Emplois “3D AutoCAD” au Canada – Page 44

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Conveyance Project Lead & Senior Engineer

  Mississauga, ON

  H

  Hatch

  8+ ansCandidates need a civil or environmental engineering degree, a Professional Engineer (P.Eng.) licence in Ontario, and 8 to 12 years of linear water and wastewater conveyance experience, including at least 5 years on such systems.

  AutoCAD, Civil 3D, MicroStation, GIS, MS Project, BIM

  1 mois

  Utility CAD Designer, Senior

  Mississauga, ON

  H

  Hatch

  7+ ansCandidates need 7+ years of utility or municipal CAD design experience, a Civil Engineering Technology diploma or equivalent, and the ability to work independently. AutoCAD, Civil 3D, ProjectWise and Autodesk Construction Cloud are required.

  AutoCAD, Civil 3D, ProjectWise, Autodesk Construction Cloud, MicroStation, OpenRoads

  1 mois

  Civil Engineering Trainee

  Thunder Bay, ON

  H

  Hatch

  Candidates need a graduated or soon-to-graduate Civil Engineering degree from an accredited university, plus strong communication, teamwork and problem-solving skills. Familiarity with CAD and design software is an asset, and a valid driver's licence is required.

  AutoCAD, Civil 3D, MicroStation, InRoads, EPA SWMM, MathCAD

  1 mois

  CAD Designer/Open Roads Specialist

  Thunder Bay, ON

  H

  Hatch

  5+ ansCandidates need a civil engineering technology or drafting diploma or degree and 5+ years of civil or transportation design drafting. Advanced OpenRoads Designer and MicroStation skills are required.

  Bentley OpenRoads Designer, MicroStation, AutoCAD Civil 3D, Bentley ProjectWise, GIS

  1 mois

  Drainage Engineer, Senior

  Mississauga, ON

  H

  Hatch

  10+ ansCandidates need a civil or water resources engineering degree, a P.Eng. designation in Ontario, and at least 10 years of water resources and transportation project experience. Hydrologic modelling, GIS and design software skills, and experience with conservation authorities are also required.

  SWMHYMO, PCSWMM, InfoWorks, CulvertMaster, ArcGIS, AutoCAD

  1 mois

  Senior Electrical Designer

  Saskatoon, SK

  H

  Hatch

  7+ ansHatch needs candidates with an electrical engineering diploma, 7+ years of electrical design experience on large industrial projects, and strong skills in 3D design tools such as MicroStation or AutoCAD. Site experience in walk-downs and commissioning, and knowledge of IEEE, CSA, NEC and CEC codes, are also required.

  MicroStation, AutoCAD, OpenPlant, MicroStation PSDS, Bentley BRCM

  1 mois

  Technicien(ne) dessinateur(trice) électrique

  Montréal, QC

  H

  Hatch

  DEC en technologie de l'électronique industrielle, électrodynamique ou formation pertinente; Expérience en conception électrique en génie-conseil, industriel, énergétique ou infrastructures; Maîtrise de MicroStation et/o

  MicroStation, AutoCAD

  1 mois

  Bridge Engineer, Intermediate

  Mississauga, ON

  H

  Hatch

  5+ ansCandidates need a civil or structural engineering degree, 5 to 10 years of bridge design experience to the Canadian Highway Bridge Code or AASHTO, and a P.Eng. or eligibility for licence in Ontario. Strong skills in bridge analysis software, MicroStation or AutoCAD, and excellent written and oral communication are required.

  MicroStation, AutoCAD, MS Office

  1 mois

  Control and Automation, Electrical Designer

  Greater Sudbury, ON

  H

  Hatch

  Candidates need a recent Electrical Engineering Technician or Technologist diploma, or to be working toward graduation in 2027. They should be proficient in AutoCAD or MicroStation 2D and 3D, know the Canadian Electrical Code and ISA standards, and be willing to travel to project sites.

  AutoCAD, MicroStation, Microsoft Word, Microsoft Excel, Microsoft Outlook

  1 mois

  Electrical and Instrumentation Designer

  Mississauga, ON

  H

  Hatch

  Candidates need to be a recent graduate or working toward graduating in 2027 with an electrical technician or technologist diploma. They need AutoCAD or MicroStation skills and knowledge of the Canadian Electrical Code and ISA standards.

  AutoCAD, MicroStation, Microsoft Office

  1 mois

  Junior Electrical Designer

  Saskatoon, SK

  H

  Hatch

  Candidates need to be working toward graduating in 2027 or be a recent Electrical Engineering Technician or Technologist graduate. Hatch asks for AutoCAD or MicroStation skills, knowledge of industrial electrical design and the Canadian Electrical Code, and strong communication skills.

  AutoCAD, MicroStation, Microsoft Office

  1 mois

  Electrical Designer

  Vancouver, BC

  H

  Hatch

  Candidates need a diploma in electrical engineering technology or graduation in 2027, AutoCAD or MicroStation skills, and knowledge of the Canadian Electrical Code and ISA standards. Strong communication, attention to detail and a health and safety mindset are required.

