Emplois “Flight Manual” au Canada – Page 16

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Alpha Jet Pilot

  Canada

  Temps plein

  

  Top Aces (TAI): Top Aces provides advanced adversary air (ADAIR) and joint terminal attack controller (JTAC) technology and training to the world’s leading armed…

  3+ ansCandidates need an Airline Transport or Commercial Pilot licence, an instrument rating, a valid category 1 medical, and at least 2,000 hours as pilot-in-command in fighter aircraft. Operational experience, English communication and a Level II clearance are also required.

  Alpha Jet, towed target system

  1 mois

  Aircraft Engine Technician

  La Baie, QC

  Temps plein

  

  Top Aces (TAI): Top Aces provides advanced adversary air (ADAIR) and joint terminal attack controller (JTAC) technology and training to the world’s leading armed…

  Candidates need a professional aeronautics diploma or proven similar experience, with mechanics or aircraft engine maintenance experience preferred. They must read manuals in English, speak French, pass Controlled Goods and Secret clearances and work flexible shifts.

  Inspection, Troubleshooting, Painting, Order supplies, Quality assurance procedures, Work independently

  1 mois

  Technical Standards and Training Instructor

  La Baie, QC

  Temps plein

  

  Top Aces (TAI): Top Aces provides advanced adversary air (ADAIR) and joint terminal attack controller (JTAC) technology and training to the world’s leading armed…

  8+ ansCandidates need at least 8 years of experience with Top Aces, knowledge of aircraft maintenance software and manuals, and strong communication skills. Controlled Goods and Level 2 Secret clearances are required, and an AME licence and flight line experience are assets.

  RAMCO, SharePoint, Absorb, Microsoft Office, ground support equipment

  1 mois

  Aircraft Maintenance Technician

  Goffs, NS

  Temps plein

  

  Top Aces (TAI): Top Aces provides advanced adversary air (ADAIR) and joint terminal attack controller (JTAC) technology and training to the world’s leading armed…

  Candidates need a Transport Canada accepted aircraft maintenance course or accredited equivalent, and can work independently with strong troubleshooting and problem-solving skills. Commercial or military aircraft experience and Line Maintenance experience are assets, and a Level II security clearance is required.

  aircraft maintenance tools

  1 mois

  Lead AI and Automation

  Dorval, QC

  Temps plein

  

  Top Aces (TAI): Top Aces provides advanced adversary air (ADAIR) and joint terminal attack controller (JTAC) technology and training to the world’s leading armed…

  8+ ansCandidates need experience leading AI, automation or digital transformation programs, with knowledge of enterprise architecture, data governance and security. Strong judgment on responsible AI, regulated environments and stakeholder change management is expected.

  Ramco MRO, ERP systems

  1 mois

  Technical Publications Author

  Dorval, QC

  Temps plein

  

  Top Aces (TAI): Top Aces provides advanced adversary air (ADAIR) and joint terminal attack controller (JTAC) technology and training to the world’s leading armed…

  Candidates need broad knowledge of technical manual structure, including ATA and WUC organization, IPB/IPC and aircraft maintenance manuals, plus aircraft configuration management and airworthiness concepts. Strong Microsoft Office and document production skills, attention to detail, and fluent English are required; French or German is an asset.

  Microsoft Word, Microsoft Office, Adobe, SharePoint

• 1 mois

  Aviation Maintenance Analyst II

  Montréal, QC

  Temps plein

  DB

  Default Brand

  2+ ansCandidates need 2+ years in aviation maintenance, manufacturing or a related technical field, plus a BS or equivalent and an A&P licence or equivalent. They must read technical manuals and regulations, manage several projects at once, and communicate clearly with customers and colleagues.

  CAMP maintenance tracking application

• 1 mois

  Optometrist (Full-Time) – FYidoctors – Fort McMurray, AB

  Fort McMurray, AB

  Temps plein

  

  solis optics

  Candidates need to be licensed optometrists who can work with modern eye-testing technology and build patient care in a collaborative team.

