Emplois “radiation equipment” au Canada – Page 12

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 9j

  Radiation Technologist, CT - Eagle Ridge Hospital

  Coquitlam, BC

  43,24–54,01 $/h

  

  Fraser Health Authority

  1+ ansCandidates need CAMRT certification, completion of an advanced CT specialty program and one year of recent related experience. They also need CPR (BCLS) certification and must pass a physical fitness assessment for the job.

  PACS, radiology information system

  12j

  Radiological technologist - mission memorial hospital

  Mission, BC

  40,19–50,20 $/h

  

  Fraser Health Authority

  Candidates need CAMRT certification and demonstrated knowledge of safe radiographic practice, PACS and Radiology Information Systems. They should communicate well with patients, families and health staff, and have CPR skills.

  PACS, RIS, Radiographic equipment, Computerized imaging equipment

• 9j

  Medical Radiation Technologist, Diagnostic Imaging, RPT

  Guelph, ON

  Sur placeTemps partiel

  

  Guelph General Hospital: When the doors to Guelph General Hospital were opened on August 16, 1875, the hospital had 12 beds, a small infectious room, and a dispensary.

  Candidates need active membership in good standing with the College of Medical Radiation and Imaging Technologists of Ontario (CMRITO), knowledge of multiple imaging modalities, and proven radiation safety knowledge. Strong communication, teamwork and intermediate Microsoft Office skills are also required.

  Microsoft Office

• 9j

  Technologist - Mechanical Assembly/Testing

  Toronto, ON

  

  Kinectrics: Kinectrics is an integrated lifecycle management services company providing testing, inspection, certification and engineering consulting for the…

  8+ ansCandidates need about 8 years of hands-on mechanical assembly, fabrication and pressure testing experience, plus a related mechanical technology background or equivalent education. A nuclear site security clearance is required, which can take up to 12 months.

  Hand tools, Power tools, Lifting equipment, Test instrumentation

• 9j

  Manager, Waste Technical Services

  Manitoba

  Temps plein

  

  Canadian Nuclear Laboratories LTD

  10+ ansCandidates need a post-secondary credential or equivalent experience, at least ten years of progressively responsible waste, transport or related experience, and leadership in a regulated nuclear or industrial setting. They also need knowledge of radioactive waste rules, TDG and CNSC requirements, and Reliability Status clearance eligibility.

  eMWaste, waste tracking systems, personal protective equipment

  9j

  Project Manager

  Chalk River, ON

  Temps plein

  

  Canadian Nuclear Laboratories LTD

  10+ ansCandidates need a degree in project management, engineering, applied sciences, business or commerce, and ten years of senior project experience. They must know nuclear licensing rules, codes and standards, and hold or be eligible for Reliability Status with Site Access Security Clearance.

  9j

  Manager, Waste Program Oversight

  Manitoba

  Temps plein

  

  Canadian Nuclear Laboratories LTD

  10+ ansCandidates need a bachelor's degree in engineering, environmental science, chemistry, physics or a related field, plus at least ten years of progressively responsible experience in radioactive waste or nuclear operations. They also need leadership experience in regulated environments and knowledge of CNSC regulations, sampling plans and gamma spectroscopy.

  gamma spectroscopy systems, gamma assay systems, radiation detection instrumentation

• 9j

  Health and Safety Specialist

  Midland, ON

  Temps plein

  

  RTX

  2+ ansCandidates need a degree or diploma in Health and Safety (or equivalent) and working knowledge of OHS standards, WHMIS and PPE use. Strong attention to detail and the ability to juggle competing deadlines are required, and a CRSP, CRST or CIH designation plus 2-5 years in a manufacturing EHS role are preferred.

  PPE, cleaning equipment, sampling equipment

• 9j

  Automotive Technician

  Edmonton, AB

  90k–150k $/an

  

  Midas - Edmonton 5392

  Candidates need a Certificate of Qualification, a valid driver's licence and their own tools. Midas - Edmonton 5392 asks for experience with brakes, exhaust, suspension, tires and engine diagnostics, and the ability to work independently and in a team.

  Computer diagnostic systems, Lifts, Tire changing equipment, Alignment machines, Diagnostic tools

  10j

  Automotive Technician

  Edmonton, AB

  90k–150k $/an

  

  Midas - Edmonton 5392

  Candidates need a Certificate of Qualification, a valid driver's licence and their own tools. Midas - Edmonton 5392 asks for experience with brakes, exhaust, suspension, tires and engine diagnostics, and the ability to work independently and in a team.

  Computer diagnostic systems, Lifts, Tire changing equipment, Alignment machines, Diagnostic tools

• 11j

  Senior Customer Project Manager (Mississauga, ON)

  Mississauga, ON

  96k–151k $/anTemps plein

  

  Philips

  7+ ansCandidates need 7+ years of project or account management in healthcare technology, a Bachelor's degree in a related field, and a PMP. Experience with PACS, VNA and cloud technologies is required, and ITIL Foundation is preferred.

  Project management, Client relationship management, Communication skills, Stakeholder management, Leadership, Computer science

  11j

  Field Service Employee - Imaging Systems (Field: London, ON)

  London, ON

  51k–80k $/anTemps plein

  

  Philips

  1+ ansCandidates need 1+ years in diagnostic imaging service or 3+ years in electromechanical work, plus a college diploma in electronics (biomedical engineering technology preferred). They must apply electronic, mechanical and networking knowledge and work flexible hours, including on-call and weekends.

  test equipment, diagnostic imaging systems

  11j

  Field Service Employee - Medical Imaging (Field: Sudbury, ON)

  Greater Sudbury, ON

  59k–109k $/anTemps plein

  

  Philips

  2+ ansCandidates need 2+ years in diagnostic imaging service or 4+ years in electromechanical industries, with a college diploma in electronics (a biomedical engineering technology diploma is preferred). Strong electronic, mechanical and networking skills, plus willingness to work flexible hours and handle radiation sources, are required.

