Emplois “manual lathe” au Canada – Page 8

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Machinist - Manufacturing Associate III - Machine Shop

  Ottawa, ON

  

  Lee Valley Tools

  3+ ansCandidates need a high school diploma or machining trade education and about 3 years of manufacturing experience, ideally in a machine shop. They must read manufacturing drawings, use precision measuring tools and hand tools, and work both alone and in a team.

  Haas lathe, CNC grinder, CNC vertical mill, CNC horizontal mill, CMM, Micrometer

  1 mois

  Machinist

  Ottawa, ON

  29–32 $/h

  

  Lee Valley Tools

  Candidates need a secondary school education plus a four-year machinist apprenticeship, or more than four years of experience with a college diploma in machining. They must have advanced manual and CNC machining skills, CAM and conversational programming knowledge, and the ability to read GD&T drawings.

  CNC mill, CNC lathe, Manual mill, Manual lathe, Surface grinder, GibbsCAM

• 1 mois

  Licensed Millwrights - Days/Afternoons

  Woodstock, ON

  

  Vuteq Canada Inc.

  2+ ansCandidates need a valid Maintenance Millwright 443A certificate of qualification and at least two years of practical experience. Knowledge of hydraulics, pneumatics and electricity is an asset, along with WHMIS training and a valid driver's licence.

  Lathes, Milling machines, Precision measuring tools, Hand and power tools

• 1 mois

  Millwright- Continental Day Shift

  Woodbridge, ON

  Temps plein

  PI

  Pliteq Inc

  4+ ansCandidates need a Certified Industrial Mechanic Millwright (433A) designation, completed secondary school, a recognized Millwright apprenticeship or equivalent, and at least 4 years of industrial manufacturing experience. Strong mechanical and electrical skills, PLC and motor control knowledge, and a clear criminal record check are also required.

  PLC, bench grinder, lathe, milling machine, drilling machine, counterbalance forklift

  1 mois

  Millwright- Continental Night Shift

  Woodbridge, ON

  Temps plein

  PI

  Pliteq Inc

  4+ ansCandidates need a Certified Industrial Mechanic Millwright (433A) designation, completed secondary school and a recognized Millwright apprenticeship, and at least 4 years of millwright experience in industrial manufacturing. Strong mechanical and electrical knowledge, PLC and motor control skills, and the ability to lift 50 lbs and work at heights are also needed.

  lathe, milling machine, bench grinder, forklift, elevated work platform, maintenance software

  1 mois

  Junior Electrical Engineering

  Woodbridge, ON

  Temps plein

  PI

  Pliteq Inc

  1+ ansCandidates need one to five years of electrical and mechanical troubleshooting in manufacturing, an engineering degree or diploma from a Canadian institution, and P.Eng. or EIT status. Strong PLC programming skills and CAD experience are also needed.

  PLC (Allen-Bradley), AutoCAD, SolidWorks, ERP, lathe, milling machine

• 1 mois

  Machinist, Journeyperson

  Elkford, BC

  52,31 $/hTemps plein

  

  SMS Equipment Inc.: is the premier equipment solutions provider for the mining, construction, road construction, and forestry industries.

  3+ ansCandidates need a Machinist Journeyperson credential and at least 3 to 5 years of similar experience, including heavy equipment and line boring work. They must use precision measuring tools, work with minimal supervision and follow strict workplace safety rules.

  lathe, milling machine, horizontal boring mill, vertical boring mill, drill press, precision measuring tools

• 1 mois

  General Machinist - Reman

  Bradford, ON

  Temps plein

  

  Toromont Cat: Established in 1993, Toromont Cat is a division of Toromont Industries (TSX: TIH), a publically traded, diversified growth company incorporated in…

  3+ ansCandidates need at least 3 years as a general or automotive machinist in a custom or tool room setting, plus a General Machinist Red Seal certificate. Strong CNC and manual machining skills, precision measurement ability, and flexibility with changing work are required.

  CNC lathe, Manual lathe, Horizontal boring mill, Vertical mill, Micrometers, Calipers

• 1 mois

  Manual Machinist (SACS)

  Winnipeg, MB

  Temps plein

  

  StandardAero

  5+ ansCandidates need at least Level 3 machining from an apprenticeship or equivalent training, plus 5 or more years of manual machining experience. They must read blueprints well, use precision measuring tools, solve problems mathematically, lift up to 50 pounds and stand for long periods.

  lathe, calipers, micrometers, gauges, hand tools

• 1 mois

  Skilled Trade - Tool and Die Maker - Oakville, ON

  Oakville, ON

  53 $/hSur placeTemps plein

  

  Ford BlueOvalCity\/TEVC

  8+ ansCandidates need a completed tool and die apprenticeship with a Certificate of Qualification 430A, or eight years of trade experience after earning it. They must be able to work days, afternoons and midnights on a rotating schedule.

  CNC milling machines, Lathes, Milling machines, Surface grinders, Radial drills, Stick and TIG welding equipment

• 1 mois

  Mechanical Technician - Machinist

  Bedford, NS

  Sur placeTemps plein

  

  Innovasea

  3+ ansCandidates need a machinist or mechanical engineering technician credential, 3-5 years of CNC programming and operating experience, and manual machining experience. Strong 3D CAD and mechanical design skills, plus good communication and teamwork, are required.

  CNC milling machine, Manual lathe, Manual mill, Haas CNC, Mastercam, SolidWorks

• 1 mois

  CNC Operator (Machine Shop) Intermediate - Afternoon Shift

  Etobicoke, ON +1

  Sur placeTemps plein

  SM

  S&C Minimal

  1+ ansCandidates need at least one year of hands-on experience setting up and operating manual and computer-controlled machines such as mills, lathes and presses. They should read blueprints, use precision measuring tools, handle basic math and computers, and follow health, safety and environment procedures.

