Emplois “Pressure gauge” au Canada – Page 9

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Journeyperson Pipefitter (Night Shift)

  Calgary, AB

  Temps plein

  

  Startec

  Candidates need a Journeyman Pipefitter certification or equivalent and proven pipefitting experience. They also need blueprint reading skills, knowledge of pipe materials and codes, and good physical condition.

  Flame cutting torch, Overhead crane, Jib crane, Welding equipment

  1 mois

  Journeyperson Instrumentation Technician

  Calgary, AB

  Temps plein

  

  Startec

  5+ ansCandidates need a journeyperson certification in Instrumentation or a related trade and typically 5+ years of instrumentation installation and testing in a fabrication environment. Passing a drug and alcohol test and pneumatic testing before onboarding is required.

  Electric benders, Pressure gauges, Flow meters

• 1 mois

  CAN: Mechanic

  Barrie, ON

  Temps plein

  

  MV Transportation: MV Transportation is a leading transit services provider in the United States, partnering with over 100 transit agencies and municipalities, schools…

  3+ ansCandidates need a Truck and Coach Technician Certificate (310T), a valid Ontario G licence (B or C with Z endorsement preferred), and at least three years of preventive maintenance experience in the bus industry. Strong diagnostic, documentation and problem-solving skills are required, and air conditioning experience is preferred.

  Diagnostic computer equipment, Pressure gauges, Hoists, Hydraulic jacks, Tow motors, Drill presses

  1 mois

  Apprentice Mechanic

  Barrie, ON

  Temps plein

  

  MV Transportation: MV Transportation is a leading transit services provider in the United States, partnering with over 100 transit agencies and municipalities, schools…

  3+ ansCandidates need a high school diploma or equivalent, a valid Ontario G licence (B or C with Z endorsement preferred) and at least 3 years of driving with a clean record. An automotive or truck and coach mechanic certificate is preferred, and experience with diagnostic software and hand and power tools is needed.

  Computer diagnostic equipment, Pressure gauges, Hoists, Hydraulic jacks, Tow motors, Drill presses

• 1 mois

  Metallurgist

  Red Lake, ON

  

  Evolution Mining Limited

  Candidates need a bachelor's degree in Metallurgical Engineering or a similar discipline, plus strong data analysis, spreadsheet and analytical skills. Strong communication, organization and the ability to work well under pressure are also required.

  Nuclear density gauge

• 1 mois

  Mechanic/Mechanical Assembler

  Collingwood, ON

  24–31 $/h

  ME

  MACLEAN ENGINEERING & MARKETING CO. LIMITED

  Candidates need some hands-on experience with heavy equipment or industrial machinery, basic knowledge of diesel, hydraulic and brake systems, and the ability to follow technical instructions and safety procedures. A high school diploma or certificate and a valid driver's licence are required.

  overhead crane, gantry crane, pneumatic tools, hydraulic tools, multimeter, pressure gauge

• 1 mois

  Manufacturing Engineering Technologist

  Ingersoll, ON

  

  IMT CORPORATION

  Candidates need a 3-year post-secondary diploma in mechanical or manufacturing engineering technology, or equivalent experience, plus experience in CNC programming, robotics and tooling. New graduates are welcome. Canadian citizens or permanent residents only.

  Fanuc, Okuma, SolidWorks, CAD/CAM software, gauging systems

• 1 mois

  Service Technician I

  Edmonton, AB

  25,84–38,76 $/hTemps plein

  

  Clean Energy

  2+ ansClean Energy requires basic mechanical or electrical knowledge, basic computer skills with service software, a Gas Fitter Class B licence and a valid driver's licence. A high school diploma is preferred, plus at least 2 years of related experience.

  Field Service Automation software, Microsoft Office, Tablets, Gauges, Frequency drives, Solenoids

  1 mois

  Service Technician I

  Fort McMurray, AB

  25,84–38,76 $/hTemps plein

  

  Clean Energy

  2+ ansClean Energy needs candidates with basic mechanical or electrical knowledge, basic computer skills, a Gas Fitter Class B licence and a valid driver's licence. A high school diploma is preferred, plus at least two years of related experience.

  Field Service Automation (FSA) software, Microsoft Office, tablet, compressors, pumps, valves

• 1 mois

  Prep Technician

  North Bay, ON

  22,35 $/hTemps plein

  

  Voyageur Aviation: Voyageur Aviation is a specialized aviation company who prides itself on delivering unique and innovative solutions.

  Candidates need mechanical experience (preferred), attention to detail and the ability to read manuals and follow verbal instructions. Aviation experience is an asset, and the role needs a clear criminal background check and legal eligibility to work in Canada.

  micrometer, height gauge, calipers

• 1 mois

  Toolroom Technician

  Midland, ON

  Temps plein

  

  Baytech Plastics Inc

  Candidates need working knowledge of machining, mold making, hydraulics, electrical work, welding and WHMIS, plus computer skills. Shift and on-call availability, strong communication, leadership and a willingness to learn new technology are required.

  Caliper, Micrometer, Height gauge, Overhead crane, Tow motor

• 1 mois

  Sprinkler Service Fitter

  Markham, ON +7

  Temps plein

  

  BGIS

  3+ ansCandidates need a Sprinkler Fitter apprenticeship or equivalent, plus 3 to 5 years of experience with sprinkler, standpipe and fire pump systems. They must know NFPA 13, 20 and 25 and be able to read drawings and communicate clearly.

