Emplois “hydraulic testing equipment” au Canada – Page 6

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 6j

  Millwright

  Nisku, AB

  40 $/hContrat

  

  Randstad Canada

  Candidates need an active Alberta Journeyperson Millwright ticket or Red Seal endorsement, plus proven hands-on gearbox rebuild and hydraulic repair experience. Strong diagnostic skills and clear English for logging repairs are also required.

  Laser alignment equipment, Dyno test equipment, Hydraulic test equipment

  6j

  Wet Test Technician

  Mission, BC

  32–38 $/hTemps plein

  

  Randstad Canada

  2+ ansCandidates need at least 2 years of hands-on experience with concrete pumping equipment, including boom and line pumps. A valid BC Class 5 licence with a clean driving record is required, and an Air Brake endorsement is an asset.

  MS Office, diagnostic tools, hydraulic test equipment, concrete pump trucks

• 6j

  Heavy Equipment Technician

  Clairmont, AB

  Temps plein

  ?

  Structured technical training and PowerGen qualification; Identify equipment faults, abnormal operating conditions and failure causes; select appropriate corrective actions within your qualifications and authorization;…

  Heavy duty technician, Mechanical systems, Hydraulic fracturing, Troubleshooting, Coaching, Troubleshoot

• 6j

  PowerGen Technician

  Clairmont, AB

  Temps plein

  ?

  Support inspections and fault diagnosis of generator controls, protection devices, switchgear and three-phase distribution systems, including 480-volt systems, within your qualifications…; What You Bring — Required;…

  Troubleshoot, Natural gas, Hydraulic fracturing, Technical support, Fuel gas, Communication skills

• 6j

  Engineer Co-op

  Canada

  Temps plein

  VI

  Vaderstad Industries Inc (VII)

  Candidates need enrollment in a Mechanical Engineering degree program and good Microsoft Office skills. Knowledge of Creo or similar CAD, hydraulics, electronics, pneumatics and structural design is an asset, as is familiarity with modern farming equipment.

  Creo, Microsoft Office

  6j

  FEA Analyst

  Canada

  Temps plein

  VI

  Vaderstad Industries Inc (VII)

  2+ ansCandidates need a bachelor's degree in mechanical engineering or a related field and 2-3 years of FEA work in manufacturing. They must know FEA tools such as ANSYS, Abaqus or HyperMesh and be able to read engineering drawings, GD&T and 3D CAD models.

  ANSYS, Abaqus, HyperMesh, OptiStruct, CAD

  6j

  Sr. Design Engineer

  Canada

  Temps plein

  VI

  Vaderstad Industries Inc (VII)

  4+ ansCandidates need a university engineering degree, four to six years of progressive engineering experience (design preferred), and strong computer skills in Creo or equivalent CAD and Microsoft Office. Knowledge of hydraulics, pneumatics, electronics and farming equipment is an asset.

  Creo, Microsoft Office

• 6j

  Heavy Equipment Mechanic

  Saulnierville, NS

  Temps plein

  CS

  Comeau Sea Foods Limited

  Candidates need a high school diploma and certification as a heavy equipment mechanic or a registered apprenticeship. A valid driver's licence with a clean record, strong knowledge of diesel, hydraulic and air brake systems, and comfort with physically demanding work are also required.

  diagnostic tools, forklift, hydraulic tools, hand tools

• 6j

  Work Equipment Maintainer

  Saskatoon, SK

  ?

  POSITION REQUIREMENTS:; Must be at least 18 years of age; Valid driver’s license

  Troubleshooting, Heavy equipment operation, Equipment maintenance, Documentation, Valid driver's licence, Journeyperson

• 6j

  Work Equipment Maintainer

  Saskatoon, SK

  Temps plein

  C

  CPKC

  Candidates need a Journeyman's Certificate as a Heavy-Duty or Automotive Mechanic/Technician, or be an active 2nd or 3rd year Heavy-Duty apprentice, plus hydraulic, electrical and pneumatic repair experience and basic welding skills. A valid driver's licence and high school diploma or equivalent are required.

  hydraulic tools, electric tools, welders, cutting torches, ballast regulators, loaders

• 6j

  Maintenance Tech

  Camrose, AB

  26–28 $/hTemps plein

  PP

  PERMA PIPE INC

  Candidates need hands-on mechanical and electrical maintenance skills, the ability to read blueprints and schematics, and experience with machine tools such as lathes, grinders and welders. They must pass a drug test, work 10-hour shifts with frequent standing and walking, and commit to safety.

  lathe, grinder, welder, hand tools, hydraulic equipment, PPE

• 6j

  Industrial Millwright Mechanic

  Lantz, NS

  Temps plein

  TS

  The Shaw Group

  Candidates need a Licensed Millwright-Industrial Mechanic licence and proven industrial mechanic experience. Skills in hydraulics, motors, automation and logic controllers, plus rebuild and preventive maintenance experience, are required. Concrete or precast equipment experience is a strong asset.

  CMMS, PLC, Welding equipment

• 6j

  Senior Maintenance Technician

  Glencoe, ON

  Sur placeTemps plein

  

  Penta Equipment Inc.: Penta Equipment is an agricultural manufacturing company with four production facilities throughout southwestern Ontario, Canada.

  5+ ansPenta Equipment Inc. needs candidates with 5-7 years of industrial maintenance, millwright, electrical or related skilled trades experience. Candidates must troubleshoot industrial equipment, work with mechanical, hydraulic, pneumatic and electrical systems, and operate forklifts, cranes and welding equipment.

