Emplois “Design metal components” au Canada – Page 10

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 25j

  Steel Fabricator

  Abbotsford, BC

  35–42,50 $/hTemps plein, Contrat

  

  Express Employment Professionals: The Express franchise brand is an industry-leading, international staffing company with franchise locations across the U.S., Canada, South Africa,…

  2+ ansCandidates need a documented Red Seal Fabricator certification and at least two years of steel fabrication experience. They must be able to read shop drawings, do trigonometry-based layout calculations, lift up to 50 lbs, and work safely as part of a team.

  Overhead crane, Press brake, Plasma torch, Cutting torch, Welding machine, Drill

  25j

  General Labour (AS268)

  Ontario

  19 $/hTemps plein, Contrat

  

  Express Employment Professionals: The Express franchise brand is an industry-leading, international staffing company with franchise locations across the U.S., Canada, South Africa,…

  Candidates need experience in manufacturing, production or general labour preferred, along with hand and power tool use and accurate measuring. They must be able to lift and carry materials safely, pay close attention to detail and be reliable and punctual.

  Power tools, Hand tools, Measuring tools, Pump truck

• 25j

  Senior Mechanical Engineering Consultant

  Kanata, ON

  Contrat

  

  Myticas Consulting

  Candidates need senior mechanical engineering experience with enclosure, PCB mechanical integration and tolerance analysis, able to work onsite under a client engineering team.

  Mechanical engineering, Printed circuit boards, Assembly, Monte Carlo simulation, Provide technical documentation, Documentation

• 25j

  Aircraft Sheet Metal Technician

  Windsor, ON

  GA

  GAL AeroStaff

  5+ ansCandidates need a technical college degree in aerospace or equivalent and at least 5 years of MRO experience. They must read, write and speak English at a B2 level, lift up to 50 pounds, and bring their own tools.

  Saws, Shears, Grinders, Jigs, Fixtures, Measuring instruments

• 25j

  Application Specialist

  Edmonton, AB

  HybrideTemps plein

  AI

  Applied Industrial Technologies LP

  Candidates need strong mechanical aptitude, preferably a P.Eng or CET, and deep knowledge of bearings, power transmission and bulk material handling products. They must be skilled in AutoCAD or 3D drafting, precision measurement, and mechanical calculations, and understand industrial markets in Western Canada.

  AutoCAD, 3D drafting software, micrometers, vernier calipers, hardness tester

  25j

  Application Specialist

  Edmonton, AB

  Temps plein

  AI

  Applied Industrial Technologies LP

  Candidates need strong mechanical aptitude, preferably a P.Eng or CET, and deep knowledge of bearings, power transmission and bulk material handling products. They must be skilled in AutoCAD or 3D drafting, precision measurement, and mechanical calculations, and understand industrial markets in Western Canada.

  AutoCAD, 3D drafting software, micrometers, vernier calipers, hardness tester

• 25j

  Machine Operator (Weekend Shift)

  Barrie, ON

  21,50–23 $/h

  ME

  MACLEAN ENGINEERING & MARKETING CO. LIMITED

  Candidates need prior experience working safely in a manufacturing environment and operating equipment. Experience with a band saw or plasma burn table is an asset, laser table experience is preferred, and forklift and overhead crane certification is an asset.

  band saw, burn table, manual brake press, laser table, overhead crane, gantry crane

• 25j

  Senior Mechanical Designer

  Vancouver, BC

  Temps plein

  

  Avigilon Corporation

  3+ ansCandidates need a bachelor's degree and at least 3 years of mechanical engineering experience. Proficiency in CREO or SolidWorks, injection molding, die casting, sheet metal and machining design, and FEM analysis is needed.

  CREO, SolidWorks, CAE tools

• 25j

  Senior Mechanical Designer

  Montréal, QC

  TélétravailTemps plein

  

  SYSTRA: With its 11,000 employees, the Group's mission is to connect people and bring territories closer together in the 80 countries where it operates.

  10+ ansCandidates need a college diploma in mechanical design or an engineering bachelor's degree, 10 to 15 years of metal fabrication and mechanical design experience, and strong SolidWorks skills. Fluency in French and English is required.

  SolidWorks, SolidWorks PDM, DraftSight, Inventor

  25j

  Mechanical Designer - 12 months contract

  Montréal, QC

  TélétravailContrat

  

  SYSTRA: With its 11,000 employees, the Group's mission is to connect people and bring territories closer together in the 80 countries where it operates.

  5+ ansCandidates need a DEC in mechanical design or an engineering bachelor's degree, 5 to 10 years of metal fabrication and mechanical design experience, and strong SolidWorks skills. Fluent French and English are required.

  SolidWorks, SolidWorks PDM, DraftSight

• 26j

  Project Director (Minerals & Metals)

  Vancouver, BC +1

  227k–280k $/anHybrideTemps plein

  W

  Wood

  15+ ans15+ gestionCandidates need an engineering degree, at least 15 years of mining project management and construction execution experience, and experience with greenfield or large brownfield projects. Strong leadership and communication skills and willingness to travel are required.

