Emplois “Class 2 heavy equipment” au Canada – Page 45

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Snow Plow/Loader Operator (2475)

  Fort McMurray, AB

  Sur placeTemporaire

  

  Bouchier

  2+ ansCandidates need prior experience operating heavy equipment, highway maintenance experience and 2 to 5 years with GPS-guided equipment. Valid Class 1 and Class 3 licences, CSO and WHMIS 2015 certifications, and fluent English are required, along with the ability to work shifts in all weather.

  GPS operating system, snow plow, loader, dozer

  1 mois

  Class 1 or 3 - Skilled Utility Equipment Operator (2205)

  Fort McMurray, AB

  Sur placeTemps plein

  

  Bouchier

  2+ ansBouchier needs candidates with 2 to 5 years of heavy equipment experience and a valid Class 1 or 3 driver's licence. They also need a clean five-year driver abstract, safety tickets such as CSO and WHMIS 2015, the ability to lift 50 pounds, and fluent English.

  excavator, loader, dozer, grader, low bed

  1 mois

  Class 1 or 3 - Skilled Utility Equipment Operator (2200)

  Fort McMurray, AB

  Sur placeTemps plein

  

  Bouchier

  2+ ansCandidates need 2 to 5 years of heavy equipment experience, a valid Class 1 or 3 driver's licence and a clean five-year commercial driver abstract. They must hold CSO and WHMIS 2015 training, lift 50 pounds, work in hot, cold and wet conditions near water, and pass drug, alcohol and fit-for-duty tests.

  excavator, loader, dozer, grader, rock truck, plow truck

  1 mois

  Equipment Operator - Local (2410)

  Fort McMurray, AB

  Sur placeTemps plein

  

  Bouchier

  2+ ansCandidates need 2-5 years of heavy equipment operating experience, including GPS-guided systems, and a valid Class 5 licence (Class 1 or 3 for snowplow work). They must hold a CSO certificate and WHMIS 2015, be able to work shifts in all weather, lift up to 50 lbs, and communicate fluently in English.

  grader, loader, skid steer, snowplow, dozer, excavator

  1 mois

  Heavy Equipment Operator - Class 1 or 3 (2400)

  Fort McMurray, AB

  Sur placeTemporaire

  

  Bouchier

  2+ ansCandidates need 2-5 years of heavy equipment experience, including GPS-guided systems, and a valid Class 1 or 3 licence. They also need safety certifications such as CSO, WHMIS, TDG, OSSA confined space, ground disturbance, First Aid and H2S Alive, plus the ability to lift 50 lbs and work shifts in all weather.

  excavator, loader, dozer, grader, water truck, snow plow

  1 mois

  Heavy Duty Mechanic (Off Road)

  Fort McMurray, AB

  Sur placeTemps plein

  

  Bouchier

  5+ ansCandidates need a Red Seal or Alberta Journeyperson certificate as a heavy-duty technician, an Off-Road Certificate, and at least 5 years of experience. They also need a valid First Aid certificate, Class 5 licence, CSO and WHMIS, plus fluent English.

  Hoists, Hand tools, Diagnostic computer, Welding equipment

• 1 mois

  Landscaping Foreman/Woman – Irrigation (NOC 82031)

  Victoria, BC

  40 $/hSur placeTemps plein

  

  Garden City Tree and Landscape

  3+ ans2+ gestionCandidates need at least 3 years of landscaping or irrigation experience, including 2 years in a supervisory or crew lead role. A CIT Level 1 certification, a valid class 5 driver's licence and First Aid certification are required, along with strong irrigation knowledge and plan-reading skills.

  Bluebeam, CAD, LMN, Microsoft 365, skid steer, trencher

• 1 mois

  Skid Steer Operators - Winter Snow Removal

  Bedford, NS

  22–30 $/hSur placeContrat

  

  Trim Landscaping: Trim Landscaping is a Halifax landscape design-build company.

  2+ ansCandidates need 2+ years of snow removal or heavy equipment experience and a valid Class 5 driver's licence. They must be able to work outdoors in cold weather, respond quickly when called on-call, and lift up to 30 lbs.

  Skid steer, Loader, Snow plow attachment

• 1 mois

  Intermediate Piping Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  2+ ansCandidates need a mechanical engineering degree, EIT registration or eligibility in Ontario, and 2 to 5 years of mechanical design experience in heavy industry. Knowledge of piping stress analysis, nuclear codes, and software such as CAESAR II or ANSYS is expected.

  PipeStress, AutoPipe, ANSYS, MATLAB, MathCAD

  1 mois

  Junior/Intermediate Piping Layout Engineer/Designer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  2+ ansCandidates need a mechanical engineering degree and EIT registration or eligibility in Ontario, plus 2 to 5 years in heavy industry. Piping layout and stress analysis knowledge, along with strong communication and technical writing, are required.

  S3D

  1 mois

  Senior Piping Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  10+ ansCandu Energy needs a mechanical engineer with a P.Eng licence and at least 10 years of heavy-industry experience, ideally in nuclear piping, stress analysis and CANDU systems. Strong communication and technical writing skills are required.

  PipeStress, CAESAR II, AutoPipe, ANSYS Mechanical, MATLAB, MathCAD

  1 mois

  Senior Feeder Piping Analyst/Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  8+ ansCandidates need a P.Eng. (or eligibility) in Ontario, a mechanical engineering degree, and 8 to 10 years of heavy-industry experience, ideally nuclear. They must have ANSYS and piping stress analysis skills, know ASME Section III and CSA N285.0 standards, and communicate well in writing.

