Emplois “aviation power tools” au Canada – Page 11

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Manufacturing & System Configuration Engineer

  Montréal, QC

  FA

  FTAI Aviation LLC

  5+ ansCandidates need an engineering degree and 5+ years in manufacturing engineering or configuration roles in a regulated environment. Experience with ERP/MRP/PLM systems, BOM and work order setup, and engine or complex assembly is required, along with strong communication skills and intermediate English.

  SAP, Dynamics NAV, ERP, MRP, PLM

  1 mois

  Test Cell Engineer

  Montréal, QC

  FA

  FTAI Aviation LLC

  3+ ansCandidates need a bachelor's degree in mechanical, electrical or instrumentation engineering, or relevant technical experience, plus at least 3 years supporting test cells. They also need hands-on skill with instrumentation, controls and power distribution, and fluent English and French.

  SolidWorks, ladder logic, P&ID

• 1 mois

  Senior Sustainability Consultant

  Ottawa, ON

  Sur placeTemps plein

  

  Stantec

  7+ ansCandidates need 7+ years in consulting engineering or sustainability, a mechanical engineering degree (P.Eng eligible or registered), and strong knowledge of HVAC, heat pumps and building codes. Strong technical writing and cross-disciplinary communication are also required.

  IES

• 1 mois

  Part Time T56 Engine Mechanic (Comox, BC) - Temporary

  Winnipeg, MB

  Temps partiel

  

  StandardAero

  Candidates need previous aircraft mechanic experience in an aerospace setting and T56 turboprop engine experience. Lifting up to 50 pounds and standing for long periods are required, and a licence or aviation training such as AME, CAMC, A&P or AMT is desirable.

  hand tools, power tools, precision measuring equipment, production management computer system

  1 mois

  Machinists - All Experience Levels

  Winnipeg, MB

  Temps plein

  

  StandardAero

  Candidates need a high school diploma, machining training or related experience, and the ability to read blueprints and use precision measuring tools. Mechanical aptitude, attention to detail, basic shop math, and the ability to lift 50 pounds and stand for long periods are needed.

  calipers, micrometers, gauges

  1 mois

  Engineering Intern (Winter or Summer 2027)

  Winnipeg, MB

  Temps plein

  

  StandardAero

  Candidates need completed first-year engineering studies, a basic understanding of mechanical engineering principles, and strong communication and project management skills. Working knowledge of computers and MS Office is required, and candidates must be eligible to work in Canada permanently.

  MS Office, Excel

  1 mois

  Manual Machinist (SACS)

  Winnipeg, MB

  Temps plein

  

  StandardAero

  5+ ansCandidates need at least Level 3 machining from an apprenticeship or equivalent training, plus 5 or more years of manual machining experience. They must read blueprints well, use precision measuring tools, solve problems mathematically, lift up to 50 pounds and stand for long periods.

  lathe, calipers, micrometers, gauges, hand tools

  1 mois

  Manual Machinist

  Winnipeg, MB

  Temps plein

  

  StandardAero

  2+ ansCandidates need at least two years of hands-on manual machining experience, strong mechanical aptitude and precision, and skill reading blueprints and using measuring tools. They must be able to lift 50 pounds and stand for long periods.

  calipers, micrometers, gauges, conventional machines, hand tools

  1 mois

  Inspector, NDT I

  Winnipeg, MB

  Temps plein

  

  StandardAero

  Candidates need an associate's or bachelor's degree in quality, aerospace or a similar discipline, or equivalent training and experience, plus the ability to pass magnetic particle and penetrant exams with at least 80 percent average. They must be certifiable to NAS 410, able to commit to day training and evening shifts, and authorized to work in Canada permanently.

  Fluorescent penetrant equipment, Magnetic particle equipment, Eddy current equipment, X-ray equipment

  1 mois

  CNC Machinist

  Winnipeg, MB

  Temps plein

  

  StandardAero

  2+ ansCandidates need 2+ years of CNC experience or a machinist apprenticeship, plus permanent full-time work authorization in Canada. Strong blueprint reading, precision measuring skills and the ability to lift 50 pounds are required.

  calipers, micrometers, gauges, hand tools, production management computer systems

• 1 mois

  Electrical Engineer - Aviation

  Ontario +1

  Temps plein

  W

  WSP

  4+ ansCandidates need a bachelor's degree in electrical engineering, a P.Eng. or eligibility for registration in Ontario, and 4 to 7 years of electrical design and construction experience. Airfield or large infrastructure experience, knowledge of aviation standards, and design tool skills are required.

  AutoCAD, MicroStation, Revit

• 1 mois

  Electrical Engineer – Team Lead, MEP

  Toronto, ON

  140k–160k $/anHybrideTemps plein

  

  Egis Group: Egis is a leading global architectural, consulting, construction engineering, operations and mobility services firm.

  10+ ansCandidates need a bachelor's degree in electrical engineering, a P.Eng. or eligibility for registration in Canada, and at least 10 years of electrical engineering experience with 5 in Canadian consulting. Strong leadership, mentoring and knowledge of the Canadian Electrical Code are also required.