  Pressure gauges, Flow testing equipment

  1 mois

  Stationary Engine Mechanic

  Québec, QC

  Temps plein

  

  BGIS

  3+ ansBGIS needs candidates with Class 4 B stationary engineer certification and up to three or more years of experience. Candidates should know boiler, chiller and generator operation, troubleshoot mechanical problems, and write clear shift logs and reports.

  boilers, chillers, diesel generator, hand tools, power tools, computerized control systems

  1 mois

  Stationary Engine Mechanic

  Matane, QC

  Temps plein

  

  BGIS

  3+ ansBGIS needs candidates with Class 4 B stationary engineer certification and up to three or more years of experience. Candidates should know boiler, chiller and generator operation, troubleshoot mechanical problems, and write clear shift logs and reports.

  boilers, chillers, diesel generator, hand tools, power tools, computerized control systems

  1 mois

  Sprinkler Service Fitter

  Markham, ON +12

  Temps plein

  

  BGIS

  3+ ansCandidates need a Sprinkler Fitter apprenticeship or equivalent, a valid provincial journeyperson certification and a driver's licence, plus 3-5 years working with sprinkler, standpipe and fire pump systems. Knowledge of NFPA 13, 20 and 25 and the ability to read drawings and hydraulic calculations are also needed.

  gauges, fire pump test equipment

  1 mois

  Stationary Engine Mechanic

  Matane, QC

  Temps plein

  

  BGIS

  3+ ansBGIS needs candidates with Class 4 B stationary engineer certification and up to three or more years of experience. Candidates should know boiler, chiller and generator operation, troubleshoot mechanical problems, and write clear shift logs and reports.

  boilers, chillers, diesel generator, hand tools, power tools, computerized control systems

  1 mois

  Stationary Engine Mechanic

  Québec, QC

  Temps plein

  

  BGIS

  3+ ansBGIS needs candidates with Class 4 B stationary engineer certification and up to three or more years of experience. Candidates should know boiler, chiller and generator operation, troubleshoot mechanical problems, and write clear shift logs and reports.

  boilers, chillers, diesel generator, hand tools, power tools, computerized control systems

• 1 mois

  Journeyman Appliance Technician - Future Opportunities

  Saskatchewan

  Sur placeTemps plein

  

  ATCO

  3+ ansCandidates need a journeyperson appliance technician certification, 3 to 5 years of appliance repair experience and a General Gas Fitter License. They also need Fall Arrest, Confined Space and Elevated Work Platform certificates and strong communication and safety skills.

  ServiceMax, Microsoft Word, Microsoft Excel, Outlook, meters, gauges

• 1 mois

  Plumbers

  Alberta

  Temps plein

  

  Civeo

  5+ ansCandidates need a Journeyman Plumber certification, a Gasfitter Class B ticket and at least 5 years of construction experience. Safety certifications such as Fall Protection, Confined Space, CSTS and First Aid are also required.

  hand tools, power tools, pressure gauges, soldering equipment, brazing equipment, welding equipment

  1 mois

  Journeyperson Plumber/Gasfitter

  Alberta

  Temps plein

  

  Civeo

  5+ ansCandidates need Journeyperson Plumber certification, a Gasfitter Class B ticket and at least 5 years of construction experience. They also need several safety tickets, a class 5 licence and the ability to lift up to 50 lb.

  Hand tools, Power tools, Pressure gauges, Soldering, brazing and welding equipment

• 1 mois

  Plant Terminal Operator Technician

  Sarnia, ON

  Sur placeTemps plein

  

  SGS

  Candidates need a high school diploma or equivalent and 0 to 1 years of relevant experience. Previous petroleum refinery experience is a strong asset, along with comfort working outdoors, rotating shift availability and the ability to follow work instructions accurately.

  Gauges, Loading arms, Hoses, Locomotive, Firefighting equipment

  1 mois

  Petroleum Inspector

  Montréal-Est, QC

  Sur placeTemps plein

  

  SGS

  3+ ansCandidates need a high school diploma and at least 3 years of relevant or equivalent experience. Post-secondary training in cargo inspection, petroleum experience, and strong attention to detail, communication and the ability to work irregular hours are assets.

  Sampling equipment, Calibration equipment

• 1 mois

  Flight Test Instrumentation Specialist

  London, ON

  120k–130k $/anSur placeTemps plein

  IC

  ITPS (Canada) LTD

  5+ ansCandidates need a degree or diploma in electrical engineering, avionics, aerospace engineering or a related field, plus 5 or more years of experience with aircraft systems, flight test and telemetry. Four years of on-the-job or apprenticeship training is required, along with knowledge of data acquisition systems and sensors and the ability to work in flightline and hangar environments.

  IADS, strain gauges, thermocouples, pressure transducers, ground station

• 1 mois

  Service Coordinator

  Abbotsford, BC

  Sur placeTemps plein

  

  Clearbridge Business Solutions

  4+ ansCandidates need 4 to 6+ years in customer-facing service, coordination or operations, with strong communication, active listening and emotional intelligence. Clearbridge prefers experience in managed services, consulting or fast-paced service environments.

  Dispatching, Communication skills, Listen actively, Prioritization

14 entreprises