  ANSYS Mechanical, LS-DYNA, PipeStress, AutoPipe, MATLAB, MathCAD

  1 mois

  Senior Reactor Analysis Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  8+ ansCandu Energy needs a mechanical engineering graduate with at least 8 years of heavy-industry experience and strong stress analysis skills in ANSYS Mechanical, LS-DYNA or similar tools. Knowledge of ASME Section III, CSA N285.0 and N289 codes, and nuclear pressure boundary equipment is preferred, along with excellent written communication.

  ANSYS Mechanical, LS-DYNA, ABAQUS, MATLAB, MathCAD

  1 mois

  Senior Piping Supports Design Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  10+ ansCandidates need an engineering degree in mechanical or civil engineering, Professional Engineer registration or eligibility in Ontario, and at least 10 years of piping stress analysis experience in heavy industry. They must work independently on complex problems and be eligible for federal security clearance.

  PipeStress, Cesar II, AutoPipe, ANSYS, LS-DYNA, GT STRUDL

  1 mois

  Piping Supports Design Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  5+ ansCandidates need a mechanical or civil engineering degree and a Professional Engineer licence or eligibility in Ontario, plus five to ten years of piping stress analysis in heavy industry. They must know ASME and CSA piping codes and stress analysis software such as CAESAR II or PipeStress.

  PipeStress, AutoPipe, MathCAD, GT STRUDL, ANSYS, LS-DYNA

  1 mois

  Piping Stress Analyst Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  5+ ansCandidates need a mechanical engineering degree and P.Eng. registration or eligibility in Ontario, plus 5-10 years of heavy-industry mechanical engineering experience. Experience with pipe stress software, piping support design and ASME or CSA codes is required or preferred, and candidates must be eligible for security clearance.

  PipeStress, AutoPIPE, CAESAR II, MathCAD, ANSYS, LS-DYNA

  1 mois

  Senior Piping Stress Analyst Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  10+ ansCandidates need a mechanical engineering degree, Professional Engineer registration or eligibility in Ontario, and at least 10 years of heavy-industry mechanical engineering experience. Strong knowledge of piping stress codes, stress analysis software, and the ability to work independently and in multidisciplinary teams are required.

  PipeStress, AutoPipe, MathCAD, ANSYS, LS-DYNA, GT STRUDL

• 1 mois

  Truck Mechanic

  Saskatoon, SK

  Temps plein

  GE

  GFL Environmental Services Inc.

  Candidates need a journeyman certificate in truck and transport or heavy equipment, a Class 5 licence with a clean driver abstract, and strong mechanical troubleshooting skills. Experience with the SGI Motor Vehicle Inspection Program is an asset, and overtime is expected as needed.

  hand tools, storage toolbox

  1 mois

  Truck Mechanic

  Emerald Park, SK

  Temps plein

  GE

  GFL Environmental Services Inc.

  Candidates need a journeyman certificate in Truck and Transport or Heavy Equipment, a Class 5 licence with a clean abstract, and strong mechanical and troubleshooting skills. Experience with the SGI Motor Vehicle Inspection Program is an asset, and overtime must be possible.

  Hand tools, Storage toolbox

• 1 mois

  Field Operator

  Sarnia, ON

  Temps plein

  CA

  CANADA AIR LIQUIDE CANADA INC.

  2+ ansCandidates need 2+ years operating nitrogen equipment, pumpers and bulkers, plus 2+ years in oil and gas, petrochemical or heavy industrial settings. A Class 1 driver licence with off-road experience and mechanical aptitude is mandatory.

  nitrogen pumping equipment, pumpers, bulkers, pressure test equipment

• 1 mois

  Class 1 Delivery Truck Driver

  Canada

  16–35 $/h

  ED

  Eleven Distribution Canada Corp

  2+ ansCandidates need a valid Class 1 licence with a clean driver's abstract, at least 2 years of recent heavy truck experience, knowledge of safety rules and hours of service, and the ability to lift 50 lbs.

  logbook, smartphone, delivery truck

• 1 mois

  Class 3 Driver

  Regina, SK

  Temps plein

  UR

  United Rentals of Canada, Inc.

  2+ ansCandidates need a valid Class B CDL with a clean driving record and at least two years of DOT-regulated commercial driving. They also need a high school diploma or GED, strong customer service and communication skills, and a careful attention to safety.

  semi-truck, trailer, rollback, dove tail

• 1 mois

  Process Operator - Temporary, Multiple Openings

  Montréal, QC

  SE

  Suncor Energy Products Partnership

  5+ ansCandidates need five years of chemical-process experience or a DEC/AEC in chemical or industrial process techniques, a Class 4 static-equipment mechanic card, and a valid Class 5 licence. Fluent French, strong troubleshooting skills and teamwork are also required.

  control board, sampling equipment, ladders, scaffolds

• 1 mois

  Préposé(e) aux chambres / Guestroom Attendant (Temps partiel/Part-Time)

  Canada

  Temps partiel

  FS

  Four Seasons

  2+ ansCandidates need two years of housekeeping experience in a luxury setting, the ability to push, pull, lift and carry up to 50 lb, and good communication with a beginner level of English. They also need strong customer service skills and a valid work permit.

  Cleaning products, Cleaning equipment, Laundry equipment, Master keys

10 entreprises