  Optomap, Corneal Topographer, Visual Field (Matrix), Autorefractor, Manual and Automated Lensometers, iLux

• 1 mois

  Part Time T56 Engine Mechanic (Comox, BC) - Temporary

  Winnipeg, MB

  Temps partiel

  

  StandardAero

  Candidates need previous aircraft mechanic experience in an aerospace setting and T56 turboprop engine experience. Lifting up to 50 pounds and standing for long periods are required, and a licence or aviation training such as AME, CAMC, A&P or AMT is desirable.

  hand tools, power tools, precision measuring equipment, production management computer system

  1 mois

  Manual Machinist (SACS)

  Winnipeg, MB

  Temps plein

  

  StandardAero

  5+ ansCandidates need at least Level 3 machining from an apprenticeship or equivalent training, plus 5 or more years of manual machining experience. They must read blueprints well, use precision measuring tools, solve problems mathematically, lift up to 50 pounds and stand for long periods.

  lathe, calipers, micrometers, gauges, hand tools

  1 mois

  Manual Machinist

  Winnipeg, MB

  Temps plein

  

  StandardAero

  2+ ansCandidates need at least two years of hands-on manual machining experience, strong mechanical aptitude and precision, and skill reading blueprints and using measuring tools. They must be able to lift 50 pounds and stand for long periods.

  calipers, micrometers, gauges, conventional machines, hand tools

  1 mois

  CNC Machinist

  Winnipeg, MB

  Temps plein

  

  StandardAero

  2+ ansCandidates need 2+ years of CNC experience or a machinist apprenticeship, plus permanent full-time work authorization in Canada. Strong blueprint reading, precision measuring skills and the ability to lift 50 pounds are required.

  calipers, micrometers, gauges, hand tools, production management computer systems

• 1 mois

  Driller’s Helper - Canadian Citizens and Residents Only

  Canada

  Temps plein

  

  Hy-Tech Drilling

  Candidates need to be Canadian citizens or residents legally authorized to work in Canada, with a valid Canadian driver's licence and the ability to pass a physical demands assessment. Experience is an asset but formal training is not required, and a mechanical mindset and strong work ethic are key.

  drill rods, hydraulic systems, supply pumps, drilling rigs

• 1 mois

  Mechanic (Heavy Duty Equipment) - Voisey's Bay

  Newfoundland and Labrador

  Sur placeTemps plein

  

  The Redpath Group: Established in 1962, The Redpath Group is an experienced, full-service solutions provider to the global underground mining industry.

  3+ ansCandidates need at least 3 years as a mechanic in mining, construction or a similar industry, or a journeyperson certificate. They must read schematics and service manuals and diagnose diesel engines and powertrain and brake systems.

  Engine/powertrain diagnostic software, Handheld diagnostic tools, Parts and service manuals

  1 mois

  Mechanic - Musselwhite

  Thunder Bay, ON

  138k–157k $/anSur placeTemps plein

  

  The Redpath Group: Established in 1962, The Redpath Group is an experienced, full-service solutions provider to the global underground mining industry.

  5+ ansCandidates need a journeyperson certificate or five years as a mechanic in mining, construction or similar industry. They must read schematics and manuals, diagnose diesel and powertrain systems, and show basic literacy and strong leadership skills.

  Engine diagnostic software, Hydraulic systems, Electrical schematics, Parts and service manuals, Drills, Compressors

• 1 mois

  Commissioning Technician - HVAC

  Fort MacKay, AB

  Temps plein

  K

  Kent

  5+ ansCandidates need a recognized HVAC trade qualification in Alberta (Red Seal preferred), 5+ years of HVAC commissioning or construction experience on industrial projects, and refrigerant handling certification. Strong troubleshooting, test and balance knowledge, safety discipline and clear English communication are required.

