Emplois “optical components” au Canada – Page 17

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Sr Optical Firmware Integration Engineer

  Canada

  Sur placeTemps plein

  N

  Nokia

  3+ ansCandidates need 3 to 5 years of directly related experience in optical coherent firmware validation, strong Python skills, knowledge of CMIS and module hardware interfaces, and a graduate-equivalent degree.

  Python, optical test equipment

  1 mois

  Staff Optical Firmware Integration Engineer

  Ottawa, ON

  Sur placeTemps plein

  N

  Nokia

  6+ ansNokia needs 6+ years of directly related experience and a graduate-equivalent degree. Candidates need deep knowledge of 400G/800G ZR/ZR+ coherent optics, CMIS, Python test automation, and optical module HW/SW interfaces.

  Optical test equipment, Python

  1 mois

  VP, Optical Engineering & Manufacturing

  Ottawa, ON

  HybrideTemps plein

  N

  Nokia

  15+ ansNokia needs a senior leader with 15+ years in optical networking, photonics, telecom hardware or high-tech manufacturing. Candidates must have scaled products to volume production and led complex global programs with executive presence.

  Optical engineering, Supply chain management, Firmware, Manufacturing processes, Process improvement, Leadership

  1 mois

  Staff Optical Engineer

  Ottawa, ON

  HybrideTemps plein

  N

  Nokia

  3+ ansCandidates need a master's or PhD in optical, electrical or applied physics engineering and at least 3 years of coherent optical communication experience. Strong skills in DSP, high-speed optical testing and Python test automation are required.

  Python, optical spectrum analyzer, wave analyzer, real-time oscilloscope, Git, GitHub

  1 mois

  Principal Optical Engineer

  Ottawa, ON

  Sur placeTemps plein

  N

  Nokia

  7+ ansCandidates need a master's or PhD in optics, physics or electrical engineering, or equivalent experience, plus 7+ years in optical engineering on high-speed coherent systems. Strong skills in optical calibration, coherent DSP concepts, lab instruments and Python are required.

  OSA, real-time oscilloscope, wave/spectrum analyzer, optical switches/attenuators, power meter, Python

• 1 mois

  Junior Hardware Engineering Developer

  Ottawa, ON

  Sur placeTemps plein

  

  General Dynamics Missions System International

  Candidates need a Bachelor's degree in Electrical Engineering or equivalent from an accredited university, plus strong electronic circuit design and computer systems knowledge. Strong technical writing, teamwork, and the ability to read schematics and bills of materials are also required. Experience in engineering environments and AI/ML familiarity are assets.

  LTSpice, Siemens DX Designer

• 1 mois

  Industrial Maintenance Technician, MRF, $3000 Sign on Bonus

  Cambridge, ON

  Sur placeTemps plein

  W

  WM

  2+ ansCandidates need at least 2 years of relevant work experience, must be over 18 and legally eligible to work in Canada, and must be able to do the physical demands of the job. Red Seal, millwright 433A or lead technician experience is preferred.

  balers, conveyor belts, hydraulic power packs, optical sorters, compressors, forklifts

  1 mois

  Industrial Maintenance Technician, Afternoon Shift, $1000 Sign on Bonus, Tool & Boot Allowance

  Etobicoke, ON

  Sur placeTemps plein

  W

  WM

  2+ ansCandidates need at least 2 years of relevant work experience, be over 18, and be legally eligible to work in Canada with a valid SIN. Red Seal Millwright or Electrical certification is preferred, and candidates must pass a drug screen and physical.

  balers, conveyors, forklifts, front-end loaders, compressors, hydraulic power packs

• 1 mois

  Territory Sales Manager

  Mississauga, ON +1

  HybrideTemps plein

  HG

  Hoya Global

  3+ ansHoya Global needs candidates with 3-5 years of sales experience and a proven record of meeting quotas and winning new business. A post-secondary degree or diploma, or relevant experience, is required, and optical industry experience with a dispensing licence is an asset.

  Salesforce, Excel, PowerPoint, Outlook, laptop

  1 mois

  Optical Supply Chain Analyst

  Mississauga, ON

  Sur placeTemps plein

  HG

  Hoya Global

  3+ ansCandidates need a degree or diploma in a related field, 3 to 5 years of supply chain or analytics experience, and prior optical experience. Strong ERP, Excel and Power BI skills are required, with SQL preferred.

  Power BI, Microsoft Excel, SAP, Microsoft Dynamics, Oracle, DVI

• 1 mois

  Principal Advanced Optical Packaging Engineer

  Ottawa, ON

  HybrideTemps plein

  R

  Ranovus

  10+ ansCandidates need 10+ years in optical, photonic, optoelectronic or semiconductor packaging, with hands-on experience in flip-chip, die attach, laser and fiber alignment. A bachelor's degree in an engineering, physics or optics field is required, and a master's or PhD is preferred.

  SolidWorks

  1 mois

  Optical Engineer

  Ottawa, ON

  Sur placeTemps plein

  R

  Ranovus

  2+ ansCandidates need a Bachelor's or Master's in optical engineering, physics, electrical engineering or a related field, plus 2 to 5 years on optical systems or opto-electronic devices. Python or Matlab scripting, lab troubleshooting and strong written and verbal communication are also required.

  oscilloscope, network analyzer, spectrum analyzer, BERT, Python, Matlab

  1 mois

  Silicon Photonics Layout Designer

  Ottawa, ON

  HybrideTemps plein

  R

  Ranovus

  3+ ansCandidates need a degree in electrical engineering, photonics, physics or a related field, and 3+ years of IC or photonic layout experience. Strong Cadence Virtuoso skills and experience running and debugging DRC and LVS are required.

