Emplois “Oscilloscopes” au Canada – Page 17

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Lab Support Analyst, Intermediate

  Toronto, ON

  Sur placeTemps plein

  HR

  Hitachi Rail Canada Inc.

  1+ ansHitachi Rail needs candidates with an electronics or electrical engineering diploma or degree and at least one year of hands-on electronics experience. Candidates must read circuit and wiring diagrams, use test equipment, and understand networks, TCP/IP and serial communications.

  oscilloscope, multimeter, protocol analyzer, spectrum analyzer, Windows, Linux

  1 mois

  Hardware Electrical Designer, Senior

  Toronto, ON

  HybrideTemps plein

  HR

  Hitachi Rail Canada Inc.

  6+ ansCandidates need 6+ years of industry experience in electrical design, including cabling, grounding and surge protection. They also need strong electrical engineering skills in power, electronic and telecom circuits, a bachelor's degree or equivalent, and proficiency with AutoCAD and test instruments.

  AutoCAD, Oscilloscope, Protocol analyzer

• 1 mois

  Telecommunications Solution Architect

  Toronto, ON

  Temps plein

  HR

  HITACHI RAIL STS CANADA, INC.

  8+ ansCandidates need at least 8 to 10 years of telecom engineering experience, with strong knowledge of wired and wireless network design and switching and routing protocols. A CCNP or equivalent certification is required, and an engineering or IT degree is expected.

  oscilloscope, spectrum analyzer

• 1 mois

  Sr. Electronics Engineer

  Saskatchewan

  Temps plein

  SE

  Startco Engineering ULC

  7+ ansCandidates need a bachelor's degree in an electrical or electronics field and at least 7 years of electronics design experience. They must know circuit design, schematic and PCB tools, and lab equipment such as oscilloscopes.

  Altium, Oscilloscope, Logic analyzer, SPICE, Python

• 1 mois

  Towed Array Technician

  Dartmouth, NS

  Temps plein

  UE

  Ultra Electronics Maritime Systems Inc (Canadian Federal)

  Candidates need a Grade 12 education with a community college technician or technologist qualification, or equivalent experience, and must be able to get Canadian government security clearance. Strong attention to detail, soldering to industry standards, and the ability to work from verbal instructions and drawings are needed.

  Oscilloscope, Test equipment, Environmental chambers, Hand power tools, Overhead cranes, Winches

• 1 mois

  Test Specialist - PCL

  Calgary, AB

  Temps plein

  CC

  (CAN) CoolIT Systems Inc.

  3+ ansCandidates need a Bachelor's degree in Mechanical Engineering or a related field, at least 3 years of testing experience, and SolidWorks and instrumentation skills. Experience with DAQ systems and electromechanical testing is also required.

  SolidWorks, DAQ, oscilloscope, power analyzer, logic analyzer, multimeter

  1 mois

  Test Technologist

  Calgary, AB

  Temps plein

  CC

  (CAN) CoolIT Systems Inc.

  CoolIT needs candidates with a diploma or degree in electrical, electronics, mechanical or a related field, plus hands-on experience with instrumentation and bench test tools. Strong data analysis, root cause analysis and programming skills in Python or C/C++ are also required.

  Oscilloscope, Power analyzer, Logic analyzer, Multimeter, DAQ, SolidWorks

• 1 mois

  Associate Analog Design Engineer

  Ottawa, ON

  Temps plein

  S

  Semtech_Canada_Corporation

  Candidates need a BASc in Electrical or Computer Engineering with significant IC design content, and experience in high-speed CMOS or BiCMOS design. Strong problem-solving, communication and analog circuit knowledge are also required.

  Cadence Virtuoso, Matlab, Spectrum analyzer, Network analyzer, Oscilloscope, Python

  1 mois

  Principal Product Definition Engineer

  Burlington, ON

  Temps plein

  S

  Semtech_Canada_Corporation

  8+ ansCandidates need at least 8 years of hands-on engineering experience in high-speed analog or mixed-signal design, optical components, or networking. They need deep knowledge of signal integrity, optical link budgets, and coherent or direct-detect optical transmission, plus strong communication skills and the ability to work across global teams.

  ADS, HFSS, Matlab, spectrum analyzer, vector network analyzer, optical power meter

  1 mois

  Applications Engineering Intern

  Burlington, ON

  26–28,50 $/hTemps plein

  S

  Semtech_Canada_Corporation

  Candidates need a self-motivated, independent working style, solid analogue and digital circuit knowledge, and PCB troubleshooting experience (preferred). Soldering skill, CAD tool familiarity, strong organization, and clear written and spoken communication are also needed.

  BERT, VNA, WFM, oscilloscope, SAP, CAD tools

  1 mois

  Applications Engineering Intern

  Burlington, ON

  Temps plein

  S

  Semtech_Canada_Corporation

  Semtech Canada Corporation needs candidates who can work independently, understand analogue and digital circuits, and solder. Troubleshooting PCBs, CAD tools and strong communication and organization skills are also needed.

  BERT, VNA, oscilloscope, SAP, CAD tools, soldering equipment

• 1 mois

  Technicien Électronique Senior / Senior Electronics Technician

  Montréal, QC

  HybrideTemps plein

  

  EXFO Inc.