  Recruitment, Leadership, Precious metals, Supply chain management, Risk management, Team building

• 26j

  Metal Fabrication Laborer

  Wetaskiwin, AB

  Sur placeTemps plein

  SI

  Supreme International

  Candidates need basic mechanical aptitude and comfort with hand and power tools, plus the ability to read English instructions and basic measurements. Metal fabrication or similar labour experience is preferred but not required, and the role demands physical stamina, attention to detail and legal authorization to work in Canada.

  saw, drill, grinder, shear, tape measure, square

• 26j

  CAD Technician – 3D Modelling & Project Migration (Part-Time / Contract)

  Richmond Hill, ON

  32 $/h

  

  Amico

  2+ ansCandidates need a diploma or degree in architectural technology, mechanical engineering technology, drafting, or a related field, plus at least 2 years of professional AutoCAD drafting experience. Strong 3D CAD and technical drawing skills and the ability to work independently are essential.

  AutoCAD, Onshape, Microvellum

• 26j

  Junior / Intermediate Noise and Vibration Practitioner/Engineer

  Mississauga, ON

  H

  Hatch

  3+ ansCandidates need a mechanical engineering or environmental science degree, at least 3 years of mechanical noise and vibration work, and strong calculation, programming and English report-writing skills. Experience with noise compliance under MECP, MTO, CEAA and IFC guidelines is an asset.

  CADNA-A, SoundPlan, EASE, MATLAB, Excel, MathCAD

• 26j

  Test Technician

  Canada

  Temps plein

  VI

  Vaderstad Industries Inc (VII)

  Candidates need an engineering technician diploma in a mechanical, agricultural, electrical or related field, and are eligible for SASTT registration as an asset. Hands-on mechanical skill, troubleshooting ability and CAD experience such as Autodesk Inventor are strong assets.

  Autodesk Inventor, Microsoft Office, hand tools, large machinery

• 26j

  Integrator - Structural Engineering

  Quebec

  Temps plein

  YG

  YDTS Global

  10+ ansCandidates need a bachelor's degree in mechanical or aerospace engineering or a related technical field, plus at least 10 years of aerospace experience. They need strong knowledge of primary aircraft structures and systems installation, and fluent English.

  CATIA V5, Enovia, MS Office, NX, Teamcenter

• 26j

  Mining Engineer, 5-10 years

  Greater Sudbury, ON +1

  B

  BBA

  5+ ansCandidates need an underground mining background, experience with mine studies and design, and the ability to write study reports and present to clients professionally. Experience with mining consulting and client relationships is an asset.

  Mining engineering, Schedule production

• 26j

  Air Cushion Vehicle (ACV) Engineer

  Richmond, BC

  ND

  National Defence - Canadian Coast Guard

  Candidates need a secondary school diploma or an approved equivalent, plus a Transport Canada ACV Engineering licence (Class 1 or 2) or a marine engineering or aircraft maintenance certificate. They must also hold Reliability Status clearance and be willing to work shifts, overtime and travel.

  Inspection, Regulatory compliance, Mechanical systems, Welding

• 26j

  Building Services Technician

  Drumheller, AB +4

  CS

  Correctional Service Canada

  Candidates need a secondary school diploma and a completed building systems, HVAC or refrigeration technician certificate or apprenticeship. They also need hands-on experience maintaining commercial or institutional building systems, a valid driver's licence, English and reliability clearance.

  HVAC equipment, boilers, compressors, test equipment, Microsoft Word, Microsoft Excel

• 26j

  Journeyperson Pipefitter

  Quesnel, BC

  Temps plein

  

  West Fraser: West Fraser is a diversified wood products company with facilities in Canada, the U.S., the U.K.

  Candidates need a Red Seal Pipefitter certification, a Class 5 driver's licence and heavy industry experience. They must work safely, communicate well and work independently with little supervision.

  Cutting torch, Pipe cutter, Pipe cutting machine, Threading machine, Pipe bending tools, Hammer and chisel

• 26j

  Quality Engineer

  Mississauga, ON

  TW

  The Wohl Group - Recruitment Made Easy!

  3+ ansCandidates need 3 to 5 years of aerospace or automotive quality experience, knowledge of AS 9100 Rev D, and GD&T drawing skills. A mechanical or aeronautical engineering bachelor's degree is required, and a CQE or CQA certification is an asset.

  MS Excel, MS Word, MS Outlook, MS PowerPoint, MS Visio, MS Access

  26j

  CNC Programmer

  Concord, ON

  20–40 $/h

  TW

  The Wohl Group - Recruitment Made Easy!

  10+ ansCandidates need 10 years of precision machining experience, expert Mastercam and 5-axis milling and lathe programming skills, and intermediate CAD and fixture design ability. An engineering technologist background in numerical control and GD&T knowledge are also required.

  Mastercam, Vericut, SolidEdge, SolidWorks, AutoCAD, MS Excel

  26j

  Additive Manufacturing Technician

  Markham, ON

  50k–65k $/an

  TW

  The Wohl Group - Recruitment Made Easy!

  1+ ansCandidates need a diploma or certificate in a manufacturing, materials, mechanical or metallurgy technology program, or equivalent hands-on experience. They should have 1 to 2 years operating metal additive manufacturing systems, preferably LPBF, and knowledge of reactive metal powders.

  LPBF system, CMM, calipers

• 26j

  Structure Design Engineer

  Canada

  

  Infosys

  5+ ansCandidates need a bachelor's degree or equivalent in aerospace or mechanical engineering, 5 to 10 years of hands-on aerospace structural design experience, and proven work on Airbus aircraft programs. Knowledge of Airbus processes, airworthiness requirements and CATIA v5 is also expected.

  CATIA v5, Datalink, ICMS, eRoom, ERD, BNet

19 entreprises