Emplois “Certificate of Airworthiness” au Canada – Page 10

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Intégrateur(trice) en conception aérospatiale / Aerospace Design Integrator

  Montréal, QC

  

  Capgemini

  5+ ansCandidates need an engineering degree, 5 to 7 years of design or integration experience, and aerospace background. They must know engineering change processes, airworthiness and certification requirements, and be fluently bilingual in English and French.

  1 mois

  Air Systems Integrator

  Montréal, QC

  

  Capgemini

  5+ ansCandidates need a bachelor's degree in aerospace, mechanical engineering or a related field and 5+ years of aircraft systems engineering or integration experience, ideally in a regulated setting. Experience with air, environmental control or pneumatic systems is a major asset.

  CAD, requirements management tools, system modeling tools, configuration management tools

  1 mois

  Avionics Integrator Engineer (Hybrid: Montreal, Quebec)

  Montréal, QC

  

  Capgemini

  5+ ansCandidates need a bachelor's degree in aerospace, systems or a related technical field, plus 5 to 10 or more years of avionics development and integration experience. Part 25 certified aircraft experience, supplier management, and test planning are required.

  Procurement, Leadership, Aerospace engineering, ICT system integration, Systems development life-cycle, Adaptability

• 1 mois

  Aircraft Maintenance Engineer 2-3

  Shubenacadie, NS

  

  The Government of Nova Scotia

  Candidates need a Transport Canada Aircraft Maintenance Engineer licence in the M1 and/or M2 category and an approved maintenance training program. The Level 3 role also requires two years of licensed experience and Airbus H125 and Safran Arriel 2 type training, plus a Nova Scotia Class 5 driver's licence and the ability to respond to Shubenacadie within 1 hour while on call.

  WinAir

• 1 mois

  CF 18 AME (M) Level A

  Cold Lake, AB

  47k–87k $/an

  

  L3Harris Technologies

  Candidates need a Transport Canada recognized AME Basic Training Program with an M (Mechanical) rating. They must be eligible for Controlled Goods Program registration, Reliability status, Level 2 (Secret) clearance and ITAR requirements.

  borescope, engine test cell, aerospace maintenance support equipment

  1 mois

  CF 18 AME (S) Level A

  Cold Lake, AB

  47k–87k $/an

  

  L3Harris Technologies

  Candidates need graduation from a TCCA-recognized AME Basic Training Program with an M (Mechanical) rating. They must be eligible for Controlled Goods Program registration, Reliability status, a Level 2 (Secret) clearance and ITAR requirements.

  Powered and electric tools, Aerospace Maintenance Support Equipment, Alodine application equipment, Heat treatment equipment

  1 mois

  Aircraft Maintenance Engineer - Avionics

  Ottawa, ON

  44,82–58,60 $/h

  

  L3Harris Technologies

  5+ ansCandidates need a Transport Canada AME E licence with A330 qualifications and at least 5 years on A330 aircraft. They must be eligible for Controlled Goods Program registration, Canadian government Reliability status, Secret Level 2/NATO Secret clearance, and ITAR requirements.

  Standard measuring and test equipment, Microsoft Office

  1 mois

  Aircraft Maintenance Engineer (AME) - Structures

  Trenton, ON

  40,75–52,75 $/h

  

  L3Harris Technologies

  5+ ansCandidates need a Transport Canada AME-S licence, at least 5 years as a structure AME, and hands-on experience with structural repair manuals, sheet metal, sealants and composite repair. They must also be eligible for the Controlled Goods Program and Reliability status with a Level 2 (Secret) clearance.

  Microsoft Office, calibrated measuring equipment, test equipment, aircraft towing equipment, fueling equipment

  1 mois

  Aircraft Maintenance Engineer (AME) - M2 (Casual)

  Trenton, ON

  40,75–52,75 $/h

  

  L3Harris Technologies

  Candidates need a Transport Canada AME M2 licence and heavy aircraft experience across the engine/airframe interface, environmental control, electrical, hydraulic, fuel and flight control systems. They must be eligible for Controlled Goods registration, government Reliability status and Secret clearance, and ITAR requirements.

