Emplois “Test rigs” au Canada – Page 14

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Vessel Operator, Adhoc

  Canada

  Sur placeTemps plein

  W

  Wood

  3+ ansCandidates need marine or offshore experience, ideally 3 to 5 years in petrochemicals, plus a Bridge Watch Certification and STCW Basic Safety. Crane, forklift and helicopter landing certificates, and fluent English, are also required.

  forklift, crane, Microsoft Excel, SAP, Oracle, Imperium

  1 mois

  Vessel Control Systems Operator / Control Room Operator

  St. John's, NL

  Sur placeTemps plein

  W

  Wood

  2+ ansCandidates need at least two years of tanker experience with offshore oil and gas exposure, plus a Chief Mate Unlimited certificate and a GMDSS Restricted Radio Telephone certificate. Strong verbal and written communication and the physical stamina for confined spaces, heights and frequent climbing are also required.

  FPSO control systems, thruster assisted positioning mooring system, GMDSS radio, inert gas system

  1 mois

  Radio Operator, Adhoc (Offshore)

  St. John's, NL

  Sur placeTemps plein

  W

  Wood

  Candidates need offshore radio operator experience, ideally in oil and gas, plus a GMDSS General Operators Certificate and aeronautical and marine weather observer certification. Strong written, oral and computer communication skills are expected, along with the offshore safety certifications and fitness to work at heights.

  GMDSS radio equipment, Satellite telecommunications equipment, ARPA radar, Computerized maintenance management system

• 1 mois

  Software Developer/Engineer - Digital Completion Solutions

  Edmonton, AB

  HybrideTemps plein

  N

  NOV

  5+ ansCandidates need five or more years of embedded firmware experience, strong C and C++ skills on microcontrollers, and knowledge of industrial communication protocols such as CAN bus and Modbus. A diploma or degree in a related engineering or computer discipline, or equivalent experience, is also required.

  Git

• 1 mois

  Spécialiste ingénierie en cybersécurité

  Montréal, QC

  Temps plein

  

  SOGECLAIR

  6+ ansDiplôme universitaire en génie logiciel, TI, informatique, électronique ou aérospatial; Six ans d'expérience technique, dont deux en cybersécurité et deux en aéronautique; Connaissances des normes DO-326B, DO-356A, DO-35

  Cybersecurity, LES, Penetration testing, Regulatory compliance, Customer service, Computer science

  1 mois

  Ingénieur(e) hydromécanique

  Montréal, QC

  Temps plein

  

  SOGECLAIR

  7+ ansBaccalauréat ou maîtrise en génie mécanique ou aéronautique; 7 à 10 ans d'expérience pertinente; Expérience en conception et certification de systèmes hydromécaniques

  CATIA, Matlab, Simulink, MS Office

  1 mois

  Air Systems/Pneumatics Engineer

  Montréal, QC +1

  Temps plein

  

  SOGECLAIR

  5+ ansCandidates need a bachelor's or master's in mechanical or aerospace engineering and 5 to 8 years of aerospace experience. They must know fluid flow, thermodynamics, pneumatics and certification standards, and be fluent in French and English.

  MS Office, Model Based Engineering tools, Simulation software

• 1 mois

  REMOTE Role Flight Control Laws (CLaws) Expert

  Télétravail au Canada

  Télétravail

  

  Sapsol Technologies Inc: A Process-Centric AI & Quantum company

  10+ ansSapsol Technologies needs candidates with at least 10 years of fly-by-wire control law development experience. Candidates need aircraft flight dynamics and handling-qualities expertise, MATLAB/Simulink and C++ skills, and knowledge of DO-178B and SAE ARP4754.

  MATLAB, Simulink, C++

  1 mois

  Human Factors And Ergonomics

  Télétravail au Canada

  TélétravailContrat

  

  Sapsol Technologies Inc: A Process-Centric AI & Quantum company

  Candidates need a degree in engineering, science, industrial design or ergonomics, hands-on human factors and ergonomics experience, and 3D modeling skills in CATIA, NX, Jack or Rhinoceros. They also need knowledge of aircraft systems and aerospace regulations, plus strong English communication.

  CATIA, Siemens NX, Jack, Rhinoceros

  1 mois

  Flight Controls Engineer

  Télétravail au Canada

  TélétravailContrat

  

  Sapsol Technologies Inc: A Process-Centric AI & Quantum company

  10+ ansCandidates need a bachelor's or master's in Aerospace Engineering (PhD preferred), at least 10 years of fly-by-wire control law experience, and strong knowledge of flight dynamics and control design. They must be fluent in French and English.

  MATLAB, Simulink, C++

  1 mois

  Flight Control Laws Expert

  Montréal, QC

  

  Sapsol Technologies Inc: A Process-Centric AI & Quantum company

  10+ ansCandidates need a Master's or PhD in Aerospace Engineering and at least 10 years of flight control law experience on fly-by-wire aircraft. They must have expert knowledge of flight dynamics, state estimation, and SISO/MIMO control design, plus MATLAB, Simulink, and C++ skills.

  MATLAB, Simulink, C++

  1 mois

  Flight Control Laws Design

  Télétravail au Canada

  TélétravailContrat

  

  Sapsol Technologies Inc: A Process-Centric AI & Quantum company

  10+ ansCandidates need 10+ years of flight control law development for fly-by-wire aircraft, a degree in aerospace engineering (PhD preferred), and strong knowledge of flight dynamics and control design. Fluency in French and English and familiarity with DO-178B and SAE ARP4754 are also required.

