Emplois “ANSYS” au Canada – Page 14

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Senior Electrical Engineer

  Mississauga, ON

  150k–220k $/anHybrideTemps plein

  

  AECOM: AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025.

  8+ ansCandidates need a bachelor's degree in electrical engineering, 8+ years of multidisciplinary design experience, and registration as a Professional Engineer in British Columbia or eligibility for it. Proficiency with power system modeling tools and drafting software, plus knowledge of the Canadian Electrical Code, is required.

  eTAP, PTW, AutoCAD, Revit, Navisworks, PLC

  1 mois

  Senior Electrical Engineer

  Greater Sudbury, ON

  120k–200k $/anHybrideTemps plein

  

  AECOM: AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025.

  8+ ansCandidates need a bachelor's degree in electrical engineering, 8+ years of multidisciplinary design experience, and registration as a Professional Engineer in British Columbia or eligibility for it. Proficiency with power system modeling tools and drafting software, plus knowledge of the Canadian Electrical Code, is required.

  eTAP, PTW, AutoCAD, Revit, Navisworks, PLC

  1 mois

  Structural Engineer – Hydropower Sector

  Montréal, QC

  110k–140k $/anHybrideTemps plein

  

  AECOM: AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025.

  6+ ansCandidates need a civil (structural) engineering bachelor's degree, a P.Eng. in good standing in Canada, and at least 6 years of structural design experience. Strong reinforced concrete and steel design skills and structural analysis software proficiency are required.

  Advance Design, ANSYS, ABAQUS

• 1 mois

  Electrical Engineering Technician/Technologist - Water

  Victoria, BC +1

  Temps plein

  

  Stantec

  5+ ansCandidates need an electrical engineering technical diploma or equivalent, plus 5-6 years of electrical design and drafting on water or wastewater projects. They must know CEC code and standards such as IEEE, ANSI, API and CSA, and be proficient in AutoCAD, Revit, Bluebeam or Adobe Acrobat, and Microsoft Office.

  AutoCAD, Revit, Bluebeam, Adobe Acrobat, Microsoft Office

  1 mois

  Intermediate Conveyance Engineer - Water

  Burnaby, BC +6

  Temps plein

  

  Stantec

  5+ ansCandidates need a bachelor's degree in mechanical, civil or environmental engineering, a P.Eng. (or eligibility in BC), and 5 to 10 years of water or wastewater infrastructure experience. Hydraulic modelling skills in tools such as AFT Fathom, InfoWorks or WaterGEMS are required.

  AFT Fathom, InfoWorks, InfoWater, WaterGEMS, SewerGEMS, ANSYS Fluent

  1 mois

  Intermediate Structural Engineer - Hydropower & Dams

  Dartmouth, NS +4

  HybrideTemps plein

  

  Stantec

  4+ ansCandidates need a structural engineering degree, a Professional Engineer designation in a Canadian province, and four to six years of design experience. They must know CSA A23.3 and CSA S16 and be proficient in STAAD.Pro or SAP2000 and Microsoft Office.

  STAAD.Pro, SAP2000, Mathcad, Ansys, Abaqus, Microsoft Office

• 1 mois

  Oracle EPM Data Integration Lead Consultant

  Montréal, QC

  TélétravailTemps plein

  

  Alithya

  5+ ansCandidates need 5+ years of experience with Oracle EPM Cloud and integration tools such as Data Management and ODI, plus strong SQL skills and Java, Groovy or C# development. A degree in computer science or a related field is required, and English must be proficient, with intermediate French.

  Oracle EPM Cloud, FDMEE, Cloud Data Management, ODI, EPM Automate, Oracle Integration Cloud

• 1 mois

  Sr. Hydro Mechanical Engineer

  Calgary, AB

  Temps plein

  ES

  ENTRUST Solutions Group, A Leidos Company

  7+ ansCandidates need an ABET-accredited mechanical engineering degree, a PEng licence and 7 to 12 years of hydropower experience. Strong hydro turbine design, commissioning and FEA or CFD experience is required, along with a valid driver's licence and willingness to travel.