  8+ ansDEC en électronique ou équivalent; 8 ans et plus d'expérience en R&D (conception et validation); Maîtrise des signaux hautes vitesses jusqu'à 448 Gbps

  Oscilloscope, Analyseur de spectre, VNA, Siemens/Mentor Graphics

  1 mois

  Electro-Optical Assembly Technician

  Québec, QC

  Sur placeTemps plein

  

  EXFO Inc.

  2+ ansDEP, AEC ou DEC en électronique ou formation pertinente; Deux ans d'expérience pertinente; Maîtrise de l'électronique et de l'optique

  oscilloscope, équipements de mesure, schémas électroniques, schémas optiques, Windows, MS Office

  1 mois

  Electro-Optical Assembly Technician

  Québec, QC

  Sur placeTemps plein

  

  EXFO Inc.

  2+ ansDEP, AEC ou DEC en électronique ou formation pertinente; 2 ans d'expérience pertinente; Très bonne connaissance de l'électronique

  oscilloscope, Windows, MS Office

• 1 mois

  Firmware Development Engineer

  Ottawa, ON

  Temps plein

  VS

  Viavi Solutions Canada ULC

  7+ ansCandidates need 7+ years of embedded firmware experience, strong C and C++ skills for bare-metal and Linux systems, and experience with ARM or DSP processors. Experience with FPGA interfacing, serial protocols, embedded Linux and debugging tools is also required.

  JTAG, oscilloscope, logic analyzer, Git, Verilog, Xilinx Zynq

• 1 mois

  Staff Embedded Software Developer

  Vancouver, BC

  Temps plein

  C

  Canada

  10+ ansAnalog Devices needs candidates with a Bachelor's or Master's in electrical or computer engineering, 10+ years of embedded software experience, and strong C/C++ skills. Experience with RTOS or Linux kernels, Zephyr OS, and ARM or RISC-V hardware is required.

  Zephyr OS, JTAG, Oscilloscope, Logic analyzer, Git, Jenkins

  1 mois

  Analog Design Engineering Intern

  Toronto, ON

  C

  Canada

  Candidates need a current Bachelor's or Master's pursuit in electrical engineering or a related field, with basic analog circuit knowledge, CMOS and ADC familiarity and simulation experience. Strong analytical skills and good communication are also expected.

  SPICE, Cadence, Oscilloscope, Function generator

• 1 mois

  Associate Analog Design Engineer

  Toronto, ON

  AD

  Analog Devices

  Candidates need a Bachelor's degree in electrical engineering or a related field, with 0-2 years of experience. Knowledge of analog circuits, CMOS technology, simulation tools such as SPICE and Cadence Virtuoso, and lab equipment is required.

  SPICE, Cadence Virtuoso, Oscilloscope, Function generator, Spectrum analyzer

• 1 mois

  Firmware Engineer II

  Ottawa, ON

  Temps plein

  AN

  Adtran Networks Canada Inc.

  Candidates need a bachelor's degree in electrical or computer engineering or a related field, plus proficiency in C for embedded software, debugging and real-time operating system experience. Familiarity with ARM microcontrollers, UART, SPI and I2C, schematics and oscilloscopes, and strong communication skills are also required.

  C, oscilloscope, ARM microcontroller, FPGA, ASIC

• 1 mois

  Certification Manager

  Kitchener, ON

  Sur placeTemps plein

  CD

  CS Digital (Canada) Inc.

  5+ ansCandidates need a Bachelor's degree in electrical engineering or a related field and 5+ years in certification, compliance or power electronics. They need hands-on work with UL, IEC, CSA, IEEE or NEC standards, test equipment, and third-party labs.

  grid simulators, power analyzers, load banks, oscilloscopes, data acquisition tools, power supplies

• 1 mois

  Concepteur logiciel

  Québec, QC

  Temps plein

  OS

  Opsens Solutions Inc.

  Baccalauréat en génie informatique, logiciel ou électrique; Expérience avec C, C++, C#, HTML et Java; Connaissance de Linux et RT-Linux embarqué

  Code Composer Studio, STM32, STM Cube, oscilloscope, multimètre, JTAG

• 1 mois

  Field Service Support

  Montréal, QC

  Temps plein

  EL

  Elekta LTD

  3+ ansGrade d'associé ou expérience équivalente, idéalement en électronique ou physique; Trois à cinq ans d'expérience en services terrain ou certification de niveau 2 dans deux modalités; Bonnes aptitudes en électromécanique

  oscilloscope, multimètre, équipement de radiothérapie

• 1 mois

  Electronic Technologist for Naval and UXV testing – NETE

  Dartmouth, NS

  Temps plein

  WC

  Weir Canada, Inc.

  Candidates need a diploma in electrical or electronics engineering technology, or equivalent hands-on industry experience, plus practical experience with measurement systems, electronic circuits and test equipment. Canadian citizenship and a Government of Canada security clearance are mandatory.

  Oscilloscope, Multimeter, Power supplies, Data acquisition systems, Microsoft Word, Microsoft Excel

• 1 mois

  Electronic Engineering Technologist – Onsite Position

  Ottawa, ON

  Temps plein

  DD

  D4S DY-4 Systems Inc.

  Candidates need a Computer Systems Technology or Electronic Technologist program, board-level development and hands-on lab experience (co-op counts), and strong debugging and problem-solving skills. Python test automation experience and strong written and verbal communication are required.

  oscilloscope, logic analyzer, Python, SAP, MES, CAD tools

16 entreprises