Emplois “Optical hardware” au Canada – Page 14

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Staff Software Engineer - ML hardware modelling

  Télétravail au Canada

  Télétravail

  

  hireVouch: Company Marketing Strategy

  8+ ansCandidates need a BS or higher in computer, software or electrical engineering, 8+ years of hardware modelling or simulation experience, and proficiency in C++ and Python. Linux development and ML accelerator experience are preferred.

  C++, Python, Linux

  1 mois

  Forward Deployed Engineer

  Quebec

  Télétravail

  

  hireVouch: Company Marketing Strategy

  6+ ansCandidates need 6+ years of production software engineering combined with industrial automation or applied AI, strong Python, and cloud and edge deployment experience. Solid networking knowledge, customer-facing skills and fluent French and English are also required.

  Python, Linux, Docker, Git, NVIDIA Jetson, OPC-UA

• 1 mois

  Senior Electronics Designer – High-Speed PCB and Embedded Systems

  Waterloo, ON

  100k–135k $/anTemps plein

  

  Randstad Canada

  8+ ansCandidates need a bachelor's degree in electrical or computer engineering (master's or PhD preferred), typically 8+ years of hardware design experience, and expert skills in PCB layout tools, high-speed and mixed-signal design, signal and power integrity, and lab test equipment. Strong technical leadership and communication skills are required.

  Siemens PADS, Altium Designer, Cadence Allegro, high-bandwidth oscilloscope, logic analyzer, spectrum analyzer

• 1 mois

  Assembler & Packer

  Vaughan, ON

  

  Mircom Group of Companies: Mircom Group of Companies is global designer, manufacturer, and distributor, of intelligent building solutions, bringing innovation and flexibility…

  3+ ansCandidates need a high school diploma or equivalent, and electronics assembly experience is an asset. They must read and follow drawings, work accurately with attention to detail, and communicate well in English.

  Hand tools, Power tools, Soldering equipment, Automatic Optical Inspection (AOI), Electronic test equipment, Magnifying devices

• 1 mois

  Divisional Director, Engineering

  Ottawa, ON

  Sur placeTemps plein

  

  Pivot + Edge

  7+ ansSenstar needs a leader with seven to ten years of technology product leadership, experience managing managers, and deep technical grounding in a sensor domain such as embedded systems, RF, or photonics. A degree in Computer Science, Engineering, or a related field is required.

  Signal processing, Design hardware, Estimating, Documentation, Regulatory compliance, Firmware

• 1 mois

  Mechanical Designer

  Calgary, AB

  Temps plein

  EI

  Ecolab Inc.

  5+ ansCandidates need a diploma in mechanical engineering technology or design, at least 5 years of mechanical design experience, and skill in SolidWorks and Revit. Experience making manufacturing drawings and knowledge of AWS/ASME welding standards are also required.

  SolidWorks, Revit, CAD software

  1 mois

  Test Technologist

  Calgary, AB

  Temps plein

  EI

  Ecolab Inc.

  Candidates need a diploma or degree in electrical, electronics, mechanical or a related field. They need hands-on experience with sensors, data acquisition, bench test tools and data analysis, and programming in Python or C/C++.

  oscilloscope, power analyzer, logic analyzer, multimeter, DAQ, SolidWorks

  1 mois

  Thermal Mechanical Engineering Team Lead

  Calgary, AB

  Temps plein

  EI

  Ecolab Inc.

  5+ ansCandidates need a bachelor's degree in mechanical or a similar engineering field, at least 5 years of relevant experience, and strong knowledge of thermal design, fluid dynamics and product introduction. Preferred: 3+ years of people leadership, high-volume industrial production experience, and a P.Eng or similar designation.

  CAD, FEA, PLM, GD&T, DFMEA

  1 mois

  Test Specialist - PCL

  Calgary, AB

  Temps plein

  EI

  Ecolab Inc.

  3+ ansCandidates need a bachelor's degree in mechanical engineering or a related field, at least 3 years of engineering testing experience, and SolidWorks design skills. Hands-on experience with instrumentation, DAQs, sensors and bench diagnostic tools is also required.

  SolidWorks, DAQ, oscilloscope, power analyzer, logic analyzer, multimeter

• 1 mois

  IT Desktop Engineer - Co-Op/Intern

  Ottawa, ON

  24–35 $/hTemps plein

  LO

  Lumentum Ottawa ULC

  Candidates need advanced Windows desktop skills and some experience with Windows Server, VMware and Microsoft 365 or Active Directory. They must be enrolled in a Canadian post-secondary program and communicate clearly in English.

  Windows Server, VMware, Microsoft 365, Active Directory, Microsoft Entra ID, Linux (RedHat/CentOS)

• 1 mois

  Junior Structured Cabling Technician

  Toronto, ON

  

  AmpThink: AmpThink is a Network Integration Company focused on the delivery of large, complex projects.

  AmpThink needs candidates with a high school diploma or equivalent, a basic understanding of structured cabling, and a valid driver's licence. Strong attention to detail, teamwork and the ability to lift heavy materials are required.

  Cat 5/6 cable, fiber optic cable

• 1 mois

  Analog/mixed-signal IC Developer - Acacia (Hybrid)

  Kanata, ON +1

  Temps plein

  

  Cisco

  8+ ansCandidates need a bachelor's with 8 years, a master's with 6, or a PhD with 3 years of related experience, plus hands-on design, simulation and measurement of high-speed ICs in at least three areas such as SerDes, PLLs, output drivers, clock distribution, amplifiers and equalization.