  AutoCAD, MicroStation, Microsoft Word, Microsoft Excel, Microsoft Outlook, ETAP

  1 mois

  Mechanical/Piping Designer Technologist

  Saskatoon, SK

  H

  Hatch

  Hatch needs candidates working toward graduation in 2027 or recently graduated with a Diploma in Mechanical Engineering Technology or similar. Co-op or internship experience, CAD skills in AutoCAD, Revit or OpenPlant, and strong communication and teamwork are assets.

  AutoCAD, Revit, Bentley MicroStation, OpenPlant, Design Review

  1 mois

  Saskatoon Office - Intermediate - Mechanical/Piping Designer

  Saskatoon, SK

  H

  Hatch

  Hatch needs a technology diploma (mechanical preferred), 3D modelling ability, and proficiency in AutoCAD and MicroStation. Candidates also need isometric production control experience, good communication skills, and the ability to work independently and in a team.

  AutoCAD, MicroStation

  1 mois

  Controls & Automation Engineer - Sudbury

  Greater Sudbury, ON

  H

  Hatch

  7+ ansCandidates need a Bachelor's degree in electrical engineering, 7+ years of project engineering experience including 1-2 years of commissioning, and a PEO-registered professional engineer licence. PLC/DCS programming, especially Rockwell, and experience with data-centric design tools are also required.

  Rockwell PLC, DeltaV, ABB, Smart Plant Electrical, Smart Plant Instrumentation, AutoCAD

  1 mois

  Mechanical Engineer - Hydropower

  Niagara Falls, ON

  H

  Hatch

  15+ ansCandidates need a mechanical engineering bachelor's degree, Professional Engineer registration in Ontario or another Canadian province, and at least 15 years of experience, preferably with rotating equipment. Strong leadership, communication and multi-project management skills are required.

  AutoCAD, Inventor, SolidWorks, Mathcad

• 1 mois

  Ingénieur(e), Méthodes (opportunité future)

  Montréal, QC

  A

  Aecon: (TSX: ARE) is a North American construction and infrastructure development company with global experience.

  5+ ansBaccalauréat en génie civil ou génie de la construction; 5 à 8 ans d'expérience en conception structurale; Membre en règle de l'Ordre des ingénieurs du Québec

  Advance Design, AutoCAD, MS Project, Revit, Civil 3D, SketchUp

  1 mois

  CAD Drafter

  Hamilton, ON

  65k–75k $/an

  A

  Aecon: (TSX: ARE) is a North American construction and infrastructure development company with global experience.

  3+ ansCandidates need post-secondary education in geomatics, surveying or civil engineering technology, plus 3 or more years of CAD, survey or geomatics experience. Proficiency in AutoCAD Civil 3D, MicroStation and Microsoft Office is required.

  AutoCAD Civil 3D, MicroStation, Microsoft Office, Trimble Business Center, ESRI, Bentley

  1 mois

  Drafting Manager

  Cambridge, ON

  95k–150k $/an

  A

  Aecon: (TSX: ARE) is a North American construction and infrastructure development company with global experience.

  7+ ans3+ gestionAecon needs a candidate with a diploma or degree in drafting, engineering technology or a related discipline, and at least 7 years of progressive drafting or design experience. Strong CAD and 3D modelling skills, leadership ability, and experience managing drafting standards and workload are also required.

  AutoCAD, Inventor, SolidWorks, Revit, Navisworks, MicroStation

  1 mois

  Draftsperson

  Bowmanville, ON

  70k–85k $/an

  A

  Aecon: (TSX: ARE) is a North American construction and infrastructure development company with global experience.

  5+ ansAecon needs candidates with an engineering design or drafting diploma and at least 5 years of drafting or engineering design experience. Candidates must be proficient in Autodesk Inventor and AutoCAD, understand structural fabrication drafting, and work accurately in shop and field conditions.

  AutoCAD, Autodesk Inventor, Revit, Fusion, Microsoft Word, Microsoft Excel

• 1 mois

  Draftsperson

  Calgary, AB

  

  PERI

  2+ ansCandidates need a diploma in a civil engineering technician or technology program and at least two years of AutoCAD experience. Drafting experience in formwork or scaffolding, and knowledge of concrete and structural steel construction, are assets.

  AutoCAD, PERI CAD tools

• 1 mois

  Dessinateur senior bilingue

  Quebec

  Temps plein

  

  Place et Forme inc

  5+ ansDEP en dessin industriel ou DEC en dessin technique ou génie mécanique; Minimum 5 ans d'expérience similaire; Bilinguisme français et anglais

  SolidWorks, AutoCAD, DraftSight

• 1 mois

  Dessinateur·trice Senior

  Québec, QC

  Temps plein

  

  Groupe Deric: est une entreprise de construction en grande croissance au Québec.

  5+ ans5 ans d’expérience dans un poste similaire; DEP, AEC ou DEC en dessin ou génie mécanique; Compréhension de plans et devis

  Revit, AutoCAD, SysQue, Suite Office

  1 mois

  Technicien.ne en génie mécanique

  Québec, QC

  Temps plein

  

  Groupe Deric: est une entreprise de construction en grande croissance au Québec.

  DEC ou BAC en génie mécanique complété; Expérience en gestion de projet de petite envergure; Connaissances en hydraulique et en automatisation (atout)

  SolidWorks, AutoCAD

5 entreprises