Emplois “lubrication systems” au Canada – Page 13

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 20j

  Mechanic, Delta Ladner

  Delta, BC

  25–35 $/h

  FT

  Fountain Tire

  Candidates need a licensed Automotive Service Technician trade ticket, strong automotive diagnostic knowledge, and a valid driver's licence with a satisfactory annual driver's abstract. Strong written and verbal communication skills and a commitment to customer service are also required.

  diagnostic equipment, mechanical service equipment

  21j

  Journeyperson Technician, Lloydminster

  Lloydminster, AB

  FT

  Fountain Tire

  Candidates need Red Seal or licensed Automotive Service Technician status, strong automotive knowledge and diagnostic skills, and good written and verbal communication. A valid driver's licence and a satisfactory driver's abstract each year are also required.

  diagnostic equipment, service equipment

• 20j

  Electrical Generation Technician

  Inuvik, NT

  54,10–65,72 $/hTemps plein

  

  NORTHWEST TERRITORIES POWER CORPORATION: NTPC also owns and operates alternative energy assets used for the supply of residual heat, solar power and co-generation.

  5+ ansCandidates need an Electrical Technologist certification, preferably in power generation, with at least five years of electrical test equipment and genset troubleshooting experience, and utility or power plant experience. They must be eligible for CET registration, hold a full Class 5 licence, and pass a criminal records check.

  electrical test equipment, electronic governors, voltage regulators, PLC systems, SCADA, AutoCAD

  21j

  Diesel Mechanic

  Inuvik, NT

  50,05–60,81 $/hTemps plein

  

  NORTHWEST TERRITORIES POWER CORPORATION: NTPC also owns and operates alternative energy assets used for the supply of residual heat, solar power and co-generation.

  5+ ansCandidates need a Journeyperson Heavy Duty Diesel Mechanic or Heavy Equipment Technician certificate, preferably Red Seal, and at least five years of directly related diesel generator experience. A valid Class 5 driver's licence and a successful criminal records check are required, and the ability to read manuals and diagnose problems is expected.

  CMMS, Overhaul tools, Vibration monitoring equipment

• 20j

  Service Technician - Shop

  Ontario

  Temps plein

  

  Brandt in Canada

  3+ ansCandidates need a trade qualification in heavy equipment, agriculture or truck/transport and about 3 years of relevant experience. They must know mechanical, electrical and hydraulic systems, have diagnostic and computer skills, and communicate well in writing and orally.

  diagnostic computer equipment

• 20j

  Licensed diesel truck technician/mechanic i

  Stoney Creek, ON

  43–48 $/h

  

  Penske Truck Leasing: Penske Truck Leasing is a Penske Transportation Solutions company headquartered in Reading, Pennsylvania.

  5+ ansCandidates need 5+ years of practical tractor-trailer maintenance experience, a Red Seal or 310T provincial licence, and a Class D or Class 3 driver's licence with air brake certification, or the ability to obtain it within 6 months. Proficiency with diagnostic, welding and power tools is required.

  hand tools, power tools, pneumatic wrenches, welding equipment, hydraulic jacks, hoists

  21j

  Licensed diesel truck technician/mechanic i

  Ontario

  44–48 $/h

  

  Penske Truck Leasing: Penske Truck Leasing is a Penske Transportation Solutions company headquartered in Reading, Pennsylvania.

  5+ ansCandidates need 5+ years of practical tractor-trailer maintenance experience, a Red Seal or 310T provincial licence, and a class D or class 3 driver's licence with air brake certification (or the ability to obtain it within 6 months). Proficiency with hand, power, welding and diagnostic tools and basic computer skills are required.

  hand tools, power tools, pneumatic wrenches, welding equipment, hydraulic jacks, hoists

  21j

  Diesel truck technician/mechanic iii (helper/apprentice)

  Ontario

  28,50 $/h

  

  Penske Truck Leasing: Penske Truck Leasing is a Penske Transportation Solutions company headquartered in Reading, Pennsylvania.