  CNC machines, Verticals, Mills, Lathes, Presses, Drills

• 1 mois

  CNC Machinist

  North Vancouver, BC

  Sur placeTemps plein

  

  Mantech Enterprises

  5+ ansCandidates need at least 5 years of CNC machining experience, with journeyman, Red Seal or equivalent standing. Knowledge of CAD/CAM, CNC milling and lathes, and ERP systems is required, along with good communication and problem-solving skills.

  CNC mill, CNC lathe, manual machine tools, CAD/CAM software, Fusion, ProShop ERP

• 1 mois

  Shop Supervisor

  Edmonton, AB

  35–40 $/hSur placeTemps plein

  HM

  Hawk Machine Works

  5+ ans3+ gestionHawk Machine Works needs a candidate with 5 or more years of production machining experience and 3 or more years supervising a shop team. CNC and manual machining knowledge, the ability to read engineering drawings and GD&T, and strong communication under pressure are required.

  lathe, mill, engineering drawings, ERP/scheduling system, overhead crane, forklift

• 1 mois

  Journeyman Machinist

  Sherwood Park, AB

  Sur placeTemps plein

  

  Blackstone Industrial Services Inc: Blackstone’s service network routinely installs commissions, overhauls, and repairs equipment from any original manufacturer.

  5+ ansCandidates need a Journeyman Machinist ticket and 5+ years of machining experience, plus the ability to read technical drawings and use precision measuring tools. A valid class 5 driver's licence is required and overhead crane, rigging, forklift, first aid and SCBA certifications are assets.

  CNC lathe, CNC mill, manual lathe, manual mill, micrometers, calipers

• 1 mois

  Machinist

  British Columbia

  Sur placeTemps plein

  

  Ralmax

  Candidates need the ability to read blueprints and technical manuals and to work accurately under productivity demands. A high school diploma is preferred, a Red Seal Journeyman Machinist certificate and job shop experience are assets, and a valid driver's licence and basic hand tools are required.

  lathe, milling machine, boring mill, line boring equipment, micrometer, caliper

• 1 mois

  CNC Machine Operator - Brampton, ON (On-site)

  Brampton, ON

  23 $/hTemps plein

  VC

  Victaulic Company of Canada ULC

  2+ ansVictaulic Company of Canada ULC needs candidates with at least 2 to 5 years of CNC lathe and milling experience and strong blueprint reading skills. Candidates must also be able to use measuring instruments and tools and follow engineering instructions. Crane training is an asset.

  CNC lathe, CNC milling machine, Precision measuring instruments, Hand tools, Power tools

• 1 mois

  CNC Machinist

  Ontario

  Temps plein

  

  Masco Canada Limited

  Candidates need a machinist certificate of qualification or apprenticeship, with programming ability on CNC lathes such as Citizen, Hanwha, Miyano and Hardinge. Strong blueprint reading, measuring, troubleshooting and JDE experience are also required.

  CNC lathes, Citizen, Hanwha, Miyano, Hardinge, Fanuc

  1 mois

  CNC Machinist

  Ontario

  Temps plein

  

  Masco Canada Limited

  Candidates need a Certificate of Qualification as a Machinist, an apprenticeship certificate and OSSD or equivalent. Strong CNC programming and blueprint reading are required, with Swiss-style lathe experience (Hanwha or Fanuc) preferred.

  CNC lathes (Citizen, Hanwha, Miyano, Hardinge), JDE system, Measuring and gauging devices

• 1 mois

  Sr Machinist

  Hamilton, ON

  Sur placeTemps plein

  CM

  CAN MOT|20900 Motion Canada Inc.

  Candidates need prior machinist experience, hands-on manual operation of lathes, mills and keyseaters, and precision measuring skills. Strong math, basic computer skills and the ability to lift 50 lbs are also needed.

  Lathe, Keyseater, Micrometer

  1 mois

  Sr Machinist

  North Bay, ON

  37,04–49,63 $/hSur placeTemps plein

  CM

  CAN MOT|20900 Motion Canada Inc.

  5+ ansCandidates need five or more years of shop experience, a high school diploma or equivalent, and knowledge of metals, measurement and CAD/CAM software. Advanced knee mill and WEDM experience and proficient MIG/TIG welding on aluminum and stainless steel are also required.

  Lathe, Milling machine, Grinder, Acer knee mill, WEDM, Micrometer

• 1 mois

  Machine Operator - Blanching

  Welland, ON

  Temps plein

  IC

  Indexable Cutting Tools of Canada

  1+ ansCandidates need a high school diploma or GED and at least one year of machine shop experience. They must read blueprints accurately, do precise metric and fractional math, and use micrometers and calipers.

  lathe, milling machine, grinder, shaper, micrometer, caliper

  1 mois

  Machine Operator

  Welland, ON

  Temps plein

  IC

  Indexable Cutting Tools of Canada

  1+ ansCandidates need at least one year of machine shop experience and a high school diploma or GED. They must read blueprints accurately, convert metric to inch and decimal to fraction, and use micrometers and calipers.

  lathe, milling machine, grinder, shaper, micrometer, caliper

• 1 mois

  Manual Machinist

  Mississauga, ON

  39,24 $/hTemps plein

  II

  ITI Indal Technologies Inc

  5+ ansCandidates need high school plus two years of technical training and over five years of manual lathe experience. They must solve technical problems, read blueprints, and communicate well both orally and in writing.

  Manual lathe, Milling machine, Drill press, Grinder, Jig bore, Air-hydraulic press

18 entreprises