  ANSYS, AutoCAD, Microstation

• 1 mois

  Lead Electrical Engineer, Resources

  Greater Sudbury, ON +1

  Temps plein

  W

  WSP

  18+ ansCandidates need at least 18 years of electrical design experience in heavy industry, a Professional Engineer (P.Eng.) licence, and knowledge of CSA, IEEE and ANSI standards. They also need experience leading and mentoring engineers, and a valid driver's licence.

  ETAP, EasyPower

  1 mois

  Senior Electrical Engineer, Resources

  Greater Sudbury, ON +1

  Temps plein

  W

  WSP

  12+ ansCandidates need at least 12 years of electrical design experience on heavy industrial facilities, a P.Eng. registration, and knowledge of CSA, ANSI and IEEE standards. A valid driver's licence and the ability to visit industrial sites are also required.

  ETAP, EasyPower

  1 mois

  Senior Industrial Hygienist and Business Development Lead

  Vancouver, BC +2

  Temps plein

  W

  WSP

  8+ ansCandidates need 8 to 15 years of occupational hygiene, safety or indoor air quality consulting experience, a relevant degree, and a CIH or ROH designation (or eligibility within 12 months). They also need proven business development skills, project management experience, and an unrestricted Class 5 licence with a clean driving record.

  WorkSafeBC standards

  1 mois

  Senior Electrical Engineer, Resources

  Etobicoke, ON +11

  Temps plein

  W

  WSP

  12+ ansCandidates need at least 12 years of electrical design experience on heavy industrial facilities and a Professional Engineer (P.Eng.) licence in Ontario. Strong knowledge of CSA, IEEE and ANSI standards and power system modelling tools is required.

  ETAP, EasyPower

  1 mois

  Intermediate Electrical Engineer

  Terrace, BC

  Temps plein

  W

  WSP

  5+ ansCandidates need 5+ years of electrical design experience on heavy industrial projects and a P.Eng in BC. WSP also asks for knowledge of CSA, ANSI and IEEE standards, power system modelling skills and a valid driver's licence.

  ETAP, EasyPower, Microsoft Office, PLC, DCS, HMI

  1 mois

  Professionnel chevronné, Génie mécanique

  Québec, QC +4

  Temps plein

  W

  WSP

  5+ ansBaccalauréat en génie mécanique et permis valide de l'OIQ; Minimum de 5 ans d'expérience en génie mécanique industriel ou minier; Expérience en génie-conseil, mines, mécanique lourde, fabrication d'acier ou construction

  Plant 3D, Inventor, Navisworks, Nastran, Ansys, Revit

• 1 mois

  Electrical Designer

  Etobicoke, ON +1

  HybrideTemps plein

  SM

  S&C Minimal

  5+ ansCandidates need an electrical engineering or technology education, about 5 years of switchgear or electrical design experience, and strong skills in MicroStation, Zuken E3, AutoCAD and Oracle. Knowledge of medium-voltage components and relay programming is also expected.

  MicroStation, Zuken E3, AutoCAD, 3Dx, SmarTean, Oracle

• 1 mois

  Silicon Photonics Designer and Test Engineer

  Ottawa, ON

  HybrideTemps plein

  R

  Ranovus

  2+ ansCandidates need a Master's or PhD in Engineering Physics, Electrical Engineering, or a related field, plus at least 2 years of silicon photonics design and testing experience. Hands-on lab skills with optical fibers, probes, and polarization, plus MATLAB, Python, and Ansys Lumerical, are required.

  Ansys Lumerical, MATLAB, Python, optical fibers, electrical probes, polarization controllers

• 1 mois

  Senior Aeronautical Structural Engineer

  London, ON

  Sur placeTemps plein

  IC

  ITPS (Canada) LTD

  6+ ansCandidates need a bachelor's degree in an engineering discipline, at least 6 years of aerospace engineering experience, and work on Transport Canada certification and Means of Compliance. Strong stress analysis, configuration control and mentoring skills are also required.