  Cadence Virtuoso, Spectre, Calibre, EMX, Matlab

  1 mois

  Senior Mixed-Signal Designer - Acacia (Hybrid)

  Kanata, ON

  Temps plein

  

  Cisco

  5+ ansCandidates need a degree plus 5 to 12 years of related experience, depending on the degree level, and experience designing, simulating and measuring high-speed ICs across at least three of: SerDes, output drivers, PLLs, clock distribution, op-amps/PGAs or equalization. Experience with FinFET, layout and design tools is preferred.

  Cadence Virtuoso, Spectre/APS/SpectreX, Calibre, EMX, Matlab

  1 mois

  Principal Analog/mixed-signal IC Developer - Acacia (Hybrid)

  Kanata, ON

  Temps plein

  

  Cisco

  7+ ansCandidates need a Bachelor's with 15 years, a Master's with 10 years, or a PhD with 7 years of related experience. They must have high-speed IC design experience in at least three areas and have led a high-performance circuit team.

  Cadence Virtuoso, Calibre, EMX, Matlab

  1 mois

  Senior Analog/mixed-signal IC Designer - Acacia (Hybrid)

  Kanata, ON

  Temps plein

  

  Cisco

  12+ ansCisco candidates need 12+ years of experience with a BSEE, 8+ with an MS, or 5+ with a PhD. Experience in high-speed IC design in at least three areas such as SerDes, PLLs, output drivers, equalization and amplifiers is required.

  Cadence Virtuoso, Spectre, Calibre, EMX, Matlab

  1 mois

  Senior Analog/mixed-signal IC Developer - Acacia - (Hybrid)

  Kanata, ON +1

  Temps plein

  

  Cisco

  12+ ansCandidates need a BSEE with 12+ years of experience, or an equivalent MS or PhD background, plus hands-on design, simulation and measurement of high-speed ICs in at least three areas such as serial links, PLLs, drivers and data converters. Experience with FinFET technology, high-speed layout and Cadence Virtuoso is a plus.

  Cadence Virtuoso, Spectre, SpectreX, APS, Matlab, EMX

• 1 mois

  R&D Integration, Testing and Prototyping Technician

  Montréal, QC

  Temps plein

  

  Thales

  3+ ansCertificat technique d'un collège ou CEGEP reconnu; 3 à 5 ans d'expérience en fabrication ou développement technique; Maîtrise de l'anglais et du français

  Microscope, Vernier, Oscilloscope, Multimètre, Tour, Fraiseuse

• 1 mois

  Mechanical Engineering Contractor

  Vancouver, BC

  Contrat

  

  MistyWest: A product development firm accelerating the world's transition to a more sustainable future.

  5+ ansCandidates need 5+ years of SolidWorks CAD experience, mechanical design skills across molded plastics, machining, 3D printing and sheet metal, and design for environmental requirements. They also need GD&T proficiency, DFM/DFA for 1000 units per year, and experience taking projects through NPI.

  SolidWorks, OnShape, NX

• 1 mois

  Verification and Validation Engineer

  Oakville, ON

  60k–75k $/anTemps plein

  

  VitalBio

  3+ ansCandidates need a Bachelor's or Master's degree in electrical, mechatronics or biomedical engineering, plus 3+ years of related experience. Hands-on work with test equipment and Python or Matlab programming is required, and experience in a regulated medical or aerospace industry is needed.

  oscilloscope, multimeter, signal generator, Python, Matlab, SolidWorks

  1 mois

  Senior Electrical Engineer

  Oakville, ON

  110k–140k $/anTemps plein

  

  VitalBio

  10+ ansCandidates need an electrical engineering degree with 10+ years of experience (or a master's with 8+ years), strong PCB design skills in Altium Designer, and knowledge of power, signal integrity and EMC. Hands-on experience bringing compliance-tested hardware to market is also required.

  Altium Designer, Oscilloscope, Function generator, DC power supply

• 1 mois

  Hardware Design Engineer

  Ottawa, ON

  Temps plein

  

  Work in Ottawa: Invest Ottawa is a non-profit, partnership organization that operates on an annual budget that comes from a variety of sources including: municipal,…

  5+ ansCandidates need a Bachelor's or Master's in Electrical Engineering or a related field and 5+ years of hardware design for optical or RF communication systems. Required skills include high-speed PCB design (Cadence preferred), lab equipment use, SerDes or PAM4 experience, and knowledge of thermal management and EMI/EMC compliance.

  Cadence, oscilloscope, VNA, spectrum analyzer

  1 mois

  Module NPI Test Lead

  Ottawa, ON

  Temps plein

  

  Work in Ottawa: Invest Ottawa is a non-profit, partnership organization that operates on an annual budget that comes from a variety of sources including: municipal,…

  Candidates need a PhD or MSc in Electrical or Optical Engineering or a related field, plus experience leading cross-functional hardware, test and firmware teams. They also need NPI experience ramping 400G or 800G modules to volume production, and a solid grasp of fiber optics and coherent technology.

  Work as a team, Regulatory compliance, Troubleshoot, Electrical engineering, Optical engineering, Firmware

• 1 mois

  Technicien De Service Extérieur/Field Service Technician (Montreal)

  Montréal, QC

  Temps plein

  

  BFG Enterprise Services

  3+ ansCertification A+ requise; Diplôme universitaire en TI ou programme afférent; 3 à 5 ans d'expérience en services extérieurs TI

  POS systems, Outlook, remote management software, drill, hand and power tools

  1 mois

  Field Service Technician (Winnipeg)

  Winnipeg, MB

  Temps plein

  

  BFG Enterprise Services

  3+ ansBFG Enterprise Services needs candidates with CompTIA A+ certification, a university degree in IT or a related field, and 3 to 5 years of IT field service experience. Retail POS experience, a valid class 5 licence with a clean abstract, and the ability to lift 75 lbs are required.

  POS systems, hand tools, power drill, remote management software, Outlook

13 entreprises