Emplois “Drawing packages” au Canada – Page 11

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 2h

  Aircraft Technical Project Manager

  Breslau, ON

  Temps plein

  DH

  De Havilland Aircraft of Canada Limited

  10+ ansCandidates need a current AME "E" Transport Canada licence, at least 10 years of technical experience, and experience leading teams. They should have broad troubleshooting skills on electrical, navigation, communication and flight control systems; experience on DHC-8 or CL-415/215 aircraft is an asset.

  Project data tracking tools

• 2h

  Assembly Technician

  London, ON

  Temps plein

  AB

  Amphenol Borisch Technologies

  Candidates need Canadian citizenship and electronics experience or a college diploma, with hand-tool and soldering skills. IPC-A-610, IPC-WHMA-620 or J-STD-001 certification, blueprint reading, problem-solving, attention to detail and basic Microsoft Office skills are preferred.

  Soldering iron, Hand tools, Microsoft Office

• 2h

  Apply Estimator/ Project Coordinator

  Saskatoon, SK

  Temps plein

  DL

  DynaIndustrial LP

  Candidates need mechanical aptitude and industrial manufacturing knowledge, ideally from welding, fabrication, machining or equipment repair. They must read blueprints and welding symbols, and have strong computer, communication and organizational skills.

  ERP system

  2h

  Apply Design Engineer

  Saskatoon, SK

  Temps plein

  DL

  DynaIndustrial LP

  5+ ansCandidates need a Mechanical Engineering or Mechanical Engineering Technology degree and 5+ years of engineering design experience. Strong skills in Autodesk Inventor and AutoCAD, manufacturing drawings and mechanical design are required.

  Autodesk Inventor, AutoCAD, FEA software, Stress analysis software, Project management tools

• 2h

  Intermediate/Senior Electrical Engineer (Grande Prairie)

  Grande Prairie, AB

  Temps plein

  TS

  Tetranex Solutions Inc.

  5+ ansCandidates need an electrical engineering degree, about 5-15 years of EPC experience and a P.Eng. with APEGA. Experience with industrial electrical systems, ETAP, SKM Power Tools, Microsoft Word and Excel, and willingness to travel to job sites are also required.

  ETAP, SKM Power Tools, Microsoft Word, Microsoft Excel

• 2h

  Senior Mechanical Designer

  Mississauga, ON

  Temps plein

  T

  Tenova

  5+ ansCandidates need a diploma or degree in mechanical engineering or design and at least 5 years of mechanical design or drafting experience. Advanced AutoCAD and Autodesk Inventor skills and experience with industrial equipment and fabrication drawings are required.

  AutoCAD, Autodesk Inventor, SolidWorks, Autodesk Vault, PRO.FILE, Microsoft Office

• 2h

  1st/2nd Year Apprentice Pipefitter

  Conklin, AB

  Temps plein

  SG

  Strike Group

  Strike Group needs a registered 1st or 2nd year apprentice with the provincial or federal authority. Candidates must hold or be willing to obtain H2S Alive and CSTS 2020 or PST tickets, pass drug and alcohol testing, lift 50 pounds and work outdoors.

  Hoisting and rigging equipment

• 2h

  Mine Engineer in Training

  Kamloops, BC

  Temps plein

  NG

  New Gold Inc.

  1+ ansCandidates need a bachelor's degree in mining engineering and eligibility to register as an EIT with EGBC. One year of underground mining experience is an asset, as are Microsoft Office skills and experience with Deswik, Surpac or PCBC.

  Deswik, Surpac, PCBC, VentSim, Microsoft Office

• 2h

  Millwright 433A

  Etobicoke, ON

  Temps plein

  

  Wonderbrands

  Candidates need a valid Millwright 433A or equivalent trade qualification, plus hands-on experience with power and hand tools and mechanical troubleshooting. Experience in manufacturing or food production, reading technical drawings and a commitment to safe work are expected.

  Power tools, Hand tools

• 2h

  DRAFTSPERSON - RESIDENTIAL M/F/D

  Laval, QC

  Temps plein

  F

  F/LIST

  Candidates need a technical education, senior draftsperson experience and woodworking or carpentry background, such as a master craftsman's examination. AutoCAD knowledge, Excel skills and fluency in English and French are required.

  AutoCAD, WoodWop CNC, MS Excel

• 2h

  System Proposal Engineer

  New Brunswick

  Temps plein

  Y

  Yokogawa

  1+ ansCandidates need upper secondary education and about 13 months to 3 years of experience working independently. The role also requires strong written and verbal communication, computer skills and some numerical ability.

  MS Excel, databases

• 2h

  Project Manager

  St. Catharines, ON

  Temps plein

  C

  Canal

  5+ ansCandidates need a bachelor's degree in engineering or business, or a post-secondary diploma plus industry experience, and five years of project management experience. Two years in marine, construction or industrial settings and EPC project experience are needed, along with strong communication skills and proficiency in Excel and scheduling software.

  MS Excel, MS 365, MS Project, Primavera P6, ERP

• 2h

  Sub-Agent (Renewables)

  Vanguard, SK

  Temps plein

  A

  Aureos

  Candidates need construction project delivery experience, knowledge of programme management, lean construction tools and quality or environmental compliance.