  1+ ansCandidates need a high school diploma and currently be enrolled in an apprenticeship program, with 1-2 years of vehicle or truck repair experience preferred. A class G or class 5 driver's licence is required, with class DZ to be obtained within 6 months of hire, plus working knowledge of hand tools and the ability to work in non-climate controlled conditions.

  hand tools, pneumatic wrenches, welding equipment, hydraulic jacks, hoists, pressure gauges

• 21j

  Electrician

  Mississauga, ON

  51,75 $/h

  

  CRH

  Candidates need a valid Electrical Certificate of Qualification (309A or 442A), proof of apprenticeship, and working knowledge of PLCs, motors, relays and transformers. Experience with outside vendors and contractors, a valid driver's licence, and the ability to climb ladders and scaffolds are also required.

  PLC, schematic drawings, instrumentation test equipment

• 21j

  Certified Millwright

  Springbrook, AB

  43,65 $/hTemps plein

  PH

  Parrish & Heimbecker, Limited: Parrish & Heimbecker, Limited (P&H) is a growth-oriented, diversified, and vertically integrated company with operations across Canada that include…

  Candidates need a Journeyman or Red Seal Millwright certification, fabrication and welding experience, and ideally flour mill experience with conveyors, elevators, compressors, gearboxes and similar equipment. They must be able to lift 25 kg, work in dust, heat and outdoor conditions, and handle an on-call schedule.

  CMMS, Micrometers, Dial indicators, Feeler gauges, Bore gauges, Forklift

• 21j

  Mechanic Full Time

  Toronto, ON

  Temps plein

  

  Marriott

  Candidates need a driver's licence and a high school diploma or GED, with some general maintenance and painting experience preferred. Hotel engineering experience is an asset, and the ability to lift up to 50 pounds without help is required.

  POS

• 21j

  Electronics Specialist 1

  St. John's, NL

  Temps plein

  

  Canada Post - Postes Canada

  2+ ansCanada Post needs a 2-year electronics diploma (DEC in Quebec) and two years of electronics maintenance experience within the last five years, or a Canada Post-funded diploma. Candidates need hands-on skill with electronic and mechanical systems, physical stamina for heavy lifting and cramped spaces, and basic computer skills.

  Hand tools, Power tools, Test equipment, Electronic gauging devices, Motorized lifting equipment, Computerized Maintenance Management System

• 21j

  Licensed Diesel Truck Technician/Mechanic I

  Stoney Creek, ON

  43–48 $/hTemps plein

  

  Penske: Penske Truck Leasing is a Penske Transportation Solutions company headquartered in Reading, Pennsylvania.

  5+ ansCandidates need 5+ years of practical tractor-trailer maintenance experience, a Red Seal or 310T provincial licence, and a Class D or Class 3 driver's licence with air brake certification, or the ability to obtain it within 6 months. Strong tool proficiency and basic computer skills are also required.

  hand tools, power tools, pneumatic wrenches, welding equipment, hydraulic jacks, hoists

  22j

  Diesel Truck Technician/Mechanic III (Helper/Apprentice)

  Ontario

  28,50 $/hTemps plein

  

  Penske: Penske Truck Leasing is a Penske Transportation Solutions company headquartered in Reading, Pennsylvania.

  1+ ansCandidates need a high school diploma, a class G or class 5 driver's licence, and must be enrolled in an apprenticeship program. Some vehicle repair experience and working knowledge of hand tools are preferred or required.

  hand tools, pneumatic wrenches, welding equipment, hydraulic jacks, hoists, pressure gauges

• 21j

  Reliability Mechanic

  Rouyn-Noranda, QC

  

  Dhilmar Éléonore: Dhilmar is a newly formed private mining company based in Royaume-Uni.

  5+ ansCandidates need a college or vocational diploma in industrial mechanics and at least 5 years of predictive maintenance experience, especially vibration analysis. A valid driver's licence is required, and training in vibration, thermography or oil analysis is an asset.

  Thermal imaging camera, Vibration analyzer, Oil sampling equipment, Vibration monitoring database, Historian system

• 21j

  Mechanics Technician (Contract)

  Calgary, AB

  Sur placeContrat

  

  Precision AI

  Candidates need hands-on experience repairing mechanical systems, ideally in agricultural, aerospace, robotics or automotive settings. They should read mechanical drawings, use hand and torque tools, and have a diploma or certificate in mechanical technology or equivalent experience.