  HVAC test instruments, SCDB, Building automation systems, Test and balance equipment

• 1 mois

  Captain (PIC) Falcon 7X

  Richmond, BC

  Sur placeTemps plein

  

  Anderson Air: Anderson Air, a family-owned and operated business since 1980 is the longest established Aircraft Management and Executive Charter company in B.C.

  Candidates need 5000 total flight hours, 1000 PIC hours and 1000 jet PIC hours, a Transport Canada ATPL, large aircraft and corporate aviation experience, and the ability to travel outside Canada and work in Canada.

  1 mois

  First Officer (SIC) Falcon 7X

  Richmond, BC

  Sur placeTemps plein

  

  Anderson Air: Anderson Air, a family-owned and operated business since 1980 is the longest established Aircraft Management and Executive Charter company in B.C.

  Candidates need at least 2500 total flight hours, 100 jet hours and 500 multi-turbine hours, plus a Transport Canada ATPL. Medium to large aircraft and corporate aviation experience are required, along with the ability to work in Canada and travel outside it.

• 1 mois

  Storekeeper

  Squamish, BC

  Sur placeTemps plein

  

  Bridgemans Services

  Bridgemans Services needs candidates who can lift up to 25 kg and handle pallets and heavy cases all day. Candidates should have attention to detail, basic food safety knowledge, and strong records and communication skills; food service or warehouse experience and WHMIS are preferred.

  pallet jack, hand truck, carts, dollies, inventory system

  1 mois

  Project Administrator

  Vancouver, BC

  Sur placeTemps plein

  

  Bridgemans Services

  2+ ansBridgemans Services needs candidates with at least 2 years of administration experience in the maritime sector and a high school diploma. Post-secondary education in administration, management or business is an asset.

  Gather data, Logistics

• 1 mois

  Flight Test Engineer Instructors - Rotary Wing & Fixed Wing

  London, ON

  120k–155k $/anSur placeTemps plein

  IC

  ITPS (Canada) LTD

  5+ ansCandidates need a bachelor's degree in aerospace, mechanical or a related engineering field, plus a graduate flight test engineer course and 5+ years of flight test program experience. A master's or doctorate may be required.

  Coaching, Teaching, Reporting, Research, Aerospace engineering, Mechanical engineering

• 1 mois

  Project Manager II, Shoring and Foundations (NOC 70010)

  Edmonton, AB

  128k $/anSur placeTemps plein

  

  Hall Group of Companies

  3+ ansCandidates need a bachelor's degree in civil, geotechnical or geophysical engineering and at least 3 years of progressive civil construction project management, including piling and foundations work with CFA methods. They must show skill with HCSS, Microsoft Office and Project, cost reporting, subcontract negotiation and quality turnover packages.

  HCSS, Microsoft Project, Microsoft Excel, Microsoft Word, Microsoft Teams

  1 mois

  Project Manager I, Shoring and Foundations (NOC 70010)

  Edmonton, AB

  150k $/anSur placeTemps plein

  

  Hall Group of Companies

  5+ ans5+ gestionCandidates need a Bachelor's degree in civil, geotechnical or geophysical engineering, at least five years of senior civil construction project management, and five years of piling and foundations experience, including CFA methods. Strong skills in HCSS, Microsoft Office, cost reporting, procurement, and contract administration are also required.

  HCSS, Microsoft Project, Microsoft Excel, Microsoft Word, Microsoft Teams

• 1 mois

  Class 1 Driver/Operator, Pressure & Vacuum

  Bonnyville, AB

  Sur placeTemps plein

  

  CEDA

  1+ ansCandidates need a Class 1 licence, comfort with a manual transmission, and CSO and H2S Alive certifications by the time of offer. One or more years of pressure and vacuum experience in an industrial setting is preferred, along with a clean driving abstract and a negative drug and alcohol test.

  pressure truck, vacuum truck, semi-vac, super B, tri-quad, combo truck

12 entreprises