Emplois “welding fixtures” au Canada – Page 10

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Toolmaker

  East Gwillimbury, ON

  Temps plein

  

  Multimatic Dynamic Suspensions

  5+ ansCandidates need a completed provincial tool and die apprenticeship and five years as a registered tool and die maker. Strong automotive press department knowledge, nitrogen and pneumatics experience, good problem solving, and self-starter skills are also required.

  MVP, Press equipment, Welding equipment

  1 mois

  Production Operator

  East Gwillimbury, ON

  Temps plein

  

  Multimatic Dynamic Suspensions

  Candidates need to follow written and verbal instructions, work well in a team, and pay close attention to detail. Manufacturing experience is preferred but not essential, and mechanical aptitude is an asset.

  drilling machine, riveting equipment, welding equipment, gauges, measuring equipment, fixtures

  1 mois

  Production Operator

  East Gwillimbury, ON

  Temps plein

  

  Multimatic Dynamic Suspensions

  Candidates need to follow written and verbal instructions, work well in a team, and be detail oriented. Manufacturing experience is preferred but not essential, and mechanical aptitude is an asset.

  riveting equipment, welding equipment, checking fixtures, measuring and gauging equipment, inventory system

  1 mois

  Quality Co-op

  East Gwillimbury, ON

  Temps plein

  

  Multimatic Dynamic Suspensions

  Candidates need to be enrolled in an engineering program and be detail oriented and self-motivated. They should be proficient in Microsoft Office, communicate well in writing and speaking, and hold a valid driver's licence.

  Microsoft Office, stamping fixtures, weld fixtures

• 1 mois

  Sr Machinist

  North Bay, ON

  37,04–49,63 $/hSur placeTemps plein

  CM

  CAN MOT|20900 Motion Canada Inc.

  5+ ansCandidates need five or more years of shop experience, a high school diploma or equivalent, and knowledge of metals, measurement and CAD/CAM software. Advanced knee mill and WEDM experience and proficient MIG/TIG welding on aluminum and stainless steel are also required.

  Lathe, Milling machine, Grinder, Acer knee mill, WEDM, Micrometer

• 1 mois

  Welder Apprentice 1st (Rotating Days)

  Nisku, AB

  Temps plein

  SL

  Silent-Aire Limited Partnership

  Candidates need registration as an Apprentice Welder in Alberta and enrolment in a recognized trade school, plus valid GMAW and SMAW certification in all positions. They must be able to lift up to 35 lbs, work under pressure, and communicate clearly.

  MIG welder, TIG welder, press brake, shears, flame-cutting equipment, jigs and fixtures

  1 mois

  Journeyman Welder - Day and Night Shift

  Nisku, AB +1

  Temps plein

  SL

  Silent-Aire Limited Partnership

  Candidates need a Journeyman Welder licence in Alberta, welding certifications including GMAW and SMAW in all positions, and experience with routine maintenance. Strong attention to detail, flexibility, good communication and the ability to work well under pressure are also required.

  MIG welder, TIG welder, Brake press, Shears, Jigs and fixtures

  1 mois

  Welder (2nd year, 3rd year, 4th year, Journeyperson)

  Nisku, AB

  Temps plein

  SL

  Silent-Aire Limited Partnership

  Candidates need a valid welding certification in GMAW and SMAW, certified in all positions, plus a Red Seal or AIT electrical certification with 500+ hours in the blue book. Reliable transportation to the Nisku site and the ability to lift 50 lb are also required.

  MIG welder, TIG welder, ARC welder, Brake, Shear, Flame-cutting equipment

• 1 mois

  Welder Apprentice 3rd

  Nisku, AB +1

  Temps plein

  ?

  In 2021, Silent-Aire became part of Johnson Controls, further enhancing the ability to deliver cutting-edge solutions worldwide; Perform flame‑cutting and thermal cutting operations using manual or semi‑automatic…

  Welding, Journeyperson, Technical drawings, Process improvement, Design metal components, Inspection

• 1 mois

  Advanced Manufacturing Engineer

  Brampton, ON

  Temps plein

  

  Magna International Inc.

  3+ ansCandidates need 3+ years in a manufacturing or industrial setting, ideally with automotive shopfloor experience and post-secondary education. Strong knowledge of GD&T, welding and joining processes, and fixture design is required, along with communication skills and the ability to work independently.

  AutoCAD, CATIA, NX, SolidWorks, Visual Components, Process Simulate

  1 mois

  Pipefitter Steamfitter

  Brampton, ON

  Temps plein

  

  Magna International Inc.

  5+ ansCandidates need at least 5 years of automotive assembly or tooling experience. They must read blueprints and schematics, use hand and machine tools, and bring their own tools.