  MATLAB, Simulink, C++

  1 mois

  Flight Control Engineer

  Toronto, ON +1

  Contrat

  

  Sapsol Technologies Inc: A Process-Centric AI & Quantum company

  10+ ansCandidates need at least 10 years of experience developing fly-by-wire flight control laws, a degree in aerospace engineering (PhD preferred), and strong knowledge of flight dynamics, control systems and DO-178B certification. Proficiency in MATLAB/Simulink and C++ is required, along with fluency in French and English.

  MATLAB, Simulink, C++

• 1 mois

  Structural Engineer

  Paradise, NL

  

  DOF

  3+ ansCandidates need a bachelor's degree in an engineering field and a professional engineering licence. They also need 3 to 5 years of marine structural design and lift planning experience, and must be willing to travel and work offshore.

  Ansys, Orcaflex, Microsoft Office

• 1 mois

  Well Testing Operators - 1 to 5 Years Experience

  Grande Prairie, AB

  

  Roska DBO

  1+ ansCandidates need one to five years of well testing or production testing experience, strong mechanical aptitude, and a Class 5 driver's licence with a clean abstract. They must pass drug and alcohol screening and be willing to work 21-days-on, 7-days-off away from home.

  surface test equipment, instrumentation, control systems, P&IDs, well testing software, MS Office

• 1 mois

  Sprinkler Fitter - Industrial

  Alberta

  Temps plein

  R

  Rotaflow

  3+ ansCandidates need a Red Seal Journeyman Sprinkler Fitter certification and 3+ years of industry experience. Experience with fire pumps, standpipes, hydrants and wet and dry pre-action systems is required, along with knowledge of NFPA 25 and valid safety certifications.

  fire pumps, standpipes, PIVs, hydrants, backflow preventers, monitors

• 1 mois

  Technical Researcher / Writer

  Télétravail au Canada

  TélétravailTemps plein

  

  SearchApi

  Candidates need near-native English, a long-form technical piece they wrote plus the code or data behind a benchmark in it, and comfort coding tests and working with APIs and spreadsheets. Familiarity with the no-code and agent ecosystem is a plus.

  Spreadsheets, n8n, MCP, OpenClaw, Hermes

• 1 mois

  Aerospace Systems Engineer – Fly-By-Wire, Flight Controls & System Integration

  Montréal, QC

  AN

  Astra North Infoteck Inc.

  7+ ansCandidates need 7+ years of aerospace engineering experience, preferably with flight controls, and hands-on work with ARP4754, Part 25 certification and requirements management. They also need strong troubleshooting and root cause analysis skills and experience with rig and aircraft testing.

  MATLAB, Simulink, Stateflow, DOORS, CATIA, ADAMS

• 1 mois

  Fitter – Pressure Vessels

  Cambridge, ON

  30–36 $/hTemps plein

  

  Randstad Canada

  3+ ansCandidates need at least three years of custom fabrication experience, mostly in a fitting role for Fitters or in welding for Welders. They must read complex blueprints and welding symbols, hold a high school diploma or technical post-secondary education, and CWB or TSSA tickets are a significant asset.

  MIG welding, TIG welding, Welding

  1 mois

  B-Pressure Welder - TIG

  Calgary, AB

  Temps plein

  

  Randstad Canada

  5+ ansCandidates need a valid Alberta Journeyman Welding Certificate and a valid B-Pressure Welding Certificate, plus strong TIG skills, with ambidextrous TIG preferred. Five or more years of pressure piping welding is highly preferred, and candidates must pass a practical shop weld test.

  overhead crane, forklift, manlift, rigging tools

• 1 mois

  Equipment Maintenance/Operator

  Ottawa, ON

  Temps plein

  

  Morguard: Morguard is a fully integrated real estate company.

  3+ ansCandidates need 3 to 5 years of experience maintaining commercial, industrial or institutional mechanical systems, with strong troubleshooting on rotating equipment and the ability to read blueprints and O&M manuals. They must hold a valid driver's licence, lift up to 50 lbs, work at heights, and respond to after-hours emergencies.

  Forklift, Aerial lift, Rigging equipment, Fall protection equipment

• 1 mois

  Repair Assessment Technician - Etobicoke ON

  Burlington, ON

  Temps plein

  GC

  GEA Canada Inc.

  3+ ansCandidates need mechanical training or equivalent vocational qualification and 3 to 5 years of inspection, maintenance or repair experience on industrial machinery. Precision measuring skills, drawing interpretation and dye penetrant testing experience are strongly preferred.

  micrometers, calipers, bore gauges, depth gauges, dial indicators, cranes

• 1 mois

  Tig B-Pressure Welder - Woodfibre

  Squamish, BC

  

  Craft Recruiting

  5+ ansCandidates need a Red Seal welding ticket or equivalent, a valid BC Class A Pressure Welder certification (or willingness to obtain it), and 5+ years of TIG and stick welding experience. They must pass company weld tests and a drug, alcohol and 50 lb fitness test.

  TIG (GTAW), SMAW, RMD, FCAW

• 1 mois

  Chemical Technologist

  Chalk River, ON

  Temps plein

  

  Canadian Nuclear Laboratories LTD

  3+ ansCandidates need a high school diploma with more than 3 years of relevant experience, or a technology diploma in chemistry, chemical technology, physics or engineering. Experience in chemical lab practices and safety, Reliability Status security clearance, and strong technical writing skills are required.

  Research, Reporting, Laboratory equipment, Quality assurance, Housekeeping, Communication skills

14 entreprises