Emplois “SAW system” au Canada – Page 15

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Construction Technician

  Saint John, NB +2

  Temps plein

  EW

  Enterprise Wide

  3+ ansCandidates need a high school diploma, at least three years of construction project experience, a valid Class 5 driver's licence with a clean record, and physical fitness to lift up to 60 lbs. A tank installer licence is an asset.

  quick-cut saw, jackhammer, air compressor, towing trailer

  1 mois

  Construction Technician

  Winnipeg, MB

  Temps plein

  EW

  Enterprise Wide

  3+ ansCandidates need a high school diploma, at least 3 years of construction project experience, and a valid Class 5 driver's licence with a clean record. They must be physically fit, able to lift 60 lbs, and willing to travel and work on call and overtime.

  quick-cut saw, jackhammer, air compressor, towing trailer

  1 mois

  Construction Technician

  Saint John, NB +2

  Temps plein

  EW

  Enterprise Wide

  3+ ansCandidates need a high school diploma, at least three years of construction project experience, and a valid Class 5 driver's licence with a clean record. A tank installer certification is an asset, and candidates must be able to lift at least 60 lbs.

  quick-cut saw, jackhammer, air compressor, towing trailer

• 1 mois

  Industrial Welding Instructor

  Stratford, ON

  75k–90k $/anTemps plein

  C

  Cleaver-Brooks: Cleaver-Brooks, Inc., a manufacturer of boiler room products for over 90 years, is the only single source manufacturer and supplier of boiler room…

  Cleaver-Brooks needs a candidate with proven experience training, mentoring and evaluating welders, plus strong knowledge of ASME Sections I, IV, VIII and IX. A Certified Welder qualification under ASME Section IX is required, with a Red Seal or welding inspection certification as assets.

  Microsoft Office, training database systems, automated welding systems, hand tools, power tools

• 1 mois

  Assembler

  Maple Ridge, BC

  Sur placeTemps plein

  EC

  EMCO Corporation

  Candidates need a Grade 12 diploma or equivalent and experience in assembly or basic plumbing and mechanical work. They must be able to stand for 8 hours a day, lift up to 60 lbs, read blueprints and do intermediate math.

  forklift, lathe, bandsaw, circular saw, drill press, power tools

• 1 mois

  Manager, Business Systems & Innovation

  Langley, BC

  Sur placeTemps plein

  

  Hall Group of Companies

  6+ ansCandidates need 6 to 10 years of progressive experience in business systems, data, project controls or digital transformation, ideally in construction or project-based operations. Strong communication, documentation and project coordination skills are essential, and ERP, Power BI or automation experience is an asset.

  ERP, HRIS, LMS, Power BI, project management systems, field systems

  1 mois

  Procurement Manager

  Langley, BC

  Sur placeTemps plein

  

  Hall Group of Companies

  5+ ans2+ gestionCandidates need 5-7 years of procurement experience in construction and 2+ years in management. They also need a business or supply chain education, advanced Excel and ERP skills, and a valid BC Class 5 driver's licence.

  Acumatica, Excel, Word, PowerPoint, Teams, SharePoint

  1 mois

  Project Manager

  Langley, BC

  Sur placeTemps plein

  

  Hall Group of Companies

  5+ ansCandidates need 5 to 8+ years of progressive project management experience, excellent English communication and eligibility to work in Canada. A bachelor's degree is preferred, and construction experience is an asset.

  HCSS, MS Project, Excel, Word, MS Teams

  1 mois

  Project Coordinator

  Langley, BC

  Sur placeTemps plein

  

  Hall Group of Companies

  1+ ansCandidates need at least one year of experience, a Bachelor of Engineering is preferred, and an EIT working toward PEng is an asset. They must be fluent in English, proficient in Excel, Word and MS Teams, and skilled with HCSS and MS Project.

  HCSS, MS Project, Excel, Word, MS Teams

• 1 mois

  Warehouse Framer / Drywaller

  Surrey, BC

  Sur placeTemps plein

  

  RWC Systems

  RWC Systems needs candidates with prior framing, drywall, carpentry or general construction experience, and the ability to read drawings and use measuring tools accurately. Candidates must use hand and power tools safely, communicate in English, and wear CSA approved steel-toed boots.

  impact drill, screw gun, power saw, measuring tools, tablet, forklift

• 1 mois

  Production Worker

  North Vancouver, BC

  Sur placeTemps plein

  

  Two Rivers Specialty Meats

  Two Rivers Specialty Meats needs workers who know basic food safety, can lift at least 50 lbs, and can run production equipment safely. Candidates need an interest in working with meat and reliable transportation to arrive before bus service starts.

  burger-making equipment, meat cutting equipment, production machinery, washdown equipment

• 1 mois

  Carpenter

  Calgary, AB

  Sur placeTemps plein

  

  ITC Construction

  3+ ansCandidates need 3+ years of residential construction experience, a Red Seal ticket, and knowledge of construction standards and quality control. They must be able to lift up to 50 lbs, use hand tools and equipment safely, and work well with multiple trades.

  chisels, planes, saws, drills, sanders, levels

• 1 mois

  Job ID #32207: Truck and Coach Technician

  Hamilton, ON

  40,71–45,23 $/hSur placeTemps plein

  

  City of Hamilton

  Candidates need a valid Ontario Truck and Coach Technician Licence (310T) and a valid Class G driver's licence. Experience with heavy diesel repair, diagnostics and manufacturer software is needed, and the ability to work with little supervision, use heavy tools outdoors, and work evenings, nights and weekends.