  Hand tools, Power tools, Torque tools, 3D printers, Welding equipment, Manual mill

• 21j

  MiIlwright (433A)

  Hamilton, ON

  

  Triple M Metal

  5+ ansCandidates need a valid Industrial Mechanic Millwright (433A) certification and at least 5 years of similar experience. Strong troubleshooting and repair skills and good written and verbal communication are also required.

  tool crib equipment

• 21j

  Mechanic Full Time

  Toronto, ON

  Temps plein

  AM

  at Marriott

  Candidates need a driver's licence and some general maintenance experience, with painting and surface preparation experience an asset. Hotel engineering or maintenance experience is a plus, and no supervisory experience is needed.

  Radio, Kitchen equipment, Vacuum cleaners

• 21j

  Industrial Millwright / Mechanical Fitter - Adhoc

  St. John's, NL

  Sur placeTemps plein

  W

  Wood

  Wood needs a journeyperson millwright, Red Seal or equivalent, with four completed apprenticeship periods or 6,240 hours of trade experience. Candidates need offshore certificates such as BST, H2S Alive, WHMIS, Fall Protection and Confined Space Entry, and must pass a drug and alcohol test and CAPP medical.

  Hoists, Jacks, Micrometers, Laser alignment equipment, Engine lathe, Transit and level

• 21j

  CNC Machinist

  Oakville, ON

  29–38,50 $/h

  

  BWXT

  5+ ansBWXT needs machinists with 5+ years running 4- and 5-axis CNC mills and multi-axis lathes, able to read engineering drawings with GD&T and metrology knowledge. A Certificate of Qualification is an asset, and aerospace, defence or nuclear experience is a definite asset.

  CNC mill, CNC lathe, bandsaw, manual mill, manual drill press, micrometers

• 22j

  Mechanical Engineering Co-Op Student

  Bowmanville, ON

  25 $/h

  

  VCNA

  Candidates need to be enrolled in a Canadian mechanical engineering undergraduate program, ideally with 1-2 years of study completed. They need an understanding of industrial equipment, CAD and Microsoft Office skills, and the ability to work in a physically demanding plant.

  SolidWorks, AutoCAD, Microsoft Office

• 22j

  Heavy Duty Mechanic (3rd year Truck and Transport Apprentices, or 4th year Heavy Equipment Apprentices and HET Student will be considered)

  Edmonton, AB

  39,68–49,35 $/h

  CO

  City Of Edmonton

  Candidates need an Alberta qualified apprentice or Journeyperson certificate in Heavy Duty Mechanic/Technician, with some experience in electrical systems, air brakes and engines. They also need a valid Alberta Class 5 and Class 3 licence with air brake endorsement, and must be fit for a respirator and pass a physical abilities test that includes lifting 75 pounds.

  diagnostic scanning tools, diagnostic computer software, AssetWorks M5

• 22j

  CNC Machinist (Rotating Shift)

  Hamilton, ON

  65k–82k $/anSur placeTemps plein

  

  Smiths Group

  5+ ansJohn Crane needs a candidate with hands-on CNC milling or turning experience, the ability to read blueprints and G-code, and a high school diploma plus two years of technical training. Over five years of related experience and Red Seal or equivalent are also listed, along with the ability to work loud plant-floor conditions wearing PPE.

  CNC mill, vernier calliper, CMM, Mazak, Okuma, Haas

• 22j

  Apprentice Automotive Technician - Parkland Chrysler

  Spruce Grove, AB

  36–38 $/h

  

  AutoCanada Inc.: AutoCanada’s Canadian Operations segment operates 64 franchised dealerships across multiple provinces, along with three independent used-vehicle…

  Candidates need a traditional apprenticeship or Motive Power training, basic computer skills, and a valid Canadian driver's licence with a safe driving record. Shop experience and oil change or tire experience are preferred, along with the ability to handle heavy lifting and long periods of standing.

  computerized diagnostic tools, power tools, hand-held equipment

19 entreprises