  Parker 801 hose, Hand benders, Power threaders, Lathe, Milling machine, Drill press

  1 mois

  Toolmaker /Dimensional Finisher

  Brampton, ON

  Temps plein

  

  Magna International Inc.

  5+ ansCandidates need a Tool and Die Maker Certificate of Qualification or equivalent and at least five years of automotive assembly or tooling experience. They must read blueprints and GD&T specifications, document panel changes clearly, and work safely with lockout procedures.

  CMM, Hand tools, Welding equipment, Hemming equipment

  1 mois

  Toolmaker

  Brampton, ON

  35–42 $/hTemps plein

  

  Magna International Inc.

  5+ ansCandidates need a Certificate of Qualification as a Tool and Die Maker or equivalent and at least 5 years of automotive tooling or assembly experience. Strong machining, blueprint-reading and communication skills are needed, and candidates must bring their own tools.

  Lathe, Milling machine, Surface grinder, Blueprints, Hand tools, Welding equipment

• 1 mois

  Electrician/PLC Programmer (Nights)

  Vaughan, ON

  38–40 $/hTemps plein

  

  Magna Exteriors Inc.

  5+ ansCandidates need an industrial electrician and/or PLC certification, at least 5 years of hands-on manufacturing experience, and PLC programming skills. Robot programming for ABB, Fanuc or Panasonic and MIG, stick and TIG welding are also required, along with the ability to lift 50 lbs.

  PLC, robots, LabVIEW, presses, forklift, overhead crane

  1 mois

  Robotics Technician (Afternoons)

  Vaughan, ON

  34–38 $/hTemps plein

  

  Magna Exteriors Inc.

  Candidates need post-secondary education in robotics or automation, MIG, stick and TIG welding experience, and PLC programming and troubleshooting with Allen-Bradley and Studio 5000. Robot programming certification for ABB, Fanuc or Panasonic, vision system experience, and the ability to lift 50 lbs are also required.

  Studio 5000, Keyence vision systems, Medar, Computerized maintenance system

• 1 mois

  Technician, Structures and Materials

  Waterloo, ON

  Temps plein

  

  University of Waterloo: In a complex and rapidly evolving world, WatSPEED at the University of Waterloo is professional education that’s designed to be different.

  Candidates need a diploma, apprenticeship or equivalent experience in civil, mechanical, manufacturing or a related technical field. Several years of hands-on lab or fabrication experience, a valid G driver's licence and strong computer skills are required.

  servo-hydraulic systems, data acquisition systems, hand tools, power tools, welding equipment, machine shop equipment

• 1 mois

  Industrial Millwright Mechanic

  London, ON

  Temps plein

  DC

  Diversey Canada Inc

  5+ ansCandidates need a licensed Millwright credential with post-secondary or apprenticeship training and 5-7 years of manufacturing maintenance experience. Solenis expects strong hydraulics, pneumatics, logic controls, machining and welding skills, and the ability to train others.

  Shop and hand tools, Welding equipment, Machining equipment, MS Office

  1 mois

  Industrial Millwright

  London, ON

  Temps plein

  DC

  Diversey Canada Inc

  5+ ansCandidates need a valid Industrial Millwright certification and 5 to 7 years of industrial maintenance experience in manufacturing. Solenis also expects skills in hydraulics, pneumatics, industrial controls, welding, machining and reading mechanical drawings.

  hand tools, welding equipment, machining equipment, Microsoft Office

• 1 mois

  Industrial Plumber- 306A

  Brantford, ON

  Temps plein

  ?

  3+ ansAttend outside training courses as required in order to maintain or enhance technical skills; Provide direction and training where required to production personnel to assist operators in the proper use of pumps and…

  Plumber licence, Maintenance and repair, Plumbing, Welding, Preventive maintenance, Provide information

• 1 mois

  Certified Millwright/Industrial Mechanic Millwright

  Port Maitland, ON

  46,03 $/hSur place

  

  Innophos

  Candidates need a valid Industrial Mechanic Millwright Certificate of Qualification (433A). Welding experience with stainless steel and steel is preferred, along with food or chemical manufacturing experience and the ability to lift heavy objects.

  welding equipment, pipe bending equipment, pipe threading equipment, hand tools, burning equipment

• 1 mois

  Manufacturing Technician (CNC Machining & Fabrication)

  Ottawa, ON

  55k–70k $/an

  

  Spaceium

  Spaceium needs hands-on experience with CNC machining or welding, soldering or cable assembly, and reading engineering drawings. Precision measuring skills and strong attention to detail are required. Certifications and a trade or college credential are assets.

  CNC mill, CNC lathe, Drill press, Calipers, Micrometers, Gauges

10 entreprises