  Cummins Insite, Allison DOC, Meritor, Bendix, Voith, Vansco

• 1 mois

  Senior Field Electronics Technician

  Collingwood, ON

  Sur placeTemps plein

  

  Impossible Metals

  5+ ansCandidates need a degree or diploma in marine, electronics or engineering technology and at least 5 years of marine technology experience with subsea robotics. They need a safety-first mindset, strong troubleshooting and communication skills, and the ability to obtain offshore safety certifications.

  oscilloscope, multimeter, soldering station, crimper, wire stripper, impact driver

• 1 mois

  Field Service Consultant Edmonton

  Edmonton, AB

  Sur placeTemps plein

  EI

  ESW IT Business Advisors

  3+ ansCandidates need a computer-related post-secondary diploma and at least 3 years in technical support, or an equivalent mix of education and experience. Strong knowledge of Windows, Office 365, networking, mobile devices and remote access tools such as Citrix, RSA and VPN is needed, along with the ability to lift 70 lbs and travel.

  Citrix, RSA, VPN, ticketing software, security cameras, wireless radio equipment

• 1 mois

  Cabinet Maker/Installer

  Sherwood Park, AB

  Sur placeTemps plein

  

  Salvi Homes

  3+ ansSalvi Group needs at least 3 years of similar experience and 2 years installing residential cabinets and millwork. Candidates need a Class 5 licence with a clean abstract, a current Criminal Record Check, the ability to read installation drawings, and mechanical knowledge of tools and machines.

  CNC nesting machine, doweling machine, case clamps, sliding table saw, jointer, planer

• 1 mois

  Logistics Supervisor

  Ancaster, ON

  Sur placeTemps plein

  

  Archmill House

  3+ ansArchmill House needs candidates with 3+ years in logistics, supply chain or warehouse management, including dispatcher experience and supervisory experience. A valid forklift licence and reach/counterbalance forklift experience are required, along with knowledge of transportation regulations and millwork materials.

  Seradex Millwork Module, Microsoft Dynamics 365 Business Central, Microsoft Office, forklift, reach truck, scissor lift

• 1 mois

  Landscape Technician

  Richmond, BC

  Sur placeTemps plein

  

  Isidore landscapes Inc.

  1+ ansCandidates need at least one year of hardscape or related landscaping experience, the legal right to work in Canada, and the physical fitness to lift 40 to 80 pounds regularly. Strong English communication, teamwork and a willingness to travel to work sites are also required.

  cut-off saw, compactor, excavator, skid steer, power tools, company vehicle

• 1 mois

  Landscape Construction Worker

  Vancouver, BC

  23–30 $/hSur placeTemps plein

  

  Fossil Landscape Construction

  Candidates need to be comfortable with hard outdoor physical work in all seasons and able to use hand and power tools. Landscaping, horticulture or construction experience is an asset, as are the ability to read measurements and two references from previous roles.

  skid steer, mini excavator, laser level, spirit level, stringline, shovel

• 1 mois

  Future Opportunities For Millwrights

  London, ON

  43,50 $/hTemps plein

  LB

  Labatt Brewing Company Limited

  1+ ansCandidates need a Journeyman Industrial Mechanic Millwright certification (433A Red Seal) and at least one year of millwright experience, with three years preferred. Experience repairing conveying systems, welding to high standards and strong troubleshooting skills are also needed.

  SAP, lathe, mill, saw, grinder, press

• 1 mois

  Production Worker

  Edmonton, AB

  Temps plein

  IP

  Interpro Pipe & Steel Inc.

  Candidates need Grade 12 or equivalent education, be able to lift up to 50 lbs, and have basic math skills. Experience operating equipment, mechanical aptitude, and computer proficiency with Microsoft Office are preferred.

  forklift, saw, paint line equipment

• 1 mois

  Machinist

  Penetanguishene, ON

  Temps plein

  

  Techform, a Division of Magna Closures Inc.

  Candidates need a grade 12 diploma, post-secondary education with full general machinist certification and apprenticeship, and the ability to create and interpret prints. CNC knowledge is required and CAD/CAM knowledge is an asset.

  Milling machine, Drill press, Grinder, Band saw, Cut-off saw, Lathe

  1 mois

  Tool & Die Maker (Certified)

  Penetanguishene, ON

  Temps plein

  

  Techform, a Division of Magna Closures Inc.

  Techform needs a certified Tool & Die Maker with a grade 12 diploma and completed apprenticeship. Candidates must read and create prints, know CNC principles, communicate well, and work with little supervision.

  Milling machines, Drill presses, Grinders, Band saws, Cut-off saws, Lathes

• 1 mois

  Warehouse Associate

  Leduc, AB

  22,50–28,90 $/hTemps plein

  MC

  Marmon/Keystone Canada Inc.

  2+ ansCandidates need a high school diploma and at least 2 years of warehouse, manufacturing or distribution experience, ideally in metals or industrial settings. Forklift and overhead crane experience, basic computer skills and strong safety awareness are required.

  forklift, overhead crane, band saw, cold saw, ERP system, MS Excel

18 entreprises