  Revit MEP, AutoCAD, ETAP, AGi32, ElumTools

• 1 mois

  Space Systems Engineer

  Waterloo, ON

  Sur placeTemps plein

  C

  CSMC

  2+ ansCandidates need a bachelor's degree in an engineering field and at least 2 to 5 years working directly on space systems, not aircraft. They must be eligible for Government of Canada security clearance and meet controlled goods and export rules.

  STK, GMAT, Cameo, SysML

• 1 mois

  Electronics Engineering Research Specialist

  Edmonton, AB

  Sur placeTemps plein

  

  Pegasus Imagery: Pegasus is an aerospace company developing advanced technologies to unlock the full potential of intelligent, connected flight.

  2+ ansCandidates need a Ph.D. in electrical or electronics engineering, physics or a similar field, completed within the past five years. They also need 2 to 5 years of hardware design experience, hands-on microwave lab testing skills, and experience with Altium Designer or KiCad.

  Altium Designer, KiCad, Microwave test equipment

• 1 mois

  Production Technician

  Surrey, BC

  Sur placeTemps plein

  

  International Water Guard: International Water-Guard is the world's leading provider of flight-certified potable water treatment units, on-demand water heaters, aircraft water…

  2+ ansCandidates need two to three years of related work experience or an equivalent mix of education and experience. Strong manual dexterity, mechanical aptitude, the ability to read technical documents, and basic computer skills are required.

  Hand tools, Power tools, Fixtures, Soldering equipment, Production equipment

• 1 mois

  SKYWISE - Technical Lead

  Waterloo, ON

  Temps plein

  SC

  Skywise Canada Inc.

  7+ ansCandidates need at least 7 years of professional C++ and complex algorithm development, proven technical leadership, and production debugging experience. A college diploma or bachelor's degree in software engineering or equivalent experience is required, and English proficiency is needed.

  C++, SQL, AWS

  1 mois

  Skywise - Senior Developer

  Waterloo, ON

  Temps plein

  SC

  Skywise Canada Inc.

  7+ ansCandidates need 7+ years of professional .NET and C# experience, strong SQL and performance-tuning skills, and experience debugging live production systems. A college diploma or bachelor's degree in software engineering or equivalent experience, and English proficiency, are required. AWS experience is an asset.

  C#, .NET Framework, .NET Core, SQL, AWS

• 1 mois

  Spécialiste engagement et adoption - Transformation de l’entreprise / Engagement & Adoption Specialist - Company Transformation

  Montréal, QC

  Temps plein

  AC

  Airbus Canada Limited Partnership

  5+ ans5 à 10 ans d'expérience sur un rôle similaire; Formation en gestion du changement, RH, communication ou marketing; Maîtrise des méthodologies de gestion du changement

  Suite Google

• 1 mois

  Superviseur - Ligne de moteur (2e quart) / Team Leader - Engine Lines (2nd shift)

  Lachine, QC

  Temps plein

  

  Rolls-Royce

  5+ ans5+ gestion5 ans d'expérience en gestion d'équipe; Expérience en milieu syndiqué; Maîtrise du français et de l'anglais

  ERP

  1 mois

  Ingénieur Manufacturier - Réparation de composants / Manufacturing Engineer - Component Repair

  Montréal, QC

  Temps plein

  

  Rolls-Royce

  5+ ansIngénieur professionnellement qualifié, membre de l'OIQ; 5 ans d'expérience ou plus en environnement de fabrication; Usinage conventionnel et CNC, assemblage et polissage

  CNC lathe, CNC milling machine, Fanuc robot, ABB robot

  1 mois

  Superviseur - Réparation des composants (1er quart) / Team Leader - Component Repair (1st shift)

  Lachine, QC

  Temps plein

  

  Rolls-Royce

  5+ ans5+ gestion5 ans d'expérience en gestion d'équipe; Expérience en milieu syndiqué; Baccalauréat en administration des affaires ou équivalent

  ERP, Workday

  1 mois

  Superviseur - Ligne de moteur (1er quart) / Team Leader - Engine Lines (1st shift)

  Montréal, QC

  Temps plein

  

  Rolls-Royce

  5+ ans5+ gestion5 ans d'expérience en gestion d'équipe, idéalement en milieu syndiqué; Français parlé et écrit, anglais parlé et écrit (exigences FAA); Connaissance de la production, de la chaîne d'approvisionnement et de la planificati

  ERP, Système de gestion de la qualité, Système de production de Rolls-Royce

  1 mois

  Ingénieur en Amélioration Continue / Continuous Improvement Engineer

  Montréal, QC

  Temps plein

  

  Rolls-Royce

  5+ ans5 ans d'expérience dans un rôle similaire; Baccalauréat en génie industriel ou équivalent; Membre de l'Ordre des Ingénieurs du Québec

  Python, R, SQL, Power BI, Tableau, ERP

• 1 mois

  MQ-9B RPAS Aircraft Maintenance Engineer (Evergreen)

  Greenwood, NS

  Temps plein

  CC

  CAE Canada Inc

  5+ ansCandidates need an aviation technician diploma or RCAF AVN/AVS qualification, an AME licence with M1, M2 or E rating, and at least 5 years of first- and second-line aircraft maintenance experience. Candidates also need a valid driver's licence, deployable fitness, eligibility to work in Canada, and the ability to obtain Controlled Goods and NATO Secret clearances.

  aircraft ground support equipment, technical publications

12 entreprises