  Cadence Virtuoso, DRC, LVS, PDK

• 1 mois

  Pea Protein Process Operator

  Yorkton, SK

  Sur placeTemps plein

  

  Louis Dreyfus Company

  3+ ansCandidates need Grade 12 or GED, at least 3 years of work in high-sensitivity food manufacturing, and a valid driver's licence. A degree in chemical engineering or food science is preferred, along with strong mechanical aptitude, computer and ERP/MES skills, and the physical stamina to lift 50 lbs and work 12-hour shifts.

  SAP, HMI, centrifuge, decanter, spray dryer, bucket elevator

• 1 mois

  Software Engineer, Layer1

  Vancouver, BC

  Sur placeTemps plein

  

  Arista Networks

  3+ ansCandidates need a computer science or electrical or computer engineering degree plus about 3 years of experience, or equivalent work experience. They need expert C or C++ and Python skills, Linux or UNIX knowledge, and strong troubleshooting and independent design ability.

  C, C++, Python, Linux, UNIX

  1 mois

  Senior/Lead Software Engineer, Layer1

  Vancouver, BC

  TélétravailTemps plein

  

  Arista Networks

  8+ ansCandidates need a computer science or engineering degree with 8 years of experience (or the equivalent in master's or PhD years), expert knowledge of C or C++ and Python, and Linux or UNIX skills. Strong troubleshooting skills and the ability to work independently and in small teams are also required.

  C, C++, Python, Linux, UNIX

• 1 mois

  Electrical Engineer - Kitchener, Ontario

  Kitchener, ON

  HybrideTemps plein

  

  Nicoya: Nicoya is a Canadian biotechnology company dedicated to improving human life by helping scientists succeed.

  10+ ansCandidates need a BS in Electrical Engineering or a related field and 5+ years of hardware engineering experience, including analog, digital and mixed-signal board design, Altium Designer, and full product lifecycle work from concept to end-of-life.

  Altium Designer, Python, C, C++

• 1 mois

  Senior RF Electrical Developer

  Mississauga, ON

  120k–150k $/anSur placeTemps plein

  

  Profound Medical: (NASDAQ:PROF) is a commercial-stage medical technology company based in Mississauga, Ontario, advancing the standard of care for prostate cancer and…

  7+ ansCandidates need 7+ years of RF or system design experience, ideally in MRI or harsh electromagnetic environments. They need strong knowledge of RF coupling, shielding, grounding and filtering, hands-on use of VNA, spectrum analyzers and oscilloscopes, and a bachelor's degree in electrical engineering or RF engineering.

  VNA, spectrum analyzer, oscilloscope

• 1 mois

  Engineering Intern (Labs)

  Waterloo, ON

  Sur placeTemps plein

  C

  CSMC

  Candidates need to be in the fourth year of a bachelor's or pursuing a graduate degree in engineering or a related field, with hands-on project experience, embedded and microcontroller skills, Python, CAD and 3D printing. They must be legally authorized to work in Canada and able to obtain Government of Canada security clearance.

  CAD software, Python, microcontroller

• 1 mois

  Senior Optical Engineer

  Edmonton, AB

  Sur placeTemps plein

  PM

  Pulse Medica

  5+ ansCandidates need a Master's or Doctorate in optical science, optical engineering or engineering physics, and at least 5 years of hands-on work with optical imaging and test equipment. Strong problem-solving, technical leadership and mentoring experience is also required.

  CODEV, Zemax, Matlab, Python, optical test equipment, OCT systems

• 1 mois

  Senior Mechanical Engineer

  Ottawa, ON

  105k–170k $/anSur placeTemps plein

  

  Mission Control Space Services

  8+ ansMission Control Space Services needs candidates with a Bachelor's or Master's in mechanical or aerospace engineering and 8 to 12+ years of aerospace design experience. They must have delivered flight-ready hardware, use FEA tools such as ANSYS or NASTRAN, and have hands-on environmental testing experience.

  ANSYS, NASTRAN, Thermal Desktop

• 1 mois

  Electronics Engineering Research Specialist

  Edmonton, AB

  Sur placeTemps plein

  

  Pegasus Imagery: Pegasus is an aerospace company developing advanced technologies to unlock the full potential of intelligent, connected flight.

  2+ ansCandidates need a Ph.D. in electrical or electronics engineering, physics or a similar field, completed within the past five years. They also need 2 to 5 years of hardware design experience, hands-on microwave lab testing skills, and experience with Altium Designer or KiCad.

  Altium Designer, KiCad, Microwave test equipment

• 1 mois

  OptoMechanical Engineer

  Sherbrooke, QC

  Sur placeTemps plein

  

  SBQuantum

  5+ ansCandidates need a bachelor's degree in mechanical engineering, engineering physics or a related field, with a background in optics. At least 5 years of precision optomechanical design is required, and experience taking products from prototype to manufacturing is essential.

  Zemax, Python

  1 mois

  Electrical Engineer

  Sherbrooke, QC

  Sur placeTemps plein

  

  SBQuantum

  5+ ansCandidates need a bachelor's in electrical engineering and 5+ years of PCB design and electronic system development. They must know analog and digital circuit design, low-noise electronics, Altium Designer, embedded C and microcontroller communication protocols.

  Altium Designer, FPGA, microcontrollers

14 entreprises