  SolidWorks, PDM, ANSYS, NASTRAN, Patran, Femap

• 1 mois

  Mechanical Designer

  Welland, ON

  Sur placeTemps plein

  

  Bosch Group: The company generated sales of 91 billion euros in 2025.

  Candidates need a bachelor's degree in mechanical engineering or a related field, plus experience with 3D CAD and FEA such as Autodesk Inventor or CREO. Hydraulic or pneumatic design, GD&T, and technical drawing standards are also expected.

  Autodesk Inventor, CREO, FEA software

• 1 mois

  Ingénieure ou Ingénieur en mécanique lourde (Hydroélectricité)

  Montréal, QC

  HybrideTemps plein

  

  CIMA+

  5+ ansDiplôme universitaire en génie mécanique ou équivalent; Admissibilité à l'Ordre des ingénieurs du Québec; Au moins cinq ans d'expérience en conception mécanique

  CATIA, SolidWorks, Inventor, SAFI, ADA

  1 mois

  Ingénieure ou Ingénieur en mécanique lourde (Hydroélectricité)

  Sherbrooke, QC

  HybrideTemps plein

  

  CIMA+

  5+ ansDiplôme universitaire en génie mécanique ou équivalent; Admissibilité à l'Ordre des ingénieurs du Québec; Au moins cinq ans d'expérience en conception mécanique

  CATIA, SolidWorks, Inventor, SAFI, ADA

• 1 mois

  Application Engineering - Proposals

  Toronto, ON

  Sur placeTemps plein

  

  Armstrong Fluid Technology: With advanced solutions that leverage edge computing, IoT, machine learning, digital twin technology and demand-based control, Armstrong provides…

  5+ ansCandidates need a bachelor's degree in mechanical engineering or a related field, at least 5 years in engineering or industrial projects, and 4 years in specification review, estimating and proposal development. Knowledge of pumping, HVAC, fire pump systems and standards such as ANSI, ASHRAE and NFPA is required.

  CRM systems

• 1 mois

  Aircraft Design Engineer –Aerospace

  Vaughan, ON

  Sur placeTemps plein

  

  Volatus Aerospace: With deep technological and subject matter expertise and over 100 years' worth of combined institutional knowledge in aviation, Volatus provides…

  3+ ansCandidates need a Bachelor's or Master's in Mechanical or Aerospace Engineering and 3 to 5 years of aircraft design experience. Required skills include SolidWorks, FEA and CFD tools, aircraft conceptual sizing and hands-on prototyping.

  SolidWorks, OpenVSP, XFOIL, XFLR5, Ansys Fluent, SolidWorks Simulation

• 1 mois

  Director/Vice President, Nuclear Engineering

  Waterloo, ON

  Sur placeTemps plein

  C

  CSMC

  10+ ansCandidates need a master's degree in nuclear, mechanical or a related field and 10 to 15+ years of nuclear or reactor development experience. They must have CNSC-regulated project experience, leadership of engineering teams, and hands-on use of tools like ANSYS, COMSOL and MCNP.

  ANSYS, COMSOL, OpenFOAM, MCNP, SERPENT

• 1 mois

  Ingénieur Sénior – Conception avancée/Senior Advanced Design Engineer

  Montréal, QC

  HybrideTemps plein

  

  EVIO

  10+ ansCandidates need 10 to 15+ years of aerospace experience, a solid aircraft design background and knowledge of FAA, TCCA and EASA rules for Part 25/23 aircraft. They should have strong skills in CATIA V5, 3DEXPERIENCE, NX, ANSYS, MATLAB and NASTRAN, plus metallic and composite materials. An advanced degree in aerospace or aeronautical engineering (or equivalent experience) is expected.

  CATIA V5, 3DEXPERIENCE, NX, ANSYS, MATLAB, NASTRAN

14 entreprises