  Certified/calibrated standard measuring and test equipment

  1 mois

  Aircraft Maintenance Engineer - Avionics (E) (Casual)

  Trenton, ON

  40,75–52,75 $/h

  

  L3Harris Technologies

  Candidates need a Transport Canada AME licence with an appropriate rating and heavy aircraft experience in engine/airframe interface, environmental control, electrical, hydraulic, fuel and flight control systems. They must be eligible for Controlled Goods registration, a Government of Canada Reliability status and Secret Level 2/NATO Secret clearance, and ITAR requirements.

  calibrated standard measuring and test equipment

• 1 mois

  Senior Project Manager, Aircraft Program Development (ACP)

  Montréal, QC +1

  Sur placeTemps plein

  

  Dominion Dynamics

  10+ ansCandidates need 10+ years of progressing complex technical programs in aerospace or defence, with authority over scope, schedule and cost. An engineering degree and the ability to brief senior leaders and customer technical staff are required. A defence background is not required.

  MS Project, JIRA, Confluence, Smartsheet

  1 mois

  Autonomous Collaborative Platform (ACP) - General Interest

  Ottawa, ON +1

  Sur placeTemps plein

  

  Dominion Dynamics

  Candidates need aerospace, engineering or technical experience, ideally with aerospace standards, and a hands-on interest in building aircraft. No defence background is required, and early-career candidates are welcome.

  Paramedic, Electrical wiring diagrams, Procurement

• 1 mois

  AVIONICS ENGINEER (E) ACA - NORTH (1002)

  Dorval, QC

  45,96 $/h

  

  Air Inuit: Owned collectively by the Inuit of Nunavik through the Makivik Corporation, the airline operates a fleet of 30 aircraft and employs over 1,000…

  3+ ansCandidates need at least 3 years of avionics maintenance experience and a valid E licence, plus completion of the AMO qualifying exam. Strong troubleshooting, autonomy and a willingness to work in remote northern locations are required.

  Dash 8, Boeing 737, MPM, MCM, Maintenance Control forms

  1 mois

  AIRCRAFT MAINTENANCE ENGINEER (M) - ACA - NORTH (#1007)

  Dorval, QC

  45,96 $/h

  

  Air Inuit: Owned collectively by the Inuit of Nunavik through the Makivik Corporation, the airline operates a fleet of 30 aircraft and employs over 1,000…

  3+ ansCandidates need 3 years of aircraft maintenance experience, a valid M1 and M2 licence, and completion of the AMO certification exam. Strong knowledge of aviation safety regulations and maintenance manuals, plus the ability to work autonomously in remote, weather-exposed conditions, are required.

  ACA, Inspection, Undertake inspections, Regulatory compliance, Troubleshoot, Work independently

• 1 mois

  Aircraft Maintenance Engineer, ACA

  Edmonton, AB

  Temps plein

  C

  Courtney1

  Candidates need a valid Transport Canada AME M2 licence and experience or a type rating on B757, B767 or B777 aircraft. They must be able to lift 50 lbs, work at heights, and show strong problem-solving and communication skills.

  measuring instruments, test equipment, MS Word, MS Excel

  1 mois

  Aircraft Maintenance Engineer, ACA

  Hamilton, ON

  Temps plein

  C

  Courtney1

  Candidates need a valid Transport Canada AME M2 licence and experience or a type rating on B757, B767 or B777 aircraft. They must be able to lift 50 lbs, work at heights, and show strong problem-solving and communication skills.

  measuring instruments, test equipment, MS Word, MS Excel

  1 mois

  Aircraft Maintenance Engineer, ACA

  Hamilton, ON

  Temps plein

  C

  Courtney1

  Candidates need a valid Transport Canada AME M2 licence and experience or a type rating on B757, B767 or B777 aircraft. They must be able to lift 50 lbs, work at heights, and show strong problem-solving and communication skills.