  Fiix, Hand and power tools, Welding equipment, Gauges and meters, Forklift, Skid steer

• 6j

  Maintenance Foreperson

  Langley, BC

  45,96–57,45 $/h

  

  Amrize

  5+ ans2+ gestionCandidates need at least 5 years of equipment maintenance experience, including 2 years in a leadership or supervisory role. They need strong mechanical skills across heavy equipment, hydraulics, electrical systems and welding, and must be physically fit and able to work in extreme weather.

  CMSS, asphalt plant equipment, welding equipment

• 6j

  Automotive Mechanic

  Dartmouth, NS

  40,24 $/h

  

  Halifax Regional Municipality

  5+ ansCandidates need a valid Red Seal Automotive Service Technician licence, five years of fleet vehicle repair experience including at least twelve months as a licensed mechanic, and a Nova Scotia Motor Vehicle Safety Inspection licence or willingness to obtain one. They also need a valid driver's licence with a good record, Grade 12 or equivalent, and their own hand tools.

  hand tools, computerized work order system

  6j

  Automotive Mechanic

  Dartmouth, NS

  40,24 $/h

  

  Halifax Regional Municipality

  5+ ansCandidates need a valid Red Seal Automotive Service Technician licence, five years of fleet vehicle repair experience including at least twelve months as a licensed mechanic, and a Nova Scotia Motor Vehicle Safety Inspection licence or willingness to obtain one. They also need a valid driver's licence with a good record, Grade 12 or equivalent, and their own hand tools.

  hand tools, computerized work order system

• 6j

  Industrial Mechanic/Millwright Journeyperson

  Saskatoon, SK

  Temps plein

  CS

  Certified Sales & Rentals

  Candidates need a Red Seal Industrial Mechanic/Millwright certificate and experience moving, assembling and repairing heavy machinery. Strong knowledge of hydraulics, electronics, pumps, gearboxes and motors, welding and machining, and the ability to lift up to 50 pounds frequently, are also required.

  cranes, forklifts, telehandlers, hand tools, power tools

• 6j

  Maintenance Mechanic / Millwright – Brampton

  Brampton, ON

  38,07–40,83 $/h

  WR

  Worklynx Recruitment

  Candidates need a high school diploma, strong troubleshooting and problem-solving skills, and the ability to work independently and in a team. A Maintenance Mechanic or Millwright licence is preferred, and a Stationary Engineer Certificate and electrical experience are assets.

  Forklift, Boiler, Compressor, Conveyor, Corrugator, Slitter

• 6j

  Heavy Duty Technician (RSE) - Shop/Field

  Langley, BC

  51,50 $/hTemps plein

  

  Wajax: operates an integrated distribution system providing sales, parts and services to a broad range of customers in diverse sectors of the Canadian…

  2+ ansCandidates need a valid Red Seal Endorsement and 2-3 years of heavy equipment or off-road service experience. Strong mechanical aptitude, problem-solving, and clear written and verbal communication with customers are required.

• 6j

  Millwright / 3rd-Year Apprentice

  Mississauga, ON

  42,21–45,16 $/hTemps plein

  JE

  Johnson Electric North America, Inc.

  1+ ansCandidates need a secondary school diploma or equivalent and one to five years of industrial maintenance experience in manufacturing. They need hands-on mechanical skills, working knowledge of hydraulic, pneumatic and electrical systems, and the ability to read mechanical drawings.

  rigging equipment, hand tools, CNC equipment, PLC, robots

  6j

  Licensed Electrician / 3rd-Year Electrical Apprentice

  Mississauga, ON

  42,21–45,16 $/hTemps plein

  JE

  Johnson Electric North America, Inc.

  1+ ansCandidates need a valid 442A or 309A Electrician Certificate of Qualification and a completed electrician apprenticeship, plus 1 to 5 years of industrial electrical maintenance experience in manufacturing. Strong hands-on controls troubleshooting and the ability to read schematics and technical manuals are required.

  PLC, CNC, Fanuc robot, VFD

  6j

  Millwright

  Stratford, ON

  45–50 $/hTemps plein

  JE

  Johnson Electric North America, Inc.

  1+ ansCandidates need one to five years of industrial maintenance experience in manufacturing, plus hands-on mechanical skills and working knowledge of hydraulic, pneumatic and basic electrical systems. Secondary school diploma or equivalent is required, and a Red Seal or provincial Millwright certificate is a bonus.

  CNC equipment, PLC, robotic equipment, rigging and lifting devices, hand tools

• 6j

  Sr. Energy Marshal

  Brampton, ON

  I

  Integra

  10+ ansIntegra needs candidates with 10 to 12+ years of electrical or mechanical field experience, OSHA 30 and NFPA 70E training, and the ability to read electrical drawings. Strong hands-on skill in energizing equipment, lockout/tagout and electrical safety is essential.

  Electrical drawings, MV/LV switchgear, UPS, Generators, Building management systems

• 6j

  Diesel Technician Trainee

  Cambridge, ON

  19,50 $/hTemps plein

  RT

  Ryder Truck Rental Canada Ltd. (Employer-Payroll)

  Candidates need to be 18 or older, fluent in English, and hold a valid driver's licence. Strong customer service, teamwork, time management, and a good attendance record are required, with a high school diploma and basic computer and machine knowledge preferred.

  service bay tools, Microsoft Office, shop management systems

16 entreprises