  Test equipment, Diagnostic tools

• 12j

  HV Transformer Engineer- Mandarin Speaker

  Burnaby, BC

  115k–145k $/anTemps plein

  LE

  Leading Edge

  5+ ansCandidates need a Bachelor's degree in electrical engineering, 5 to 8 years of transformer design or failure analysis experience, and skill in interpreting DGA, SFRA and Tan Delta tests against NETA, CSA and IEEE standards. Full fluency in English and Mandarin, a valid driver's licence and passport, and legal authorization to work in Canada are required.

  Easy Power, ETAP, PSCAD, SKM Tools, SolidWorks, ANSYS Maxwell

• 12j

  Nuclear Medicine Technologist I

  Edmonton, AB

  

  Alberta Health Services

  Candidates need a diploma from an accredited Nuclear Medicine Technology program and active or eligible registration with the Alberta College of Medical Diagnostic and Therapeutic Technologists. Enhanced Practice or CTIC credentials are required, and PET/CT experience is preferred.

  gamma camera, ECG monitor, cardiac stress equipment, radiation safety devices, Connect Care

  12j

  Medical Radiation Technologist II

  Red Deer, AB

  

  Alberta Health Services

  Candidates need a Medical Radiation Technologist diploma from an accredited program and active or eligible registration with the Alberta College of Medical Diagnostic and Therapeutic Technologists. They also need BCLS, venipuncture and medication administration authorizations, and CAMRT CT certification completed or in progress.

  Imaging equipment

  12j

  Medical Radiation Technologist II

  Calgary, AB

  Temps partiel

  

  Alberta Health Services

  5+ ansCandidates need a diploma from an accredited Medical Radiation Technologist program and registration or eligibility with the Alberta College of Medical Diagnostic and Therapeutic Technologists. They also need at least 5 years of current CT experience and current BCLS certification.

  Connect Care, imaging equipment

  12j

  Combined Laboratory / X-Ray Technologist I

  Didsbury, AB

  À la journée

  

  Alberta Health Services

  1+ ansCandidates need a CLXT diploma, ACCLXT registration or eligibility, and at least one year of CLXT experience. They also need current BCLS-HCP, an N95 fit test, It's Your Move training and Connect Care training.

  X-ray equipment, Connect Care

  12j

  Medical Radiation Technologist I

  Edmonton, AB

  

  Alberta Health Services

  Candidates need a diploma from an accredited Medical Radiation Technologist program and active or eligible registration with the Alberta College of Medical Diagnostic and Therapeutic Technologists. A current Basic Cardiac Life Support certificate is also required.

  fluoroscopy equipment, portable radiography equipment

  12j

  Medical Radiation Technologist II

  Red Deer, AB

  

  Alberta Health Services

  Alberta Health Services needs a diploma from an accredited Medical Radiation Technologist program and active or eligible registration with the Alberta College of Medical Diagnostic and Therapeutic Technologists. Candidates also need current BCLS-HCP, venipuncture certification, strong communication skills, and the ability to work well under pressure.

  interventional imaging equipment

  12j

  Medical Radiation Technologist I

  Edmonton, AB

  Temps partiel

  

  Alberta Health Services

  Candidates need a diploma from an accredited Medical Radiation Technologist program and active or eligible registration with the Alberta College of Medical Diagnostic and Therapeutic Technologists. They also need current Basic Cardiac Life Support (BCLS-HCP) certification.

  Fluoroscopy equipment, Portable radiography equipment

• 12j

  Staff Respiratory Therapist - Repost

  Winnipeg, MB

  Sur place

  

  Winnipeg Regional Health Authority: The WRHA also provides health care support and specialty referral services to nearly 500,000 Manitobans who live outside its boundaries as well as…

  Winnipeg Regional Health Authority needs a Respiratory Therapy entry-to-practice credential and current MARRT registration, plus Neonatal Resuscitation certification. Candidates must complete the in-house Pulmonary Function training, pass criminal and abuse registry checks, and be able to stand, walk and run to emergencies.

  medical gas cylinders, monitors, measuring devices, wheeled medical equipment

• 12j

  Unit Clerk, Oncology Chemo - BC Cancer Victoria

  Victoria, BC

  30,03 $/hTemps plein

  

  PHSA - Provincial Health Services Authority

  1+ ansCandidates need Grade 12, medical terminology and a recognized Nursing Unit Clerk program plus one year of recent related experience. They also need strong verbal and written communication, 40 wpm keyboarding, organizational ability and a commitment to Indigenous cultural safety and anti-racism learning.

  Electronic health record system

  12j

  Unit Clerk, Oncology Chemo - BC Cancer Victoria

  Victoria, BC

  30,03 $/hTemporaire, Temps plein

  

  PHSA - Provincial Health Services Authority

  1+ ansCandidates need Grade 12, medical terminology, a recognized Nursing Unit Clerk program and one year of recent related experience. Typing speed of 40 words per minute and strong computer and communication skills are also required.

  Electronic health record system, Computer software applications, Telephone switchboard

11 entreprises