic Mechanisms Group needs candidates with a bachelor's degree in engineering and 6 to 10 years in automotive manufacturing, supplier development, quality or supply chain. Candidates need strong knowledge of APQP, PPAP, PFMEA, IATF 16949 and ISO 14001.

  Microsoft Excel, Microsoft PowerPoint, Microsoft Word, SAP, SharePoint

10 entreprises