  measuring instruments, test equipment, MS Word, MS Excel

  1 mois

  Aircraft Maintenance Engineer, ACA

  Vancouver, BC

  Temps plein

  C

  Courtney1

  Candidates need a valid Transport Canada AME M2 licence and experience or a type rating on B757, B767 or B777 aircraft. They must be able to lift 50 lbs, work at heights, and show strong problem-solving and communication skills.

  measuring instruments, test equipment, MS Word, MS Excel

• 1 mois

  Manager, NDT Accessory Shop

  North Bay, ON

  Temps plein

  

  Voyageur Aviation: Voyageur Aviation is a specialized aviation company who prides itself on delivering unique and innovative solutions.

  5+ ansCandidates need post-secondary technical education, CGSB Level 2 certification in ET, PT and MT, and at least 5 years of NDT or related technical experience. Strong leadership, reporting and customer relationship skills are also required.

  NDT equipment

• 1 mois

  Inspector - Aerospace components

  Montréal, QC

  30,73–53,21 $/h

  FA

  FTAI Aviation LLC

  3+ ansCandidates need a DEP, DEC or ASP in inspection, aerospace, machining, welding, sheet metal or structures, plus at least 3 years of aerospace component inspection. They must read technical drawings with GD&T, use high-precision measuring instruments, and know TC, FAA, EASA and AS9100 standards.

  CMM, micrometers, calipers, profilometers, bore gauges

• 1 mois

  Junior Avionics Engineer

  Dorval, QC

  Temps plein

  

  Top Aces (TAI): Top Aces provides advanced adversary air (ADAIR) and joint terminal attack controller (JTAC) technology and training to the world’s leading armed…

  Candidates need a bachelor's degree in electrical, computer or aerospace engineering or equivalent, plus knowledge of aircraft design rules, airworthiness and configuration management. They must be fluent in Microsoft Office and English, able to draw with AutoCAD, and eligible for Controlled Goods and Secret clearances.

  AutoCAD, SolidWorks, Microsoft Office, SharePoint

  1 mois

  Director of Data Management and Business Intelligence

  Dorval, QC

  Temps plein

  

  Top Aces (TAI): Top Aces provides advanced adversary air (ADAIR) and joint terminal attack controller (JTAC) technology and training to the world’s leading armed…

  10+ ansCandidates need enterprise data leadership experience, knowledge of data governance, architecture and BI platforms such as Microsoft Fabric, Azure and Power BI, and familiarity with aviation or MRO data. Compliance knowledge of ITAR, EAR and the Canadian Controlled Goods Program is needed, as is experience leading and developing teams.

  Ramco, Microsoft Fabric, Azure, Power BI

  1 mois

  Lead AI and Automation

  Dorval, QC

  Temps plein

  

  Top Aces (TAI): Top Aces provides advanced adversary air (ADAIR) and joint terminal attack controller (JTAC) technology and training to the world’s leading armed…

  8+ ansCandidates need experience leading AI, automation or digital transformation programs, with knowledge of enterprise architecture, data governance and security. Strong judgment on responsible AI, regulated environments and stakeholder change management is expected.

  Ramco MRO, ERP systems

  1 mois

  Technical Publications Author

  Dorval, QC

  Temps plein

  

  Top Aces (TAI): Top Aces provides advanced adversary air (ADAIR) and joint terminal attack controller (JTAC) technology and training to the world’s leading armed…

  Candidates need broad knowledge of technical manual structure, including ATA and WUC organization, IPB/IPC and aircraft maintenance manuals, plus aircraft configuration management and airworthiness concepts. Strong Microsoft Office and document production skills, attention to detail, and fluent English are required; French or German is an asset.

  Microsoft Word, Microsoft Office, Adobe, SharePoint

9 entreprises