  Supply chain management, Stakeholder management, Root cause analysis

• 2h

  VDC Coordinator

  York, ON

  Temps plein

  M

  Multiplex

  2+ ansMultiplex needs candidates with a bachelor's degree in engineering, construction management, architecture or building construction, plus at least 2 years in construction. Strong skills in Revit, Navisworks and AutoCAD are required, and Fuzor is an asset.

  Autodesk Revit, Navisworks, AutoCAD, Fuzor

• 2h

  4th Year or above 306A Plumbing Apprentice

  Kitchener, ON

  Temps plein

  MF

  Merit for Training

  3+ ansCandidates need to be a licensed plumber or 4th year apprentice, with Red Seal preferred and 3 to 5 years of plumbing experience, ideally on new construction. They also need to read blueprints, troubleshoot well, work with other trades, and hold a valid Ontario G-class driver's licence.

  plumbing tools, pressure test equipment

• 2h

  4th Year or above 306A Plumbing Apprentice

  Kitchener, ON

  Temps plein

  MF

  Merit for Apprenticeship

  3+ ansCandidates need to be a licensed plumber or 4th year apprentice with several years of plumbing experience, able to read blueprints, troubleshoot problems and know Ontario Plumbing Code. A valid Ontario G licence with a clean driving record is required.

  plumbing tools, pressure test equipment

• 2h

  Crew Bus Driver

  Port Coquitlam, BC

  Temps plein

  C

  CPKC

  Candidates need a grade 12 education, keyboarding and Excel skills, and a valid driver's licence. They must also pass a medical, drug test and background checks, and complete a training program to qualify for a safety-sensitive position.

  Webmail, Common Yards, TYES, Excel

• 2h

  Mine Technician

  Timmins, ON

  Temps plein

  LS

  Lake Shore Gold

  2+ ansLake Shore Gold needs candidates with a two-year mine technician or three-year mine technologist college diploma and at least two years of underground ventilation, surveying or similar experience. Working knowledge of Microsoft Office, survey and borehole monitoring equipment, and strong safety compliance are required; Deswik and OACETT accreditation are assets.

  Deswik, Microsoft Excel, Microsoft Word, Microsoft Project, Microsoft PowerPoint, survey equipment

• 2h

  Account Manager

  Mississauga, ON

  Temps plein

  PP

  Preston Phipps Inc

  2+ ansPreston Phipps needs candidates with 2 to 4 years of technical sales, engineering or field experience and a Bachelor's degree in Mechanical or Chemical Engineering or equivalent. A valid driver's licence and clean driving record are required, with strong communication, organization and technical curiosity.

  Sales, Mechanical systems, Research, Process improvement, Workflow, Chemical engineering

• 2h

  Electrical & Instrumentation (E&I) Designer

  St. John's, NL

  Temps plein

  AS

  Aker Solutions

  5+ ansCandidates need a technical college diploma or equivalent experience, 5 to 10 years of engineering design experience ideally in brownfield industrial settings, and experience with 2D and 3D design programs. Knowledge of instrumentation design codes, standards and applicable regulatory codes is required.

  3D design programs

• 2h

  Civil Construction Estimator (Junior/Intermediate) - Rossland, BC

  Rossland, BC

  Temps plein

  N

  Norland

  2+ ansCandidates need a diploma or degree in civil engineering, civil engineering technology, construction management or a related field, plus preferably 2 to 5 years of estimating or construction experience. They must read construction drawings, be strong in Microsoft Excel and hold a valid Class 5 driver's licence.

  Microsoft Excel, Microsoft Office, Estimating software

• 2h

  Quality Control Specialist

  Woodstock, ON

  Temps plein

  P

  PreCon

  Candidates need a civil or engineering diploma or related field, experience with pre-stressed precast, complex forming or CWB welding, and quality inspection in precast concrete. They must read complex structural drawings and use AutoCAD and 3D modelling tools, with Tekla an asset and ACI or PCI certification an asset.

  Tekla, 3D modelling software

• 4h

  Electrical Engineer (Controls and Infrastructure)

  Richmond, BC

  100k–140k $/anHybrideTemps plein

  GF

  General Fusion Inc.

  5+ ansCandidates need a bachelor's degree in electrical engineering, P.Eng. registration or eligibility with EGBC, and 5+ years of hands-on experience taking control panels from schematic to commissioning. Strong PLC programming skills in IEC 61131-3 and knowledge of the Canadian Electrical Code are also required.

  Beckhoff TwinCAT, multimeter, insulation resistance tester, oscilloscope, AutoCAD Electrical, EPLAN

  4h

  Mechanical Engineer

  Richmond, BC

  95k–115k $/anHybrideTemps plein

  GF

  General Fusion Inc.

  5+ ansGeneral Fusion needs candidates with a mechanical engineering or engineering physics degree and at least 5 years of post-graduate mechanical design experience. Candidates need hands-on skills, GD&T and materials knowledge, and comfort with changing requirements and tight deadlines.

  SolidWorks, SolidWorks PDM

22 entreprises