Aucun filtre correspondant. Essayez un autre nom.
Kichton Construction
2+ ansCandidates need at least 2 years of experience as a Fuel and Lube Technician and must be physically fit, able to lift 50 lbs repeatedly, and able to climb ladders and work under machinery. A clean driver's abstract and comfort driving at night on rough terrain are also needed; a fuel truck and Class 3 licence are preferred.
fuel truck, service truck
Dawson Group: Dawson Group is family-owned construction and transportation company that has been in operation in British Columbia since 1922.
Candidates need to be a 3rd or 4th year Heavy Duty or Commercial Transport apprentice, or hold a Journeyman certificate, with a BC driver's licence of at least Class 5. Strong communication skills, the ability to do heavy physical work, and a focus on safety are also required.
diagnostic equipment, welding equipment
The Forest Group
Candidates need experience maintaining light and heavy vehicles, knowledge of automotive electronics, and skill with diagnostic tools. They must hold an Ontario Vehicle Operator's Permit Class G, have Grade 12 or equivalent, and strongly preferably an Ontario Motor Vehicle License 310T.
Scanners, Digital meters, Tire balancers, Brake lathes, AC filling and testing equipment, Hand tools
The Forest Group
3+ ansCandidates need a valid AZ licence, a background check within the last 30 days, and at least three years of tri-axle or tractor driving. They must know CVOR rules for logbooks, hours of service and cargo securement, and be safety conscious and able to drive in varied weather and traffic.
tractor, trailer, construction machinery
Caivan
Candidates need 0 to 1 year of residential construction labour experience, safe use of power and hand tools such as Paslode nailers, saws and impact drills, a valid driver's licence with a clean record, and the ability to lift at least 50 lbs in all weather.
Power saws, Impact drills, Hand tools, Transit
Randstad Canada
2+ ansCandidates need 2 to 3 years of hands-on CNC brake press experience in sheet metal or steel manufacturing. They must read blueprints, run programs without supervision, measure to tight tolerances, lift up to 50 lbs, and communicate well in English.
CNC brake press, calipers, micrometers, protractors
Randstad Canada
1+ ansCandidates need 1 to 2 years of hands-on mechanical assembly, warehouse or industrial repair experience. They should have strong mechanical aptitude, the ability to read schematics, good manual dexterity and a strong safety focus.
compressed air guns, rubber mallets, circlip pliers, grease guns, hoists, hydraulic presses
Randstad Canada
1+ ansCandidates need one to two years of hands-on mechanical assembly, warehouse or industrial repair experience. Strong mechanical aptitude, precise hand and power tool skills, and the ability to read schematics are required.
hydraulic press, pneumatic compressed air guns, overhead hoists, grease guns, circlip pliers, needle-nosed pliers
Randstad Canada
Candidates need a valid sit-down counterbalance forklift licence (an asset), some steel or heavy metals background (an asset), and the ability to lift up to 50 lbs daily. CSA-approved steel-toe safety footwear is required, and prior overhead crane experience is preferred.
Sit-down counterbalance forklift, Overhead crane
Randstad Canada
3+ ans3+ gestionCandidates need 3+ years of shift leadership for production supervisors or 5+ years of management for maintenance managers in an industrial setting. Strong mechanical knowledge, a safety-first approach under WorkSafeBC, and good leadership and communication skills are required.
CMMS software, ERP system, MS Office Suite, heavy equipment
Randstad Canada
Candidates need proven LTL or crossdock experience and strong forklift skills. They also need attention to detail, teamwork and a firm commitment to safety.
Forklift, Warehouse management system
Randstad Canada
Candidates need hands-on experience with metal grinding or manufacturing work, the strength to lift 50 lbs or more, and comfort working in non-climate-controlled plant conditions. Clear English communication, a strong safety mindset and CSA-approved steel-toed boots are also required.
Angle grinder, Stationary grinder, Pneumatic tools, Grinding wheels, Hand tools, Manual material handling equipment
Randstad Canada
1+ ansCandidates need one to two years of hands-on mechanical assembly, warehouse or industrial repair experience. Strong mechanical aptitude, precise hand and power tool skills, and the ability to read schematics are required.
hydraulic press, pneumatic compressed air guns, overhead hoists, grease guns, circlip pliers, needle-nosed pliers
Randstad Canada
1+ ansCandidates need at least 6 months of hands-on forklift experience and active certification on counterbalance, reach and BT stacker machines. They must be able to lift up to 50 lbs, commute reliably to Brampton and work in a fast-paced, standing environment.
BT Walkie, BT Stacker, Counterbalance forklift, Raymond Reach
Randstad Canada
Candidates need experience operating machines in a manufacturing setting and reading blueprints. They must be able to stand and lift up to 50 lbs, and show willingness to learn and attention to detail.
Biesse CNC, CNC machines, woodworking tools, hand tools, power tools
Randstad Canada
1+ ansCandidates need one to two years of hands-on mechanical assembly, warehouse or industrial repair experience. Strong mechanical aptitude, precise hand and power tool skills, and the ability to read schematics are required.
hydraulic press, pneumatic compressed air guns, overhead hoists, grease guns, circlip pliers, needle-nosed pliers
Randstad Canada
Candidates need a 3rd or 4th year apprenticeship or proven hands-on industrial mechanical experience, with direct work in a heavy or dirty manufacturing setting. Practical hydraulic knowledge is essential, and TIG and MIG welding experience is a strong asset.
Hydraulic equipment, TIG welder, MIG welder
Randstad Canada
3+ ansCandidates need at least 3 to 5 years of painting or sandblasting experience in manufacturing or automotive work, plus knowledge of chemical and high-pressure safety. Reliable transportation to Thamesville and the ability to lift heavy parts are also required.
Airless sprayers, Pressure pots, Blasting cabinets, Spray guns, Sandblasting machinery
Randstad Canada
2+ ansCandidates need at least 2 years of heavy vehicle mechanics experience and a DVS in heavy vehicle mechanics or equivalent experience. Strong knowledge of general mechanics, electricity, hydraulics and pneumatics, plus repair welding skills, is required.
diagnostic equipment, welders, torches, blueprints, schematics
10 entreprises